Q-Factor of Microstrip Lines given Height and Frequency Calculator

✖Height refers to a vertical measurement typically from the base to the top of an object or structure.ⓘ Height [h]			+10% -10%
✖Conductivity refers to the ability of a material to conduct electric current.ⓘ Conductivity [σ]			+10% -10%
✖Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second.ⓘ Frequency [f]			+10% -10%

✖Q-Factor of Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line.ⓘ Q-Factor of Microstrip Lines given Height and Frequency [Q_ms]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Microwave Tubes and Circuits Formula PDF PDF Image

Q-Factor of Microstrip Lines given Height and Frequency Solution

STEP 0: Pre-Calculation Summary

Formula Used

Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency)
Q_ms = 0.63*h*sqrt(σ*f)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Q-Factor of Microstrip Lines - Q-Factor of Microstrip Lines refers to the figure of merit that characterizes the losses in the transmission line.
Height - (Measured in Meter) - Height refers to a vertical measurement typically from the base to the top of an object or structure.
Conductivity - (Measured in Siemens per Meter) - Conductivity refers to the ability of a material to conduct electric current.
Frequency - (Measured in Hertz) - Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second.

STEP 1: Convert Input(s) to Base Unit

Height: 3 Centimeter --> 0.03 Meter (Check conversion here)
Conductivity: 382 Siemens per Meter --> 382 Siemens per Meter No Conversion Required
Frequency: 90 Hertz --> 90 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_ms = 0.63*h*sqrt(σ*f) --> 0.63*0.03*sqrt(382*90)

Evaluating ... ...

Q_ms = 3.5044086234342

STEP 3: Convert Result to Output's Unit

3.5044086234342 --> No Conversion Required

FINAL ANSWER

3.5044086234342 ≈ 3.504409 <-- Q-Factor of Microstrip Lines

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Tubes and Circuits » Q Factor » Q-Factor of Microstrip Lines given Height and Frequency

Credits

Created by Simran Shravan Nishad

Sinhgad College Of Engineering (SCOE), Pune

Simran Shravan Nishad has created this Calculator and 25+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Q Factor Calculators

Q-Factor of Loaded Catcher Cavity

LaTeX Go Q Factor of Loaded Catcher Cavity = (1/Q Factor of Catcher Wall)+(1/Q Factor of Beam Loading)+(1/Q Factor of External Load)

Q-Factor of Catcher Wall

LaTeX Go Q Factor of Catcher Wall = 1/(Q Factor of Loaded Catcher Cavity-(1/Q Factor of Beam Loading)-(1/Q Factor of External Load))

Q-Factor of Beam Loading

LaTeX Go Q Factor of Beam Loading = 1/(Q Factor of Loaded Catcher Cavity-(1/Q Factor of Catcher Wall)-(1/Q Factor of External Load))

Quality Factor of Cavity Resonator

LaTeX Go Q factor of Cavity Resonator = Resonant Frequency/(Frequency 2-Frequency 1)

Q-Factor of Microstrip Lines given Height and Frequency Formula

LaTeX Go

Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency)
Q_ms = 0.63*h*sqrt(σ*f)

What affects the Quality factor of microstrip lines?

Conductor Losses ,Dielectric Losses, Radiation Losses, Frequency are some factors on which quality factor of microstrip lines depends.

How to Calculate Q-Factor of Microstrip Lines given Height and Frequency?

Q-Factor of Microstrip Lines given Height and Frequency calculator uses Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency) to calculate the Q-Factor of Microstrip Lines, The Q-Factor of Microstrip Lines given Height and Frequency refers to the figure of merit that characterizes the losses in the transmission line. Q-Factor of Microstrip Lines is denoted by Q_ms symbol.

How to calculate Q-Factor of Microstrip Lines given Height and Frequency using this online calculator? To use this online calculator for Q-Factor of Microstrip Lines given Height and Frequency, enter Height (h), Conductivity (σ) & Frequency (f) and hit the calculate button. Here is how the Q-Factor of Microstrip Lines given Height and Frequency calculation can be explained with given input values -> 0.310559 = 0.63*0.03*sqrt(382*90).

FAQ

What is Q-Factor of Microstrip Lines given Height and Frequency?

The Q-Factor of Microstrip Lines given Height and Frequency refers to the figure of merit that characterizes the losses in the transmission line and is represented as Q_ms = 0.63*h*sqrt(σ*f) or Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency). Height refers to a vertical measurement typically from the base to the top of an object or structure, Conductivity refers to the ability of a material to conduct electric current & Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second.

How to calculate Q-Factor of Microstrip Lines given Height and Frequency?

The Q-Factor of Microstrip Lines given Height and Frequency refers to the figure of merit that characterizes the losses in the transmission line is calculated using Q-Factor of Microstrip Lines = 0.63*Height*sqrt(Conductivity*Frequency). To calculate Q-Factor of Microstrip Lines given Height and Frequency, you need Height (h), Conductivity (σ) & Frequency (f). With our tool, you need to enter the respective value for Height, Conductivity & Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Q-Factor of Microstrip Lines?

In this formula, Q-Factor of Microstrip Lines uses Height, Conductivity & Frequency. We can use 1 other way(s) to calculate the same, which is/are as follows -

Q-Factor of Microstrip Lines = 27.3/Conductor Attenuation Constant

Home

FREE PDFs

🔍 Search