Proof Load in Quarter Elliptical Spring Calculator

✖Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.ⓘ Young's Modulus [E]			+10% -10%
✖Number of Plates is the count of plates in the leaf spring.ⓘ Number of Plates [n]			+10% -10%
✖Width of Cross Section is the geometric measurement or extent of the member from side to side.ⓘ Width of Cross Section [b]			+10% -10%
✖Thickness of Section is the dimension through an object, as opposed to length or width.ⓘ Thickness of Section [t]			+10% -10%
✖Deflection of Spring is how a spring responds when force is applied or released.ⓘ Deflection of Spring [δ]			+10% -10%
✖Length in Spring is the measurement or extent of something from end to end.ⓘ Length in Spring [L]			+10% -10%

✖Proof Load on Elliptical Spring is the maximum tensile force that can be applied to a spring that will not result in plastic deformation.ⓘ Proof Load in Quarter Elliptical Spring [W_{O (Elliptical Spring)}]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Proof Load on Spring Formulas PDF PDF Image

Proof Load in Quarter Elliptical Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3)
W_{O (Elliptical Spring)} = (E*n*b*t^3*δ)/(6*L^3)
This formula uses 7 Variables

Variables Used

Proof Load on Elliptical Spring - (Measured in Newton) - Proof Load on Elliptical Spring is the maximum tensile force that can be applied to a spring that will not result in plastic deformation.
Young's Modulus - (Measured in Pascal) - Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
Number of Plates - Number of Plates is the count of plates in the leaf spring.
Width of Cross Section - (Measured in Meter) - Width of Cross Section is the geometric measurement or extent of the member from side to side.
Thickness of Section - (Measured in Meter) - Thickness of Section is the dimension through an object, as opposed to length or width.
Deflection of Spring - (Measured in Meter) - Deflection of Spring is how a spring responds when force is applied or released.
Length in Spring - (Measured in Meter) - Length in Spring is the measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Young's Modulus: 20000 Megapascal --> 20000000000 Pascal (Check conversion here)
Number of Plates: 8 --> No Conversion Required
Width of Cross Section: 300 Millimeter --> 0.3 Meter (Check conversion here)
Thickness of Section: 460 Millimeter --> 0.46 Meter (Check conversion here)
Deflection of Spring: 3.4 Millimeter --> 0.0034 Meter (Check conversion here)
Length in Spring: 4170 Millimeter --> 4.17 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_{O (Elliptical Spring)} = (E*n*b*t^3*δ)/(6*L^3) --> (20000000000*8*0.3*0.46^3*0.0034)/(6*4.17^3)

Evaluating ... ...

W_{O (Elliptical Spring)} = 36511.8832594673

STEP 3: Convert Result to Output's Unit

36511.8832594673 Newton -->36.5118832594673 Kilonewton (Check conversion here)

FINAL ANSWER

36.5118832594673 ≈ 36.51188 Kilonewton <-- Proof Load on Elliptical Spring

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Spring » Proof Load on Spring » Quarter Elliptical Springs » Proof Load in Quarter Elliptical Spring

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Quarter Elliptical Springs Calculators

Thickness given Proof Load in Quarter Elliptical Spring

LaTeX Go Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3)

Number of Plates given Proof Load in Quarter Elliptical Spring

LaTeX Go Number of Plates = (6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Width of Cross Section*Thickness of Section^3*Deflection of Spring)

Width given Proof Load in Quarter Elliptical Spring

LaTeX Go Width of Cross Section = (6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Thickness of Section^3*Deflection of Spring)

Proof Load in Quarter Elliptical Spring

LaTeX Go Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3)

Proof Load in Quarter Elliptical Spring Formula

LaTeX Go

What is Quarter Elliptical Spring?

This is an older type of spring with a similar structure to that of a normal leaf spring, only different being that it is half.

How to Calculate Proof Load in Quarter Elliptical Spring?

Proof Load in Quarter Elliptical Spring calculator uses Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3) to calculate the Proof Load on Elliptical Spring, The Proof Load in Quarter Elliptical Spring formula is defined as the maximum tensile force that can be applied to a bolt that will not result in plastic deformation. Proof Load on Elliptical Spring is denoted by W_{O (Elliptical Spring)} symbol.

How to calculate Proof Load in Quarter Elliptical Spring using this online calculator? To use this online calculator for Proof Load in Quarter Elliptical Spring, enter Young's Modulus (E), Number of Plates (n), Width of Cross Section (b), Thickness of Section (t), Deflection of Spring (δ) & Length in Spring (L) and hit the calculate button. Here is how the Proof Load in Quarter Elliptical Spring calculation can be explained with given input values -> 0.036512 = (20000000000*8*0.3*0.46^3*0.0034)/(6*4.17^3).

FAQ

What is Proof Load in Quarter Elliptical Spring?

The Proof Load in Quarter Elliptical Spring formula is defined as the maximum tensile force that can be applied to a bolt that will not result in plastic deformation and is represented as W_{O (Elliptical Spring)} = (E*n*b*t^3*δ)/(6*L^3) or Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3). Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain, Number of Plates is the count of plates in the leaf spring, Width of Cross Section is the geometric measurement or extent of the member from side to side, Thickness of Section is the dimension through an object, as opposed to length or width, Deflection of Spring is how a spring responds when force is applied or released & Length in Spring is the measurement or extent of something from end to end.

How to calculate Proof Load in Quarter Elliptical Spring?

The Proof Load in Quarter Elliptical Spring formula is defined as the maximum tensile force that can be applied to a bolt that will not result in plastic deformation is calculated using Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3). To calculate Proof Load in Quarter Elliptical Spring, you need Young's Modulus (E), Number of Plates (n), Width of Cross Section (b), Thickness of Section (t), Deflection of Spring (δ) & Length in Spring (L). With our tool, you need to enter the respective value for Young's Modulus, Number of Plates, Width of Cross Section, Thickness of Section, Deflection of Spring & Length in Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search