✖Sanitary System Sewer Flow Rate is the measure of the volume of wastewater flowing through a sewer system per unit of time.ⓘ Sanitary System Sewer Flow Rate [SS_fr]			+10% -10%
✖Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows.ⓘ Cross Sectional Area [A]			+10% -10%
✖Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer.ⓘ Population Density of Area [P_d]			+10% -10%

✖Discharge refers to the volume of wastewater flowing through the sewer system per unit of time. It is usually measured in cubic meters per second (m³/s) or liters per second (L/s).ⓘ Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate [Q]

⎘ Copy

👎

Formula

✖

Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate

Formula

`"Q" = "SS"_{"fr"}/("A"*"P"_{"d"})`

Example

`"1.010101m³/s"="1.2L/s"/("50m²"*"23.76Hundred/km²")`

Calculator

LaTeX

Reset

👍

Download Sanitary System Sewer Design Formulas PDF PDF Image

Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area)
Q = SS_fr/(A*P_d)
This formula uses 4 Variables

Variables Used

Discharge - (Measured in Cubic Meter per Second) - Discharge refers to the volume of wastewater flowing through the sewer system per unit of time. It is usually measured in cubic meters per second (m³/s) or liters per second (L/s).
Sanitary System Sewer Flow Rate - (Measured in Cubic Meter per Second) - Sanitary System Sewer Flow Rate is the measure of the volume of wastewater flowing through a sewer system per unit of time.
Cross Sectional Area - (Measured in Square Meter) - Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows.
Population Density of Area - (Measured in Hundred per Square Meter) - Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer.

STEP 1: Convert Input(s) to Base Unit

Sanitary System Sewer Flow Rate: 1.2 Liter per Second --> 0.0012 Cubic Meter per Second (Check conversion here)
Cross Sectional Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Population Density of Area: 23.76 Hundred per Square Kilometer --> 2.376E-05 Hundred per Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = SS_fr/(A*P_d) --> 0.0012/(50*2.376E-05)

Evaluating ... ...

Q = 1.01010101010101

STEP 3: Convert Result to Output's Unit

1.01010101010101 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

1.01010101010101 ≈ 1.010101 Cubic Meter per Second <-- Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sanitary System Sewer Design » Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 10+ Sanitary System Sewer Design Calculators

Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate

Go Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area)

Population Density given Sanitary Sewer System Flow Rate

Go Population Density of Area = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Discharge)

Sanitary Sewer System Flow Rate

Go Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge

Manning's Formula for Conveyance Factor given Flow Rate through Pipe

Go Conveyance Factor = Waste Water Flow/sqrt(Hydraulic Gradient)

Fire Demand for Cities of Less than 200,000 Population

Go Fire Demand = 1020*Population in Thousands^0.5*(1-0.01*(Population in Thousands^0.5))

Sewer System Length given Total Infiltration to Sanitary Sewer

Go Length of a Sanitary Sewer = Infiltration/Actual Infiltration

Infiltration given Total Infiltration to Sanitary Sewer

Go Infiltration = Actual Infiltration/Length of a Sanitary Sewer

Flow Rate through Pipe using Manning Formula

Go Waste Water Flow = Conveyance Factor*(Hydraulic Gradient)^1/2

Total Infiltration to Sanitary Sewer

Go Actual Infiltration = Infiltration*Length of a Sanitary Sewer

Manning's Formula for Pipe Slope given Flow Rate through Pipe

Go Hydraulic Gradient = (Waste Water Flow/Conveyance Factor)^2

Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate Formula

Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area)
Q = SS_fr/(A*P_d)

What is Flow Rate?

Flow Rate is a measurement of how much fluid (liquid or gas) passes through a given surface per unit of time. It is a crucial parameter in various fields such as fluid dynamics, civil engineering, and environmental science.

How to Calculate Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate?

Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate calculator uses Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area) to calculate the Discharge, The Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate is the total amount of sewage which is being generated by the people living in that particular area. Discharge is denoted by Q symbol.

How to calculate Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate using this online calculator? To use this online calculator for Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate, enter Sanitary System Sewer Flow Rate (SS_fr), Cross Sectional Area (A) & Population Density of Area (P_d) and hit the calculate button. Here is how the Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate calculation can be explained with given input values -> 1.010101 = 0.0012/(50*2.376E-05).

FAQ

What is Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate?

The Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate is the total amount of sewage which is being generated by the people living in that particular area and is represented as Q = SS_fr/(A*P_d) or Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area). Sanitary System Sewer Flow Rate is the measure of the volume of wastewater flowing through a sewer system per unit of time, Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows & Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer.

How to calculate Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate?

The Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate is the total amount of sewage which is being generated by the people living in that particular area is calculated using Discharge = Sanitary System Sewer Flow Rate/(Cross Sectional Area*Population Density of Area). To calculate Quantity of Sewage Produced Per Day given Sanitary Sewer System Flow Rate, you need Sanitary System Sewer Flow Rate (SS_fr), Cross Sectional Area (A) & Population Density of Area (P_d). With our tool, you need to enter the respective value for Sanitary System Sewer Flow Rate, Cross Sectional Area & Population Density of Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search