Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 Calculator

✖Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.ⓘ Equivalent Dynamic Load on Bearing [P_eq]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or Thrust Load Acting on Bearing [F_a]			+10% -10%

✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 [F_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing))
F_r = (P_eq-(0.55*F_a))
This formula uses 3 Variables

Variables Used

Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Equivalent Dynamic Load on Bearing - (Measured in Newton) - Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.
Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

STEP 1: Convert Input(s) to Base Unit

Equivalent Dynamic Load on Bearing: 9650 Newton --> 9650 Newton No Conversion Required
Axial or Thrust Load Acting on Bearing: 3000 Newton --> 3000 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_r = (P_eq-(0.55*F_a)) --> (9650-(0.55*3000))

Evaluating ... ...

F_r = 8000

STEP 3: Convert Result to Output's Unit

8000 Newton --> No Conversion Required

FINAL ANSWER

8000 Newton <-- Radial Load Acting on Bearing

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Angular Contact Bearing » Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Angular Contact Bearing Calculators

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is greater than 1.14

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = (0.57*Radial Load Acting on Bearing)+(0.93*Axial or Thrust Load Acting on Bearing)

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing)

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14

LaTeX Go Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing))

Axial Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-Radial Load Acting on Bearing)/0.55

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 Formula

LaTeX Go

Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing))
F_r = (P_eq-(0.55*F_a))

What is angular contact bearing?

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

How to Calculate Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14?

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 calculator uses Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing)) to calculate the Radial Load Acting on Bearing, Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 is the load acting in the radial direction onto the Bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14. Radial Load Acting on Bearing is denoted by F_r symbol.

How to calculate Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 using this online calculator? To use this online calculator for Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14, enter Equivalent Dynamic Load on Bearing (P_eq) & Axial or Thrust Load Acting on Bearing (F_a) and hit the calculate button. Here is how the Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 calculation can be explained with given input values -> 8000 = (9650-(0.55*3000)).

FAQ

What is Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14?

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 is the load acting in the radial direction onto the Bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14 and is represented as F_r = (P_eq-(0.55*F_a)) or Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing)). Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing & Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

How to calculate Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14?

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14 is the load acting in the radial direction onto the Bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14 is calculated using Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing)). To calculate Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14, you need Equivalent Dynamic Load on Bearing (P_eq) & Axial or Thrust Load Acting on Bearing (F_a). With our tool, you need to enter the respective value for Equivalent Dynamic Load on Bearing & Axial or Thrust Load Acting on Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Radial Load Acting on Bearing?

In this formula, Radial Load Acting on Bearing uses Equivalent Dynamic Load on Bearing & Axial or Thrust Load Acting on Bearing. We can use 2 other way(s) to calculate the same, which is/are as follows -

Radial Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(0.93*Axial or Thrust Load Acting on Bearing))/0.57
Radial Load Acting on Bearing = (Equivalent dynamic load on singly bearing-(0.57*Axial or Thrust Load Acting on Bearing))/0.35

Home

FREE PDFs

🔍 Search