Q-Factor of Wide Microstrip Lines Calculator

✖Conductor Attenuation Constant is a parameter that characterizes the loss of electromagnetic energy in a conductor.ⓘ Conductor Attenuation Constant [α]

+10%

-10%

✖Q-Factor of Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line.ⓘ Q-Factor of Wide Microstrip Lines [Q_ms]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Microwave Tubes and Circuits Formula PDF PDF Image

Q-Factor of Wide Microstrip Lines Solution

STEP 0: Pre-Calculation Summary

Formula Used

Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant
Q_ms = 27.3/α
This formula uses 2 Variables

Variables Used

Q-Factor of Microstrip Lines - Q-Factor of Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line.
Conductor Attenuation Constant - (Measured in Decibel per Meter) - Conductor Attenuation Constant is a parameter that characterizes the loss of electromagnetic energy in a conductor.

STEP 1: Convert Input(s) to Base Unit

Conductor Attenuation Constant: 7.8 Decibel per Meter --> 7.8 Decibel per Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_ms = 27.3/α --> 27.3/7.8

Evaluating ... ...

Q_ms = 3.5

STEP 3: Convert Result to Output's Unit

3.5 --> No Conversion Required

FINAL ANSWER

3.5 <-- Q-Factor of Microstrip Lines

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Tubes and Circuits » Q Factor » Q-Factor of Wide Microstrip Lines

Credits

Created by Simran Shravan Nishad

Sinhgad College Of Engineering (SCOE), Pune

Simran Shravan Nishad has created this Calculator and 25+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Q Factor Calculators

Q-Factor of Loaded Catcher Cavity

LaTeX Go Q Factor of Loaded Catcher Cavity = (1/Q Factor of Catcher Wall)+(1/Q Factor of Beam Loading)+(1/Q Factor of External Load)

Q-Factor of Catcher Wall

LaTeX Go Q Factor of Catcher Wall = 1/(Q Factor of Loaded Catcher Cavity-(1/Q Factor of Beam Loading)-(1/Q Factor of External Load))

Q-Factor of Beam Loading

LaTeX Go Q Factor of Beam Loading = 1/(Q Factor of Loaded Catcher Cavity-(1/Q Factor of Catcher Wall)-(1/Q Factor of External Load))

Quality Factor of Cavity Resonator

LaTeX Go Q factor of Cavity Resonator = Resonant Frequency/(Frequency 2-Frequency 1)

Q-Factor of Wide Microstrip Lines Formula

LaTeX Go

Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant
Q_ms = 27.3/α

What affects the Quality factor of microstrip lines?

Conductor Losses ,Dielectric Losses, Radiation Losses, Frequency are some factors on which quality factor of microstrip lines depends.

How to Calculate Q-Factor of Wide Microstrip Lines?

Q-Factor of Wide Microstrip Lines calculator uses Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant to calculate the Q-Factor of Microstrip Lines, The Q-Factor of Wide Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line. Q-Factor of Microstrip Lines is denoted by Q_ms symbol.

How to calculate Q-Factor of Wide Microstrip Lines using this online calculator? To use this online calculator for Q-Factor of Wide Microstrip Lines, enter Conductor Attenuation Constant (α) and hit the calculate button. Here is how the Q-Factor of Wide Microstrip Lines calculation can be explained with given input values -> 9.1 = 27.3/7.8.

FAQ

What is Q-Factor of Wide Microstrip Lines?

The Q-Factor of Wide Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line and is represented as Q_ms = 27.3/α or Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant. Conductor Attenuation Constant is a parameter that characterizes the loss of electromagnetic energy in a conductor.

How to calculate Q-Factor of Wide Microstrip Lines?

The Q-Factor of Wide Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line is calculated using Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant. To calculate Q-Factor of Wide Microstrip Lines, you need Conductor Attenuation Constant (α). With our tool, you need to enter the respective value for Conductor Attenuation Constant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Q-Factor of Microstrip Lines?

In this formula, Q-Factor of Microstrip Lines uses Conductor Attenuation Constant. We can use 1 other way(s) to calculate the same, which is/are as follows -

Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency)

Home

FREE PDFs

🔍 Search