Propagation velocity of tide wave Calculator

✖Average Depth refers to the mean depth of the entire body of water.ⓘ Average Depth [h']			+10% -10%
✖Friction Factor in terms of Degree referred to the measure of resistance of fluid flow in terms of degree.ⓘ Friction Factor in Terms of Degree [Θ_f]			+10% -10%

✖Wave Speed is the rate at which a wave travels through a medium, measured in distance per unit time.ⓘ Propagation velocity of tide wave [v]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Prediction of Tides and Tidal Rivers Formulas PDF PDF Image

Propagation velocity of tide wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2))
v = sqrt([g]*h'*(1-tan(Θ_f)^2))
This formula uses 1 Constants, 2 Functions, 3 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Wave Speed - (Measured in Meter per Second) - Wave Speed is the rate at which a wave travels through a medium, measured in distance per unit time.
Average Depth - (Measured in Meter) - Average Depth refers to the mean depth of the entire body of water.
Friction Factor in Terms of Degree - (Measured in Radian) - Friction Factor in terms of Degree referred to the measure of resistance of fluid flow in terms of degree.

STEP 1: Convert Input(s) to Base Unit

Average Depth: 26 Meter --> 26 Meter No Conversion Required
Friction Factor in Terms of Degree: 30 Degree --> 0.5235987755982 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v = sqrt([g]*h'*(1-tan(Θ_f)^2)) --> sqrt([g]*26*(1-tan(0.5235987755982)^2))

Evaluating ... ...

v = 13.037711966957

STEP 3: Convert Result to Output's Unit

13.037711966957 Meter per Second --> No Conversion Required

FINAL ANSWER

13.037711966957 ≈ 13.03771 Meter per Second <-- Wave Speed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Tides » Prediction of Tides and Tidal Rivers » Tidal Rivers » River Navigation » Propagation velocity of tide wave

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< River Navigation Calculators

Tidal Period for Friction Factor and Propagation Velocity of Tide Wave

LaTeX Go Tidal Period = (6*(pi^2)*(Chezy's Constant^2)*Average Depth*tan(Friction Factor in Terms of Degree/0.5))/(8*[g]*Maximum Flood Current)

Friction Factor for Propagation Velocity of Tide Wave

LaTeX Go Friction Factor in Terms of Degree = 0.5*atan(Tidal Period*8*[g]*Maximum Flood Current/(6*pi^2*Chezy's Constant^2*Average Depth))

Propagation velocity of tide wave

LaTeX Go Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2))

Average Depth given Propagation Velocity of Tide Wave

LaTeX Go Average Depth = Wave Speed^2/([g]*(1-tan(Friction Factor in Terms of Degree)^2))

Propagation velocity of tide wave Formula

LaTeX Go

Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2))
v = sqrt([g]*h'*(1-tan(Θ_f)^2))

What is River Navigation?

When a stretch of river is made navigable, a lock is sometimes required to bypass an obstruction such as a rapid, dam, or mill weir – because of the change in river level across the obstacle.
In large scale river navigation improvements, weirs and locks are used together. A weir will increase the depth of a shallow stretch, and the required lock will either be built in a gap in the weir, or at the downstream end of an artificial cut which bypasses the weir and perhaps a shallow stretch of river below it. A river improved by these means is often called a Waterway or River Navigation.

How to Calculate Propagation velocity of tide wave?

Propagation velocity of tide wave calculator uses Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2)) to calculate the Wave Speed, The Propagation velocity of tide wave formula is defined as the prediction of the water depth at each shallow channel reaching at the time of arrival of the ship. Wave Speed is denoted by v symbol.

How to calculate Propagation velocity of tide wave using this online calculator? To use this online calculator for Propagation velocity of tide wave, enter Average Depth (h') & Friction Factor in Terms of Degree (Θ_f) and hit the calculate button. Here is how the Propagation velocity of tide wave calculation can be explained with given input values -> 13.03771 = sqrt([g]*26*(1-tan(0.5235987755982)^2)).

FAQ

What is Propagation velocity of tide wave?

The Propagation velocity of tide wave formula is defined as the prediction of the water depth at each shallow channel reaching at the time of arrival of the ship and is represented as v = sqrt([g]*h'*(1-tan(Θ_f)^2)) or Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2)). Average Depth refers to the mean depth of the entire body of water & Friction Factor in terms of Degree referred to the measure of resistance of fluid flow in terms of degree.

How to calculate Propagation velocity of tide wave?

The Propagation velocity of tide wave formula is defined as the prediction of the water depth at each shallow channel reaching at the time of arrival of the ship is calculated using Wave Speed = sqrt([g]*Average Depth*(1-tan(Friction Factor in Terms of Degree)^2)). To calculate Propagation velocity of tide wave, you need Average Depth (h') & Friction Factor in Terms of Degree (Θ_f). With our tool, you need to enter the respective value for Average Depth & Friction Factor in Terms of Degree and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search