Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation Calculator

✖Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads.ⓘ Machining And Operating Rate [M]			+10% -10%
✖Non-Productive Time is the total time wasted in setting up the machine or workpiece for a particular process.ⓘ Non-Productive Time [NPT]			+10% -10%
✖Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition. It is usually measured in Metre.ⓘ Constant For Machining Condition [K]			+10% -10%
✖The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity [V]			+10% -10%
✖Reference Tool Life is the tool life of the tool obtained in the reference machining condition.ⓘ Reference Tool Life [L_ref]			+10% -10%
✖Reference Cutting Velocity is the cutting velocity of the tool used in the reference machining condition.ⓘ Reference Cutting Velocity [V_ref]			+10% -10%
✖Taylors Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylors Tool Life Exponent [n]			+10% -10%
✖Time to Change One Tool is the measure of time it takes to change one tool during machining.ⓘ Time to Change One Tool [t_c]			+10% -10%
✖The Cost of A Tool is simply the cost of one tool being used for machining.ⓘ Cost of A Tool [C_t]			+10% -10%

✖Production Cost of Each Component is the total amount that it takes to produce a single component from scratch.ⓘ Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation [C_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Metal Machining Formula PDF PDF Image

Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent))
C_p = M*(NPT+K/V)+(K/(L_ref*V_ref^(1/n)))*(M*t_c+C_t)*(V^((1-n)/n))
This formula uses 10 Variables

Variables Used

Production Cost of Each Component - Production Cost of Each Component is the total amount that it takes to produce a single component from scratch.
Machining And Operating Rate - Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads.
Non-Productive Time - (Measured in Second) - Non-Productive Time is the total time wasted in setting up the machine or workpiece for a particular process.
Constant For Machining Condition - (Measured in Meter) - Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition. It is usually measured in Metre.
Cutting Velocity - (Measured in Meter per Second) - The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Reference Tool Life - (Measured in Second) - Reference Tool Life is the tool life of the tool obtained in the reference machining condition.
Reference Cutting Velocity - (Measured in Meter per Second) - Reference Cutting Velocity is the cutting velocity of the tool used in the reference machining condition.
Taylors Tool Life Exponent - Taylors Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.
Time to Change One Tool - (Measured in Second) - Time to Change One Tool is the measure of time it takes to change one tool during machining.
Cost of A Tool - The Cost of A Tool is simply the cost of one tool being used for machining.

STEP 1: Convert Input(s) to Base Unit

Machining And Operating Rate: 0.00283 --> No Conversion Required
Non-Productive Time: 20 Minute --> 1200 Second (Check conversion here)
Constant For Machining Condition: 203.0681 Meter --> 203.0681 Meter No Conversion Required
Cutting Velocity: 0.28 Meter per Second --> 0.28 Meter per Second No Conversion Required
Reference Tool Life: 2 Minute --> 120 Second (Check conversion here)
Reference Cutting Velocity: 0.76 Meter per Second --> 0.76 Meter per Second No Conversion Required
Taylors Tool Life Exponent: 0.125 --> No Conversion Required
Time to Change One Tool: 5 Minute --> 300 Second (Check conversion here)
Cost of A Tool: 100 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_p = M*(NPT+K/V)+(K/(L_ref*V_ref^(1/n)))*(M*t_c+C_t)*(V^((1-n)/n)) --> 0.00283*(1200+203.0681/0.28)+(203.0681/(120*0.76^(1/0.125)))*(0.00283*300+100)*(0.28^((1-0.125)/0.125))

Evaluating ... ...

