Proportionality Constant given Specific Capacity per unit well Area of Aquifer Calculator

✖The Area of the Well is referred as land area around a well that is influenced by pumping.ⓘ Area of the Well [A]			+10% -10%
✖The Specific Capacity is referred as amount of water furnished under a standard unit head.ⓘ Specific Capacity [K_s]			+10% -10%

✖The Proportionality Constant is referred as characteristics of the aquifer and the area of the well. It represents discharge per unit drawdown also called specific capacity of well.ⓘ Proportionality Constant given Specific Capacity per unit well Area of Aquifer [K₀]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Open Wells Formulas PDF PDF Image

Proportionality Constant given Specific Capacity per unit well Area of Aquifer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Proportionality Constant = Area of the Well*Specific Capacity
K₀ = A*K_s
This formula uses 3 Variables

Variables Used

Proportionality Constant - The Proportionality Constant is referred as characteristics of the aquifer and the area of the well. It represents discharge per unit drawdown also called specific capacity of well.
Area of the Well - (Measured in Square Meter) - The Area of the Well is referred as land area around a well that is influenced by pumping.
Specific Capacity - The Specific Capacity is referred as amount of water furnished under a standard unit head.

STEP 1: Convert Input(s) to Base Unit

Area of the Well: 20 Square Meter --> 20 Square Meter No Conversion Required
Specific Capacity: 0.75 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K₀ = A*K_s --> 20*0.75

Evaluating ... ...

K₀ = 15

STEP 3: Convert Result to Output's Unit

15 --> No Conversion Required

FINAL ANSWER

15 <-- Proportionality Constant

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Open Wells » Recuperation Test » Proportionality Constant given Specific Capacity per unit well Area of Aquifer

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Recuperation Test Calculators

Proportionality Constant per unit Well Area of Aquifer

LaTeX Go Proportionality Constant = Area of the Well*((1/Time Interval)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time))

Equation for Time Interval

LaTeX Go Time Interval = (Area of the Well/Proportionality Constant)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Area of Well given Time Interval

LaTeX Go Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Discharge from Open Well under Depression Head

LaTeX Go Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head

Proportionality Constant given Specific Capacity per unit well Area of Aquifer Formula

LaTeX Go

Proportionality Constant = Area of the Well*Specific Capacity
K₀ = A*K_s

What is Groundwater Recharge?

Groundwater Recharge or deep drainage or deep percolation is a hydrologic process, where water moves downward from surface water to groundwater. Recharge is the primary method through which water enters an aquifer.

How to Calculate Proportionality Constant given Specific Capacity per unit well Area of Aquifer?

Proportionality Constant given Specific Capacity per unit well Area of Aquifer calculator uses Proportionality Constant = Area of the Well*Specific Capacity to calculate the Proportionality Constant, The Proportionality Constant given Specific Capacity per unit well Area of Aquifer formula is defined as aquifer parameter depending on characteristic of aquifer and area of well, which also represents discharge per unit drawdown. Proportionality Constant is denoted by K₀ symbol.

How to calculate Proportionality Constant given Specific Capacity per unit well Area of Aquifer using this online calculator? To use this online calculator for Proportionality Constant given Specific Capacity per unit well Area of Aquifer, enter Area of the Well (A) & Specific Capacity (K_s) and hit the calculate button. Here is how the Proportionality Constant given Specific Capacity per unit well Area of Aquifer calculation can be explained with given input values -> 15 = 20*0.75.

FAQ

What is Proportionality Constant given Specific Capacity per unit well Area of Aquifer?

The Proportionality Constant given Specific Capacity per unit well Area of Aquifer formula is defined as aquifer parameter depending on characteristic of aquifer and area of well, which also represents discharge per unit drawdown and is represented as K₀ = A*K_s or Proportionality Constant = Area of the Well*Specific Capacity. The Area of the Well is referred as land area around a well that is influenced by pumping & The Specific Capacity is referred as amount of water furnished under a standard unit head.

How to calculate Proportionality Constant given Specific Capacity per unit well Area of Aquifer?

The Proportionality Constant given Specific Capacity per unit well Area of Aquifer formula is defined as aquifer parameter depending on characteristic of aquifer and area of well, which also represents discharge per unit drawdown is calculated using Proportionality Constant = Area of the Well*Specific Capacity. To calculate Proportionality Constant given Specific Capacity per unit well Area of Aquifer, you need Area of the Well (A) & Specific Capacity (K_s). With our tool, you need to enter the respective value for Area of the Well & Specific Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Proportionality Constant?

In this formula, Proportionality Constant uses Area of the Well & Specific Capacity. We can use 1 other way(s) to calculate the same, which is/are as follows -

Proportionality Constant = Area of the Well*((1/Time Interval)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time))

Home

FREE PDFs

🔍 Search