Pressure in Bubble Calculator

✖Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.ⓘ Surface Tension [σ]			+10% -10%
✖Diameter of Bubble is defined as their conclusion is that, with the increase of gas flow rate , the bubble frequency decreases and the bubble diameter increases.ⓘ Diameter of Bubble [d_b]			+10% -10%

✖Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.ⓘ Pressure in Bubble [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hydrostatic Fluid Formulas PDF PDF Image

Pressure in Bubble Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure = (8*Surface Tension)/Diameter of Bubble
P = (8*σ)/d_b
This formula uses 3 Variables

Variables Used

Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Surface Tension - (Measured in Newton per Meter) - Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Diameter of Bubble - (Measured in Meter) - Diameter of Bubble is defined as their conclusion is that, with the increase of gas flow rate , the bubble frequency decreases and the bubble diameter increases.

STEP 1: Convert Input(s) to Base Unit

Surface Tension: 55 Newton per Meter --> 55 Newton per Meter No Conversion Required
Diameter of Bubble: 61000 Millimeter --> 61 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = (8*σ)/d_b --> (8*55)/61

Evaluating ... ...

P = 7.21311475409836

STEP 3: Convert Result to Output's Unit

7.21311475409836 Pascal --> No Conversion Required

FINAL ANSWER

7.21311475409836 ≈ 7.213115 Pascal <-- Pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Hydrostatic Fluid » Pressure in Bubble

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Hydrostatic Fluid Calculators

Force Acting in x Direction in Momentum Equation

LaTeX Go Force in X Direction = Density of Liquid*Discharge*(Velocity at Section 1-1-Velocity at Section 2-2*cos(Theta))+Pressure at Section 1*Cross Sectional Area at Point 1-(Pressure at Section 2*Cross Sectional Area at Point 2*cos(Theta))

Force Acting in y-Direction in Momentum Equation

LaTeX Go Force in Y Direction = Density of Liquid*Discharge*(-Velocity at Section 2-2*sin(Theta)-Pressure at Section 2*Cross Sectional Area at Point 2*sin(Theta))

Fluid Dynamic or Shear Viscosity Formula

LaTeX Go Dynamic Viscosity = (Applied Force*Distance Between Two Masses)/(Area of Solid Plates*Peripheral Speed)

Center of Gravity

LaTeX Go Centre of Gravity = Moment of Inertia/(Volume of Object*(Centre of Buoyancy+Metacenter))

Pressure in Bubble Formula

LaTeX Go

Pressure = (8*Surface Tension)/Diameter of Bubble
P = (8*σ)/d_b

What is the pressure inside a bubble?

2γ/R is the Laplace pressure. The ΔP is 2 times the Laplace pressure since there is a complete sphere instead of a semi sphere on a layer of water. Based on the diameter, the pressure inside an air bubble in pure water, where γ = 72 mN/m at 25°C (298 K), can vary greatly.

Why pressure inside bubble is more than outside?

There are two free surfaces of soap bubble. Due to surface tension, the molecules on the surface film experience the net force in the inward direction normal to the surface. Therefore, there is more pressure inside than outside.

How to Calculate Pressure in Bubble?

Pressure in Bubble calculator uses Pressure = (8*Surface Tension)/Diameter of Bubble to calculate the Pressure, Pressure in Bubble formula is defined as a measure of the force exerted by a fluid on the walls of a container or pipe, specifically in the context of hydrostatic fluids, where the pressure inside a bubble is influenced by the surface tension and the diameter of the bubble. Pressure is denoted by P symbol.

How to calculate Pressure in Bubble using this online calculator? To use this online calculator for Pressure in Bubble, enter Surface Tension (σ) & Diameter of Bubble (d_b) and hit the calculate button. Here is how the Pressure in Bubble calculation can be explained with given input values -> 7.213115 = (8*55)/61.

FAQ

What is Pressure in Bubble?

Pressure in Bubble formula is defined as a measure of the force exerted by a fluid on the walls of a container or pipe, specifically in the context of hydrostatic fluids, where the pressure inside a bubble is influenced by the surface tension and the diameter of the bubble and is represented as P = (8*σ)/d_b or Pressure = (8*Surface Tension)/Diameter of Bubble. Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side & Diameter of Bubble is defined as their conclusion is that, with the increase of gas flow rate , the bubble frequency decreases and the bubble diameter increases.

How to calculate Pressure in Bubble?

Pressure in Bubble formula is defined as a measure of the force exerted by a fluid on the walls of a container or pipe, specifically in the context of hydrostatic fluids, where the pressure inside a bubble is influenced by the surface tension and the diameter of the bubble is calculated using Pressure = (8*Surface Tension)/Diameter of Bubble. To calculate Pressure in Bubble, you need Surface Tension (σ) & Diameter of Bubble (d_b). With our tool, you need to enter the respective value for Surface Tension & Diameter of Bubble and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search