Product of Biot and Fourier Number given System Properties Calculator

✖Convection Heat Transfer Coefficient is the rate of heat transfer between a solid surface and a fluid per unit surface area per unit temperature.ⓘ Convection Heat Transfer Coefficient [h]			+10% -10%
✖The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.ⓘ Surface Area [A]			+10% -10%
✖Time Elapsed after a particular task is started.ⓘ Time Elapsed [t]			+10% -10%
✖The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.ⓘ Density [ρ]			+10% -10%
✖Total Volume is the overall amount of space that a substance or object occupies or that is enclosed within a container.ⓘ Total Volume [V_T]			+10% -10%
✖Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.ⓘ Specific Heat Capacity [C_o]			+10% -10%

✖Product of Biot and Fourier Numbers calculates the product using the system properties which simplify the calculation of temperature in the unsteady state heat transfer.ⓘ Product of Biot and Fourier Number given System Properties [BiFo]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transient Heat Conduction Formulas PDF PDF Image

Product of Biot and Fourier Number given System Properties Solution

STEP 0: Pre-Calculation Summary

Formula Used

Product of Biot And Fourier Numbers = (Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity)
BiFo = (h*A*t)/(ρ*V_T*C_o)
This formula uses 7 Variables

Variables Used

Product of Biot And Fourier Numbers - Product of Biot and Fourier Numbers calculates the product using the system properties which simplify the calculation of temperature in the unsteady state heat transfer.
Convection Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - Convection Heat Transfer Coefficient is the rate of heat transfer between a solid surface and a fluid per unit surface area per unit temperature.
Surface Area - (Measured in Square Meter) - The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.
Time Elapsed - (Measured in Second) - Time Elapsed after a particular task is started.
Density - (Measured in Kilogram per Cubic Meter) - The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Total Volume - (Measured in Cubic Meter) - Total Volume is the overall amount of space that a substance or object occupies or that is enclosed within a container.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.

STEP 1: Convert Input(s) to Base Unit

Convection Heat Transfer Coefficient: 0.04 Watt per Square Meter per Kelvin --> 0.04 Watt per Square Meter per Kelvin No Conversion Required
Surface Area: 18 Square Meter --> 18 Square Meter No Conversion Required
Time Elapsed: 12 Second --> 12 Second No Conversion Required
Density: 5.51 Kilogram per Cubic Meter --> 5.51 Kilogram per Cubic Meter No Conversion Required
Total Volume: 63 Cubic Meter --> 63 Cubic Meter No Conversion Required
Specific Heat Capacity: 4 Joule per Kilogram per K --> 4 Joule per Kilogram per K No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

BiFo = (h*A*t)/(ρ*V_T*C_o) --> (0.04*18*12)/(5.51*63*4)

Evaluating ... ...

BiFo = 0.00622245268343272

STEP 3: Convert Result to Output's Unit

0.00622245268343272 --> No Conversion Required

FINAL ANSWER

0.00622245268343272 ≈ 0.006222 <-- Product of Biot And Fourier Numbers

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Conduction » Mechanical » Transient Heat Conduction » Product of Biot and Fourier Number given System Properties

Credits

Created by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has created this Calculator and 200+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Transient Heat Conduction Calculators

Instantaneous heat transfer rate

LaTeX Go Heat Rate = Convection Heat Transfer Coefficient*Surface Area*(Initial Temperature-Fluid Temperature)*(exp(-(Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity)))

Total Heat Transfer during Time Interval

LaTeX Go Heat Transfer = Density*Specific Heat*Total Volume*(Initial Temperature-Fluid Temperature)*(1-(exp(-(Biot Number*Fourier Number))))

Power on exponential of temperature-time relation

LaTeX Go Constant B = -(Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity)

Time Constant in unsteady state heat transfer

LaTeX Go Time Constant = (Density*Specific Heat Capacity*Total Volume)/(Convection Heat Transfer Coefficient*Surface Area)

Product of Biot and Fourier Number given System Properties Formula

LaTeX Go

Product of Biot And Fourier Numbers = (Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity)
BiFo = (h*A*t)/(ρ*V_T*C_o)

What is Biot Number?

Biot Number is the ratio of conductive resistance to convective resistance. Biot number smaller than 0.1 imply that the heat conduction inside the body is much faster than the heat convection away from its surface, and temperature gradients are negligible inside of it.

How to Calculate Product of Biot and Fourier Number given System Properties?

Product of Biot and Fourier Number given System Properties calculator uses Product of Biot And Fourier Numbers = (Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity) to calculate the Product of Biot And Fourier Numbers, Product of Biot and Fourier Number given System Properties formula calculates the product using the system properties which simplify the calculation of temperature in the unsteady state heat transfer. Product of Biot And Fourier Numbers is denoted by BiFo symbol.

How to calculate Product of Biot and Fourier Number given System Properties using this online calculator? To use this online calculator for Product of Biot and Fourier Number given System Properties, enter Convection Heat Transfer Coefficient (h), Surface Area (A), Time Elapsed (t), Density (ρ), Total Volume (V_T) & Specific Heat Capacity (C_o) and hit the calculate button. Here is how the Product of Biot and Fourier Number given System Properties calculation can be explained with given input values -> 0.006222 = (0.04*18*12)/(5.51*63*4).

FAQ

What is Product of Biot and Fourier Number given System Properties?

Product of Biot and Fourier Number given System Properties formula calculates the product using the system properties which simplify the calculation of temperature in the unsteady state heat transfer and is represented as BiFo = (h*A*t)/(ρ*V_T*C_o) or Product of Biot And Fourier Numbers = (Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity). Convection Heat Transfer Coefficient is the rate of heat transfer between a solid surface and a fluid per unit surface area per unit temperature, The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides, Time Elapsed after a particular task is started, The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object, Total Volume is the overall amount of space that a substance or object occupies or that is enclosed within a container & Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.

How to calculate Product of Biot and Fourier Number given System Properties?

Product of Biot and Fourier Number given System Properties formula calculates the product using the system properties which simplify the calculation of temperature in the unsteady state heat transfer is calculated using Product of Biot And Fourier Numbers = (Convection Heat Transfer Coefficient*Surface Area*Time Elapsed)/(Density*Total Volume*Specific Heat Capacity). To calculate Product of Biot and Fourier Number given System Properties, you need Convection Heat Transfer Coefficient (h), Surface Area (A), Time Elapsed (t), Density (ρ), Total Volume (V_T) & Specific Heat Capacity (C_o). With our tool, you need to enter the respective value for Convection Heat Transfer Coefficient, Surface Area, Time Elapsed, Density, Total Volume & Specific Heat Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search