Pusher Cycle Time given Number of Scrapers Pusher can Load Calculator

✖Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around.ⓘ Scraper Cycle Time [T_s]			+10% -10%
✖Number of Scraper a Pusher can load calculates the scraper number when scraper and pusher cycle time is known.ⓘ Number of Scraper a Pusher [N_p]			+10% -10%

✖Pusher Cycle Time consists of maneuver time and load time.ⓘ Pusher Cycle Time given Number of Scrapers Pusher can Load [T_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Pusher Cycle Time given Number of Scrapers Pusher can Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher)
T_p = (T_s/N_p)
This formula uses 3 Variables

Variables Used

Pusher Cycle Time - (Measured in Second) - Pusher Cycle Time consists of maneuver time and load time.
Scraper Cycle Time - (Measured in Second) - Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around.
Number of Scraper a Pusher - Number of Scraper a Pusher can load calculates the scraper number when scraper and pusher cycle time is known.

STEP 1: Convert Input(s) to Base Unit

Scraper Cycle Time: 7.2 Minute --> 432 Second (Check conversion here)
Number of Scraper a Pusher: 12 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_p = (T_s/N_p) --> (432/12)

Evaluating ... ...

T_p = 36

STEP 3: Convert Result to Output's Unit

36 Second -->0.6 Minute (Check conversion here)

FINAL ANSWER

0.6 Minute <-- Pusher Cycle Time

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Pusher Cycle Time given Number of Scrapers Pusher can Load

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Pusher Cycle Time given Number of Scrapers Pusher can Load Formula

LaTeX Go

Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher)
T_p = (T_s/N_p)

What is Scraper?

Scraper, in engineering, machine for moving earth over short distances (up to about two miles) over relatively smooth areas. Either self-propelled or towed, it consists of a wagon with a gate having a bladed bottom. The blade scrapes up earth as the wagon pushes forward and forces the excavated material into the wagon.

How to Calculate Pusher Cycle Time given Number of Scrapers Pusher can Load?

Pusher Cycle Time given Number of Scrapers Pusher can Load calculator uses Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher) to calculate the Pusher Cycle Time, The Pusher Cycle Time given Number of Scrapers Pusher can Load is defined as the time required by the pusher. Pusher Cycle Time is denoted by T_p symbol.

How to calculate Pusher Cycle Time given Number of Scrapers Pusher can Load using this online calculator? To use this online calculator for Pusher Cycle Time given Number of Scrapers Pusher can Load, enter Scraper Cycle Time (T_s) & Number of Scraper a Pusher (N_p) and hit the calculate button. Here is how the Pusher Cycle Time given Number of Scrapers Pusher can Load calculation can be explained with given input values -> 0.01 = (432/12).

FAQ

What is Pusher Cycle Time given Number of Scrapers Pusher can Load?

The Pusher Cycle Time given Number of Scrapers Pusher can Load is defined as the time required by the pusher and is represented as T_p = (T_s/N_p) or Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher). Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around & Number of Scraper a Pusher can load calculates the scraper number when scraper and pusher cycle time is known.

How to calculate Pusher Cycle Time given Number of Scrapers Pusher can Load?

The Pusher Cycle Time given Number of Scrapers Pusher can Load is defined as the time required by the pusher is calculated using Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher). To calculate Pusher Cycle Time given Number of Scrapers Pusher can Load, you need Scraper Cycle Time (T_s) & Number of Scraper a Pusher (N_p). With our tool, you need to enter the respective value for Scraper Cycle Time & Number of Scraper a Pusher and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search