Pressure Loss Coefficient at Inlet of Duct Calculator

✖The Cross-Sectional Area of Duct at Section 1 is defined as the area of the section at point 1.ⓘ Cross-Sectional Area of Duct at Section 1 [A₁]			+10% -10%
✖The Cross-Sectional Area of Duct at Section 2 is the area of the cross-section at section 2.ⓘ Cross-Sectional Area of Duct at Section 2 [A₂]			+10% -10%

✖Pressure Loss Coefficient at 1 is the coefficient of pressure losses caused by a change in air direction from the elbow, offset, or takeoffs.ⓘ Pressure Loss Coefficient at Inlet of Duct [C₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Ducts Formulas PDF PDF Image

Pressure Loss Coefficient at Inlet of Duct Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure Loss Coefficient at 1 = (1-Cross-Sectional Area of Duct at Section 1/Cross-Sectional Area of Duct at Section 2)^2
C₁ = (1-A₁/A₂)^2
This formula uses 3 Variables

Variables Used

Pressure Loss Coefficient at 1 - Pressure Loss Coefficient at 1 is the coefficient of pressure losses caused by a change in air direction from the elbow, offset, or takeoffs.
Cross-Sectional Area of Duct at Section 1 - (Measured in Square Meter) - The Cross-Sectional Area of Duct at Section 1 is defined as the area of the section at point 1.
Cross-Sectional Area of Duct at Section 2 - (Measured in Square Meter) - The Cross-Sectional Area of Duct at Section 2 is the area of the cross-section at section 2.

STEP 1: Convert Input(s) to Base Unit

Cross-Sectional Area of Duct at Section 1: 1.452941 Square Meter --> 1.452941 Square Meter No Conversion Required
Cross-Sectional Area of Duct at Section 2: 0.95 Square Meter --> 0.95 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C₁ = (1-A₁/A₂)^2 --> (1-1.452941/0.95)^2

Evaluating ... ...

C₁ = 0.280276619923546

STEP 3: Convert Result to Output's Unit

0.280276619923546 --> No Conversion Required

FINAL ANSWER

0.280276619923546 ≈ 0.280277 <-- Pressure Loss Coefficient at 1

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Refrigeration and Air Conditioning » Ducts » Mechanical » Pressure » Pressure Loss Coefficient at Inlet of Duct

Credits

Created by Abhishek Dharmendra Bansile

Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune

Abhishek Dharmendra Bansile has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Pressure Calculators

Dynamic Loss Coefficient given Equivalent Additional Length

LaTeX Go Dynamic Loss Coefficient = (Friction Factor in Duct*Equivalent Additional Length)/Hydraulic Mean Depth

Pressure Loss due to Sudden Enlargement

LaTeX Go Pressure Loss due to Sudden Enlargement = 0.6*(Velocity of Air at Section 1-Velocity of Air at Section 2)^2

Dynamic Loss Coefficient given Dynamic Pressure Loss

LaTeX Go Dynamic Loss Coefficient = Dynamic Pressure Loss/(0.6*Velocity of Air^2)

Dynamic Pressure Loss

LaTeX Go Dynamic Pressure Loss = Dynamic Loss Coefficient*0.6*Velocity of Air^2

Pressure Loss Coefficient at Inlet of Duct Formula

LaTeX Go

Pressure Loss Coefficient at 1 = (1-Cross-Sectional Area of Duct at Section 1/Cross-Sectional Area of Duct at Section 2)^2
C₁ = (1-A₁/A₂)^2

Causes of Dynamic Pressure loss

1. Change in air direction from elbows, offsets, and takeoffs
2. Restrictions or obstructions in the air stream - in/outlet fans, dampers, filters, and coils
3. Air velocity changes due to changes in duct sizes

How to Calculate Pressure Loss Coefficient at Inlet of Duct?

Pressure Loss Coefficient at Inlet of Duct calculator uses Pressure Loss Coefficient at 1 = (1-Cross-Sectional Area of Duct at Section 1/Cross-Sectional Area of Duct at Section 2)^2 to calculate the Pressure Loss Coefficient at 1, Pressure Loss Coefficient at Inlet of Duct formula is defined as a dimensionless quantity that characterizes the loss of pressure at the inlet of a duct due to the sudden contraction of flow area, affecting the overall performance of the duct system. Pressure Loss Coefficient at 1 is denoted by C₁ symbol.

How to calculate Pressure Loss Coefficient at Inlet of Duct using this online calculator? To use this online calculator for Pressure Loss Coefficient at Inlet of Duct, enter Cross-Sectional Area of Duct at Section 1 (A₁) & Cross-Sectional Area of Duct at Section 2 (A₂) and hit the calculate button. Here is how the Pressure Loss Coefficient at Inlet of Duct calculation can be explained with given input values -> 0.280277 = (1-1.452941/0.95)^2.

FAQ

What is Pressure Loss Coefficient at Inlet of Duct?

Pressure Loss Coefficient at Inlet of Duct formula is defined as a dimensionless quantity that characterizes the loss of pressure at the inlet of a duct due to the sudden contraction of flow area, affecting the overall performance of the duct system and is represented as C₁ = (1-A₁/A₂)^2 or Pressure Loss Coefficient at 1 = (1-Cross-Sectional Area of Duct at Section 1/Cross-Sectional Area of Duct at Section 2)^2. The Cross-Sectional Area of Duct at Section 1 is defined as the area of the section at point 1 & The Cross-Sectional Area of Duct at Section 2 is the area of the cross-section at section 2.

How to calculate Pressure Loss Coefficient at Inlet of Duct?

Pressure Loss Coefficient at Inlet of Duct formula is defined as a dimensionless quantity that characterizes the loss of pressure at the inlet of a duct due to the sudden contraction of flow area, affecting the overall performance of the duct system is calculated using Pressure Loss Coefficient at 1 = (1-Cross-Sectional Area of Duct at Section 1/Cross-Sectional Area of Duct at Section 2)^2. To calculate Pressure Loss Coefficient at Inlet of Duct, you need Cross-Sectional Area of Duct at Section 1 (A₁) & Cross-Sectional Area of Duct at Section 2 (A₂). With our tool, you need to enter the respective value for Cross-Sectional Area of Duct at Section 1 & Cross-Sectional Area of Duct at Section 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search