Radial Clearance given Leakage Calculator

✖The Depth of U Collar is the distance from the top or surface to the bottom of U collar.ⓘ Depth of U Collar [l]			+10% -10%
✖The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance.ⓘ Absolute Viscosity of Oil in Seals [μ]			+10% -10%
✖Fluid Leakage From Packingless Seals is the fluid leaking from the packingless seal.ⓘ Fluid Leakage From Packingless Seals [Q_l]			+10% -10%
✖Diameter of Seal Bolt is the nominal diameter of the bolt used in the packingless seal.ⓘ Diameter of Seal Bolt [d]			+10% -10%
✖Fluid Pressure 1 For Seal refers to the pressure exerted by the fluid on one side of the packingless seal.ⓘ Fluid Pressure 1 For Seal [p₁]			+10% -10%
✖Fluid Pressure 2 For Seal refers to the pressure exerted by the fluid on the other side of the packingless seal.ⓘ Fluid Pressure 2 For Seal [p₂]			+10% -10%

✖Radial Clearance For Seals is a measured value of the total clearance in the seal used.ⓘ Radial Clearance given Leakage [c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Seals Formulas PDF PDF Image

Radial Clearance given Leakage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radial Clearance For Seals = ((12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Diameter of Seal Bolt*Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))^(1/3)
c = ((12*l*μ*Q_l)/(pi*d*p₁-p₂))^(1/3)
This formula uses 1 Constants, 7 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Radial Clearance For Seals - (Measured in Meter) - Radial Clearance For Seals is a measured value of the total clearance in the seal used.
Depth of U Collar - (Measured in Meter) - The Depth of U Collar is the distance from the top or surface to the bottom of U collar.
Absolute Viscosity of Oil in Seals - (Measured in Pascal Second) - The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance.
Fluid Leakage From Packingless Seals - (Measured in Cubic Meter per Second) - Fluid Leakage From Packingless Seals is the fluid leaking from the packingless seal.
Diameter of Seal Bolt - (Measured in Meter) - Diameter of Seal Bolt is the nominal diameter of the bolt used in the packingless seal.
Fluid Pressure 1 For Seal - (Measured in Pascal) - Fluid Pressure 1 For Seal refers to the pressure exerted by the fluid on one side of the packingless seal.
Fluid Pressure 2 For Seal - (Measured in Pascal) - Fluid Pressure 2 For Seal refers to the pressure exerted by the fluid on the other side of the packingless seal.

STEP 1: Convert Input(s) to Base Unit

Depth of U Collar: 0.038262 Millimeter --> 3.8262E-05 Meter (Check conversion here)
Absolute Viscosity of Oil in Seals: 7.8 Centipoise --> 0.0078 Pascal Second (Check conversion here)
Fluid Leakage From Packingless Seals: 1100000 Cubic Millimeter per Second --> 0.0011 Cubic Meter per Second (Check conversion here)
Diameter of Seal Bolt: 12.6 Millimeter --> 0.0126 Meter (Check conversion here)
Fluid Pressure 1 For Seal: 200.8501 Megapascal --> 200850100 Pascal (Check conversion here)
Fluid Pressure 2 For Seal: 2.85 Megapascal --> 2850000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

c = ((12*l*μ*Q_l)/(pi*d*p₁-p₂))^(1/3) --> ((12*3.8262E-05*0.0078*0.0011)/(pi*0.0126*200850100-2850000))^(1/3)

Evaluating ... ...

c = 9.17505847890092E-06

STEP 3: Convert Result to Output's Unit

9.17505847890092E-06 Meter -->0.00917505847890092 Millimeter (Check conversion here)

FINAL ANSWER

0.00917505847890092 ≈ 0.009175 Millimeter <-- Radial Clearance For Seals

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Seals » Mechanical » Packingless Seals » Radial Clearance given Leakage

Credits

Created by sanjay shiva

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh

sanjay shiva has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Packingless Seals Calculators

Radial Clearance given Leakage

LaTeX Go Radial Clearance For Seals = ((12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Diameter of Seal Bolt*Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))^(1/3)

Diameter of Bolt given Leakage of Fluid

LaTeX Go Diameter of Seal Bolt = (12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Radial Clearance For Seals^3*(Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))

Depth of U Collar given Leakage

LaTeX Go Depth of U Collar = (pi*Radial Clearance For Seals^3)/12*(Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal)*Diameter of Seal Bolt/(Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)

Leakage of Fluid past Rod

LaTeX Go Fluid Leakage From Packingless Seals = (pi*Radial Clearance For Seals^3)/12*(Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal)*Diameter of Seal Bolt/(Depth of U Collar*Absolute Viscosity of Oil in Seals)

Radial Clearance given Leakage Formula

LaTeX Go

What is Radial clearance?

Radial clearance is a measured value of total movement of one ring relative to the other in a plane perpendicular to the bearing axis.

How to Calculate Radial Clearance given Leakage?

Radial Clearance given Leakage calculator uses Radial Clearance For Seals = ((12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Diameter of Seal Bolt*Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))^(1/3) to calculate the Radial Clearance For Seals, The Radial Clearance given Leakage formula is defined as the measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis. Radial Clearance For Seals is denoted by c symbol.

How to calculate Radial Clearance given Leakage using this online calculator? To use this online calculator for Radial Clearance given Leakage, enter Depth of U Collar (l), Absolute Viscosity of Oil in Seals (μ), Fluid Leakage From Packingless Seals (Q_l), Diameter of Seal Bolt (d), Fluid Pressure 1 For Seal (p₁) & Fluid Pressure 2 For Seal (p₂) and hit the calculate button. Here is how the Radial Clearance given Leakage calculation can be explained with given input values -> -11.290442 = ((12*3.8262E-05*0.0078*0.0011)/(pi*0.0126*200850100-2850000))^(1/3).

FAQ

What is Radial Clearance given Leakage?

The Radial Clearance given Leakage formula is defined as the measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis and is represented as c = ((12*l*μ*Q_l)/(pi*d*p₁-p₂))^(1/3) or Radial Clearance For Seals = ((12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Diameter of Seal Bolt*Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))^(1/3). The Depth of U Collar is the distance from the top or surface to the bottom of U collar, The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance, Fluid Leakage From Packingless Seals is the fluid leaking from the packingless seal, Diameter of Seal Bolt is the nominal diameter of the bolt used in the packingless seal, Fluid Pressure 1 For Seal refers to the pressure exerted by the fluid on one side of the packingless seal & Fluid Pressure 2 For Seal refers to the pressure exerted by the fluid on the other side of the packingless seal.

How to calculate Radial Clearance given Leakage?

The Radial Clearance given Leakage formula is defined as the measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis is calculated using Radial Clearance For Seals = ((12*Depth of U Collar*Absolute Viscosity of Oil in Seals*Fluid Leakage From Packingless Seals)/(pi*Diameter of Seal Bolt*Fluid Pressure 1 For Seal-Fluid Pressure 2 For Seal))^(1/3). To calculate Radial Clearance given Leakage, you need Depth of U Collar (l), Absolute Viscosity of Oil in Seals (μ), Fluid Leakage From Packingless Seals (Q_l), Diameter of Seal Bolt (d), Fluid Pressure 1 For Seal (p₁) & Fluid Pressure 2 For Seal (p₂). With our tool, you need to enter the respective value for Depth of U Collar, Absolute Viscosity of Oil in Seals, Fluid Leakage From Packingless Seals, Diameter of Seal Bolt, Fluid Pressure 1 For Seal & Fluid Pressure 2 For Seal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search