Quantity of Lubricating Oil Calculator

✖Engine power is the power that the engine can put out.ⓘ Engine power [HP]			+10% -10%
✖Operating Factor is the ratio of time worked to reference time.ⓘ Operating Factor [η]			+10% -10%
✖Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.ⓘ Crankcase Capacity [C]			+10% -10%
✖The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.ⓘ Time between Change of Oil [t]			+10% -10%

✖Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.ⓘ Quantity of Lubricating Oil [Q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Construction Management Formulas PDF PDF Image

Quantity of Lubricating Oil Solution

STEP 0: Pre-Calculation Summary

Formula Used

Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil))
Q = (HP*η*0.0027/0.74)+(C/(5*t))
This formula uses 5 Variables

Variables Used

Quantity of Oil - (Measured in Liter per hour) - Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.
Engine power - (Measured in Horsepower) - Engine power is the power that the engine can put out.
Operating Factor - Operating Factor is the ratio of time worked to reference time.
Crankcase Capacity - (Measured in Liter) - Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.
Time between Change of Oil - (Measured in Hour) - The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.

STEP 1: Convert Input(s) to Base Unit

Engine power: 160 Horsepower --> 160 Horsepower No Conversion Required
Operating Factor: 0.6 --> No Conversion Required
Crankcase Capacity: 30 Liter --> 30 Liter No Conversion Required
Time between Change of Oil: 100 Hour --> 100 Hour No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = (HP*η*0.0027/0.74)+(C/(5*t)) --> (160*0.6*0.0027/0.74)+(30/(5*100))

Evaluating ... ...

Q = 0.41027027027027

STEP 3: Convert Result to Output's Unit

1.13963963963964E-07 Cubic Meter per Second -->0.41027027027027 Liter per hour (Check conversion here)

FINAL ANSWER

0.41027027027027 ≈ 0.41027 Liter per hour <-- Quantity of Oil

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Construction Practice, Planning and Management » Construction Management » Management of Construction Equipment » Quantity of Lubricating Oil

Credits

Created by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Management of Construction Equipment Calculators

Average Investment when Salvage value is 0

LaTeX Go Average Investment = ((1+Useful Life)/(2*Useful Life))*Capital Cost

Book Value for New Machine

LaTeX Go Book Value = (Hourly Depreciation*Life Span)/0.9

Life Span of Machine

LaTeX Go Life Span = 0.9*Book Value/Hourly Depreciation

Hourly Depreciation

LaTeX Go Hourly Depreciation = 0.9*Book Value/Life Span

Quantity of Lubricating Oil Formula

LaTeX Go

Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil))
Q = (HP*η*0.0027/0.74)+(C/(5*t))

What are the factors affecting the Cost of Owning and Operating the Construction Equipment?

The different major costs contributing to the cost of owning and operating construction equipment are as follows:
1. Depreciation Cost
2. Investment Cost
3. Maintenance and Repair Cost
4. Operation Costs
a. Repair charges
b. Depreciation on tyres and tubes
c. Labour charges
d. Fuel charges
e. Operation and maintenance crew charges
f. Miscellaneous supplies
5. Downtime Cost
6. Obsolescence Cost
7. Replacement Cost

How to Calculate Quantity of Lubricating Oil?

Quantity of Lubricating Oil calculator uses Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)) to calculate the Quantity of Oil, The Quantity of Lubricating Oil formula is defined as calculating the cost of fuel used for the construction equipment. Quantity of Oil is denoted by Q symbol.

How to calculate Quantity of Lubricating Oil using this online calculator? To use this online calculator for Quantity of Lubricating Oil, enter Engine power (HP), Operating Factor (η), Crankcase Capacity (C) & Time between Change of Oil (t) and hit the calculate button. Here is how the Quantity of Lubricating Oil calculation can be explained with given input values -> 1.5E+6 = (119311.97952*0.6*0.0027/0.74)+(0.03/(5*360000)).

FAQ

What is Quantity of Lubricating Oil?

The Quantity of Lubricating Oil formula is defined as calculating the cost of fuel used for the construction equipment and is represented as Q = (HP*η*0.0027/0.74)+(C/(5*t)) or Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)). Engine power is the power that the engine can put out, Operating Factor is the ratio of time worked to reference time, Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine & The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.

How to calculate Quantity of Lubricating Oil?

The Quantity of Lubricating Oil formula is defined as calculating the cost of fuel used for the construction equipment is calculated using Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)). To calculate Quantity of Lubricating Oil, you need Engine power (HP), Operating Factor (η), Crankcase Capacity (C) & Time between Change of Oil (t). With our tool, you need to enter the respective value for Engine power, Operating Factor, Crankcase Capacity & Time between Change of Oil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search