LCM of three numbers

Quantization Step Size in Image Processing Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Digital Image Processing Amplifiers Analog Communications Analog Electronics More >>

⤿

Basics of Image Processing Intensity Transformation

✖Nominal Dynamic Range is the range of signal amplitudes within which a system is expected to operate optimally, providing faithful reproduction or transmission of information.ⓘ Nominal Dynamic Range [R_b]			+10% -10%
✖Bits Allotted Exponent Number represent the number of binary digits reserved for encoding the exponent component of a floating-point number, determining its range and precision.ⓘ Bits Allotted Exponent Number [ε_b]			+10% -10%
✖Bits Allotted to Mantissa Number represent the number of binary digits reserved for encoding the fractional part of a floating-point number, determining its precision and range.ⓘ Bits Allotted to Mantissa Number [μ_b]			+10% -10%

✖Quantization Step Size is the difference between two adjacent quantization levels. It determines the spacing or granularity of the quantization.ⓘ Quantization Step Size in Image Processing [Δ_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Basics of Image Processing Formulas PDF PDF Image

Quantization Step Size in Image Processing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Quantization Step Size = (2^(Nominal Dynamic Range-Bits Allotted Exponent Number))*(1+Bits Allotted to Mantissa Number/2^11)
Δ_b = (2^(R_b-ε_b))*(1+μ_b/2^11)
This formula uses 4 Variables

Variables Used

Quantization Step Size - (Measured in Watt per Square Meter) - Quantization Step Size is the difference between two adjacent quantization levels. It determines the spacing or granularity of the quantization.
Nominal Dynamic Range - (Measured in Decibel) - Nominal Dynamic Range is the range of signal amplitudes within which a system is expected to operate optimally, providing faithful reproduction or transmission of information.
Bits Allotted Exponent Number - Bits Allotted Exponent Number represent the number of binary digits reserved for encoding the exponent component of a floating-point number, determining its range and precision.
Bits Allotted to Mantissa Number - Bits Allotted to Mantissa Number represent the number of binary digits reserved for encoding the fractional part of a floating-point number, determining its precision and range.

STEP 1: Convert Input(s) to Base Unit

Nominal Dynamic Range: 21 Decibel --> 21 Decibel No Conversion Required
Bits Allotted Exponent Number: 2.245 --> No Conversion Required
Bits Allotted to Mantissa Number: 3.24 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Δ_b = (2^(R_b-ε_b))*(1+μ_b/2^11) --> (2^(21-2.245))*(1+3.24/2^11)

Evaluating ... ...

Δ_b = 443102.390695357

STEP 3: Convert Result to Output's Unit

443102.390695357 Watt per Square Meter -->443.102390695357 Kilowatt per Square Meter (Check conversion here)

FINAL ANSWER

443.102390695357 ≈ 443.1024 Kilowatt per Square Meter <-- Quantization Step Size

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Digital Image Processing » Basics of Image Processing » Quantization Step Size in Image Processing

Credits

Created by banuprakash

Dayananda Sagar College of Engineering (DSCE), Bangalore

banuprakash has created this Calculator and 50+ more calculators!

Verified by Dipanjona Mallick

Heritage Insitute of technology (HITK), Kolkata

Dipanjona Mallick has verified this Calculator and 50+ more calculators!

< Basics of Image Processing Calculators

Bilinear Interpolation

LaTeX Go Bilinear Interpolation = Coefficient a*X Co-ordinate+Coefficient b*Y Co-ordinate+Coefficient c*X Co-ordinate*Y Co-ordinate+Coefficient d

Digital Image Row

LaTeX Go Digital Image Row = sqrt(Number of Bits/Digital Image Column)

Digital Image Column

LaTeX Go Digital Image Column = Number of Bits/(Digital Image Row^2)

Number of Grey Level

LaTeX Go Grey Level Image = 2^Digital Image Column

Quantization Step Size in Image Processing Formula

LaTeX Go

Quantization Step Size = (2^(Nominal Dynamic Range-Bits Allotted Exponent Number))*(1+Bits Allotted to Mantissa Number/2^11)
Δ_b = (2^(R_b-ε_b))*(1+μ_b/2^11)

How does the quantization step size affect image quality?

The quantization step size is inversely proportional to image quality. A smaller step size results in finer quantization levels and higher image fidelity, while a larger step size leads to a coarser representation with lower image quality.

How to Calculate Quantization Step Size in Image Processing?

Quantization Step Size in Image Processing calculator uses Quantization Step Size = (2^(Nominal Dynamic Range-Bits Allotted Exponent Number))*(1+Bits Allotted to Mantissa Number/2^11) to calculate the Quantization Step Size, The Quantization Step Size in Image Processing formula is defined as the process of reducing the number of distinct intensity levels in an image. It also determines the size of the intervals between the quantized levels. Quantization Step Size is denoted by Δ_b symbol.

How to calculate Quantization Step Size in Image Processing using this online calculator? To use this online calculator for Quantization Step Size in Image Processing, enter Nominal Dynamic Range (R_b), Bits Allotted Exponent Number (ε_b) & Bits Allotted to Mantissa Number (μ_b) and hit the calculate button. Here is how the Quantization Step Size in Image Processing calculation can be explained with given input values -> 443102.4 = (2^(21-2.245))*(1+3.24/2^11).

FAQ

What is Quantization Step Size in Image Processing?

The Quantization Step Size in Image Processing formula is defined as the process of reducing the number of distinct intensity levels in an image. It also determines the size of the intervals between the quantized levels and is represented as Δ_b = (2^(R_b-ε_b))*(1+μ_b/2^11) or Quantization Step Size = (2^(Nominal Dynamic Range-Bits Allotted Exponent Number))*(1+Bits Allotted to Mantissa Number/2^11). Nominal Dynamic Range is the range of signal amplitudes within which a system is expected to operate optimally, providing faithful reproduction or transmission of information, Bits Allotted Exponent Number represent the number of binary digits reserved for encoding the exponent component of a floating-point number, determining its range and precision & Bits Allotted to Mantissa Number represent the number of binary digits reserved for encoding the fractional part of a floating-point number, determining its precision and range.

How to calculate Quantization Step Size in Image Processing?

The Quantization Step Size in Image Processing formula is defined as the process of reducing the number of distinct intensity levels in an image. It also determines the size of the intervals between the quantized levels is calculated using Quantization Step Size = (2^(Nominal Dynamic Range-Bits Allotted Exponent Number))*(1+Bits Allotted to Mantissa Number/2^11). To calculate Quantization Step Size in Image Processing, you need Nominal Dynamic Range (R_b), Bits Allotted Exponent Number (ε_b) & Bits Allotted to Mantissa Number (μ_b). With our tool, you need to enter the respective value for Nominal Dynamic Range, Bits Allotted Exponent Number & Bits Allotted to Mantissa Number and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search