C_p = 5.65532355031639

STEP 3: Convert Result to Output's Unit

5.65532355031639 --> No Conversion Required

FINAL ANSWER

5.65532355031639 ≈ 5.655324 <-- Production Cost of Each Component

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Metal Machining Economics » Production Cost » Production Cost per Component » Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Production Cost per Component Calculators

Machining and Operating Rate given Production Cost per Component

LaTeX Go Machining And Operating Rate = (Production Cost of Each Component-((Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent))))/(Non-Productive Time+Constant For Machining Condition/Cutting Velocity+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*Time to Change One Tool*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent)))

Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation

LaTeX Go Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent))

Nonproductive Time given Production Cost per Component

LaTeX Go Setup Time = (Production Cost of Each Component-((Machining And Operating Rate*Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition*((Cutting Velocity/Reference Cutting Velocity)^(1/Taylors Tool Life Exponent))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)/(Reference Tool Life*Cutting Velocity))))/Machining And Operating Rate

Production Cost per Component for Constant-Speed-Rough-Machining given Tool Changing Cost

LaTeX Go Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Cost of Changing Each Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent))

Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation Formula

LaTeX Go

Average Production Cost of each component

The average Production Cost of each component is usually determined by taking an average over a defined batch of products. The reason for this is the extended costs such as the cost of tools and operating costs etc. This makes the Average Production Cost becomes quite higher for a single product than when measured over batch size.

How to Calculate Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation?

Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation calculator uses Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent)) to calculate the Production Cost of Each Component, The Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation is defined as the total cost of producing a single component from scratch including all necessary operations and processes. Production Cost of Each Component is denoted by C_p symbol.

How to calculate Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation using this online calculator? To use this online calculator for Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation, enter Machining And Operating Rate (M), Non-Productive Time (NPT), Constant For Machining Condition (K), Cutting Velocity (V), Reference Tool Life (L_ref), Reference Cutting Velocity (V_ref), Taylors Tool Life Exponent (n), Time to Change One Tool (t_c) & Cost of A Tool (C_t) and hit the calculate button. Here is how the Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation calculation can be explained with given input values -> 5.655324 = 0.00283*(1200+203.0681/0.28)+(203.0681/(120*0.76^(1/0.125)))*(0.00283*300+100)*(0.28^((1-0.125)/0.125)).

FAQ

What is Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation?

The Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation is defined as the total cost of producing a single component from scratch including all necessary operations and processes and is represented as C_p = M*(NPT+K/V)+(K/(L_ref*V_ref^(1/n)))*(M*t_c+C_t)*(V^((1-n)/n)) or Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent)). Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads, Non-Productive Time is the total time wasted in setting up the machine or workpiece for a particular process, Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition. It is usually measured in Metre, The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating), Reference Tool Life is the tool life of the tool obtained in the reference machining condition, Reference Cutting Velocity is the cutting velocity of the tool used in the reference machining condition, Taylors Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear, Time to Change One Tool is the measure of time it takes to change one tool during machining & The Cost of A Tool is simply the cost of one tool being used for machining.

How to calculate Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation?

The Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation is defined as the total cost of producing a single component from scratch including all necessary operations and processes is calculated using Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent)). To calculate Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation, you need Machining And Operating Rate (M), Non-Productive Time (NPT), Constant For Machining Condition (K), Cutting Velocity (V), Reference Tool Life (L_ref), Reference Cutting Velocity (V_ref), Taylors Tool Life Exponent (n), Time to Change One Tool (t_c) & Cost of A Tool (C_t). With our tool, you need to enter the respective value for Machining And Operating Rate, Non-Productive Time, Constant For Machining Condition, Cutting Velocity, Reference Tool Life, Reference Cutting Velocity, Taylors Tool Life Exponent, Time to Change One Tool & Cost of A Tool and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Production Cost of Each Component?

In this formula, Production Cost of Each Component uses Machining And Operating Rate, Non-Productive Time, Constant For Machining Condition, Cutting Velocity, Reference Tool Life, Reference Cutting Velocity, Taylors Tool Life Exponent, Time to Change One Tool & Cost of A Tool. We can use 1 other way(s) to calculate the same, which is/are as follows -

Production Cost of Each Component = Machining And Operating Rate*(Non-Productive Time+Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylors Tool Life Exponent)))*(Cost of Changing Each Tool+Cost of A Tool)*(Cutting Velocity^((1-Taylors Tool Life Exponent)/Taylors Tool Life Exponent))

Home

FREE PDFs

🔍 Search