Radial Distance from Well 2 given Aquifer Constant Calculator

✖Radial distance at Observation Well 1 refers to the horizontal distance from the center of a pumping well to the observation well, where groundwater levels are monitored.ⓘ Radial Distance at Observation Well 1 [r₁]			+10% -10%
✖Aquifer Constant refers to the product of the hydraulic conductivity (K) and the thickness (b) of an aquifer and also known as coefficient of transmissibility.ⓘ Aquifer Constant [T]			+10% -10%
✖Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.ⓘ Drawdown in Well 1 [s₁]			+10% -10%
✖Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well.ⓘ Drawdown in Well 2 [s₂]			+10% -10%
✖Discharge refers to the volume of water that flows through the aquifer over a given period.ⓘ Discharge [Q_w]			+10% -10%

✖Radial distance at Observation Well 2 refers to the horizontal distance from the center of a pumping well to the observation well, where groundwater levels are monitored.ⓘ Radial Distance from Well 2 given Aquifer Constant [r₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Confined Aquifers Formulas PDF PDF Image

Radial Distance from Well 2 given Aquifer Constant Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)
r₂ = r₁*10^((2.72*T*(s₁-s₂))/Q_w)
This formula uses 6 Variables

Variables Used

Radial Distance at Observation Well 2 - (Measured in Meter) - Radial distance at Observation Well 2 refers to the horizontal distance from the center of a pumping well to the observation well, where groundwater levels are monitored.
Radial Distance at Observation Well 1 - (Measured in Meter) - Radial distance at Observation Well 1 refers to the horizontal distance from the center of a pumping well to the observation well, where groundwater levels are monitored.
Aquifer Constant - Aquifer Constant refers to the product of the hydraulic conductivity (K) and the thickness (b) of an aquifer and also known as coefficient of transmissibility.
Drawdown in Well 1 - (Measured in Meter) - Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.
Drawdown in Well 2 - (Measured in Meter) - Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well.
Discharge - (Measured in Cubic Meter per Second) - Discharge refers to the volume of water that flows through the aquifer over a given period.

STEP 1: Convert Input(s) to Base Unit

Radial Distance at Observation Well 1: 1.07 Meter --> 1.07 Meter No Conversion Required
Aquifer Constant: 24.67 --> No Conversion Required
Drawdown in Well 1: 2.15 Meter --> 2.15 Meter No Conversion Required
Drawdown in Well 2: 2.136 Meter --> 2.136 Meter No Conversion Required
Discharge: 0.911 Cubic Meter per Second --> 0.911 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r₂ = r₁*10^((2.72*T*(s₁-s₂))/Q_w) --> 1.07*10^((2.72*24.67*(2.15-2.136))/0.911)

Evaluating ... ...

r₂ = 11.4972822659638

STEP 3: Convert Result to Output's Unit

11.4972822659638 Meter --> No Conversion Required

FINAL ANSWER

11.4972822659638 ≈ 11.49728 Meter <-- Radial Distance at Observation Well 2

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Confined Aquifers » Radial Distance from Well And Thickness of Aquifer » Radial Distance from Well 2 given Aquifer Constant

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Radial Distance from Well And Thickness of Aquifer Calculators

Radial Distance from Well 1 given Aquifer Constant

LaTeX Go Radial Distance at Observation Well 1 = Radial Distance at Observation Well 2/10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)

Radial Distance from Well 2 given Aquifer Constant

LaTeX Go Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1

LaTeX Go Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 2

LaTeX Go Thickness of Aquifer = Depth of Water in Well 2+Drawdown in Well 2

Radial Distance from Well 2 given Aquifer Constant Formula

LaTeX Go

Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)
r₂ = r₁*10^((2.72*T*(s₁-s₂))/Q_w)

What is Aquifer?

An aquifer is a body of rock and/or sediment that holds groundwater. Groundwater is the word used to describe precipitation that has infiltrated the soil beyond the surface and collected in empty spaces underground.

How to Calculate Radial Distance from Well 2 given Aquifer Constant?

Radial Distance from Well 2 given Aquifer Constant calculator uses Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge) to calculate the Radial Distance at Observation Well 2, Radial Distance from Well 2 given Aquifer Constant formula is defined as a measure of the distance from the center of the well to a point in a confined aquifer, which is essential in understanding the flow of groundwater and predicting the behavior of the aquifer system. Radial Distance at Observation Well 2 is denoted by r₂ symbol.

How to calculate Radial Distance from Well 2 given Aquifer Constant using this online calculator? To use this online calculator for Radial Distance from Well 2 given Aquifer Constant, enter Radial Distance at Observation Well 1 (r₁), Aquifer Constant (T), Drawdown in Well 1 (s₁), Drawdown in Well 2 (s₂) & Discharge (Q_w) and hit the calculate button. Here is how the Radial Distance from Well 2 given Aquifer Constant calculation can be explained with given input values -> 11.49728 = 1.07*10^((2.72*24.67*(2.15-2.136))/0.911).

FAQ

What is Radial Distance from Well 2 given Aquifer Constant?

Radial Distance from Well 2 given Aquifer Constant formula is defined as a measure of the distance from the center of the well to a point in a confined aquifer, which is essential in understanding the flow of groundwater and predicting the behavior of the aquifer system and is represented as r₂ = r₁*10^((2.72*T*(s₁-s₂))/Q_w) or Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge). Radial distance at Observation Well 1 refers to the horizontal distance from the center of a pumping well to the observation well, where groundwater levels are monitored, Aquifer Constant refers to the product of the hydraulic conductivity (K) and the thickness (b) of an aquifer and also known as coefficient of transmissibility, Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well, Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well & Discharge refers to the volume of water that flows through the aquifer over a given period.

How to calculate Radial Distance from Well 2 given Aquifer Constant?

Radial Distance from Well 2 given Aquifer Constant formula is defined as a measure of the distance from the center of the well to a point in a confined aquifer, which is essential in understanding the flow of groundwater and predicting the behavior of the aquifer system is calculated using Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge). To calculate Radial Distance from Well 2 given Aquifer Constant, you need Radial Distance at Observation Well 1 (r₁), Aquifer Constant (T), Drawdown in Well 1 (s₁), Drawdown in Well 2 (s₂) & Discharge (Q_w). With our tool, you need to enter the respective value for Radial Distance at Observation Well 1, Aquifer Constant, Drawdown in Well 1, Drawdown in Well 2 & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search