LCM calculator

Proportionate Velocity given Velocity while Running Partially Full Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Hydraulic Designs of Sewers and S. W. Drain Sections Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Hydraulic Characteristics of Circular Sewers Sections Design of Storm Water Drains Egg Shaped Sewers and Hydraulically Equivalent Sections Flow Velocity in Sewers and Drains More >>

⤿

Circular Sewer Section Running Full Circular Sewer Section Running Partially Full

⤿

Proportionate Velocity Proportionate Area Proportionate Depth Proportionate Discharge More >>

✖Velocity in a Partially Running Sewer is the speed of flow when the sewer isn't fully filled, influenced by depth and slope.ⓘ Velocity in a Partially Running Sewer [V_s]			+10% -10%
✖Velocity while Running Full refers to the speed of fluid flow in a pipe when it's completely filled, influenced by pipe slope and roughness.ⓘ Velocity While Running Full [V]			+10% -10%

✖Proportionate Velocity is ratio of velocity when water is partially full to velocity when water is totally full.ⓘ Proportionate Velocity given Velocity while Running Partially Full [P_v]

⎘ Copy

👎

Formula

✖

Proportionate Velocity given Velocity while Running Partially Full

Formula

P v = \frac{V s}{V}

Example

0.765391 = \frac{4.6 m/s}{6.01 m/s}

Calculator

LaTeX

Reset

👍

Download Circular Sewer Section Running Full Formulas PDF PDF Image

Proportionate Velocity given Velocity while Running Partially Full Solution

STEP 0: Pre-Calculation Summary

Formula Used

Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full
P_v = V_s/V
This formula uses 3 Variables

Variables Used

Proportionate Velocity - Proportionate Velocity is ratio of velocity when water is partially full to velocity when water is totally full.
Velocity in a Partially Running Sewer - (Measured in Meter per Second) - Velocity in a Partially Running Sewer is the speed of flow when the sewer isn't fully filled, influenced by depth and slope.
Velocity While Running Full - (Measured in Meter per Second) - Velocity while Running Full refers to the speed of fluid flow in a pipe when it's completely filled, influenced by pipe slope and roughness.

STEP 1: Convert Input(s) to Base Unit

Velocity in a Partially Running Sewer: 4.6 Meter per Second --> 4.6 Meter per Second No Conversion Required
Velocity While Running Full: 6.01 Meter per Second --> 6.01 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_v = V_s/V --> 4.6/6.01

Evaluating ... ...

P_v = 0.765391014975042

STEP 3: Convert Result to Output's Unit

0.765391014975042 --> No Conversion Required

FINAL ANSWER

0.765391014975042 ≈ 0.765391 <-- Proportionate Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Hydraulic Designs of Sewers and S. W. Drain Sections » Hydraulic Characteristics of Circular Sewers Sections » Circular Sewer Section Running Full » Proportionate Velocity » Proportionate Velocity given Velocity while Running Partially Full

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Proportionate Velocity Calculators

Proportionate Velocity given Roughness Coefficient

Go Proportionate Velocity = (Roughness Coefficient for Running Full/Roughness Coefficient Partially Full)*(Hydraulic Mean Depth for Partially Full/Hydraulic Mean Depth for Partially Full)^(2/3)

Proportionate Velocity given Central Angle

Go Proportionate Velocity = (1-((360*pi/180)*sin(Central Angle))/(2*pi*Central Angle))^(2/3)

Proportionate Velocity when Roughness Coefficient does not Vary with Depth

Go Proportionate Velocity = (Hydraulic Mean Depth for Partially Full/Hydraulic Mean Depth while Running Full)^(2/3)

Proportionate Velocity given Velocity while Running Partially Full

Go Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full

Proportionate Velocity given Velocity while Running Partially Full Formula

Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full
P_v = V_s/V

What is sewers ?

Sewer, conduit that carries wastewater from its source to a point of treatment and disposal. The wastewater may be domestic (sanitary) sewage, industrial sewage, storm runoff, or a mixture of the three.

How to Calculate Proportionate Velocity given Velocity while Running Partially Full?

Proportionate Velocity given Velocity while Running Partially Full calculator uses Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full to calculate the Proportionate Velocity, The Proportionate Velocity given Velocity while Running Partially Full is defined as the ratio of the fluid velocity in a partially filled pipe to the velocity when the pipe is fully filled. Proportionate Velocity is denoted by P_v symbol.

How to calculate Proportionate Velocity given Velocity while Running Partially Full using this online calculator? To use this online calculator for Proportionate Velocity given Velocity while Running Partially Full, enter Velocity in a Partially Running Sewer (V_s) & Velocity While Running Full (V) and hit the calculate button. Here is how the Proportionate Velocity given Velocity while Running Partially Full calculation can be explained with given input values -> 0.765391 = 4.6/6.01.

FAQ

What is Proportionate Velocity given Velocity while Running Partially Full?

The Proportionate Velocity given Velocity while Running Partially Full is defined as the ratio of the fluid velocity in a partially filled pipe to the velocity when the pipe is fully filled and is represented as P_v = V_s/V or Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full. Velocity in a Partially Running Sewer is the speed of flow when the sewer isn't fully filled, influenced by depth and slope & Velocity while Running Full refers to the speed of fluid flow in a pipe when it's completely filled, influenced by pipe slope and roughness.

How to calculate Proportionate Velocity given Velocity while Running Partially Full?

The Proportionate Velocity given Velocity while Running Partially Full is defined as the ratio of the fluid velocity in a partially filled pipe to the velocity when the pipe is fully filled is calculated using Proportionate Velocity = Velocity in a Partially Running Sewer/Velocity While Running Full. To calculate Proportionate Velocity given Velocity while Running Partially Full, you need Velocity in a Partially Running Sewer (V_s) & Velocity While Running Full (V). With our tool, you need to enter the respective value for Velocity in a Partially Running Sewer & Velocity While Running Full and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Proportionate Velocity?

In this formula, Proportionate Velocity uses Velocity in a Partially Running Sewer & Velocity While Running Full. We can use 3 other way(s) to calculate the same, which is/are as follows -

Proportionate Velocity = (Roughness Coefficient for Running Full/Roughness Coefficient Partially Full)*(Hydraulic Mean Depth for Partially Full/Hydraulic Mean Depth for Partially Full)^(2/3)
Proportionate Velocity = (1-((360*pi/180)*sin(Central Angle))/(2*pi*Central Angle))^(2/3)
Proportionate Velocity = (Hydraulic Mean Depth for Partially Full/Hydraulic Mean Depth while Running Full)^(2/3)

Home

FREE PDFs

🔍 Search