Pressure Gradient given Velocity of Flow in Oil Tank Calculator

✖The Dynamic Viscosity refers to the internal resistance of a fluid to flow when a force is applied.ⓘ Dynamic Viscosity [μ]			+10% -10%
✖Fluid Velocity in Oil Tank is the volume of fluid flowing in the given vessel per unit cross sectional area.ⓘ Fluid Velocity in Oil Tank [u_Oiltank]			+10% -10%
✖Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity.ⓘ Velocity of Piston [v_piston]			+10% -10%
✖Horizontal Distance denotes the instantaneous horizontal distance cover by an object in a projectile motion.ⓘ Horizontal Distance [R]			+10% -10%
✖Hydraulic Clearance is the gap or space between two surfaces adjacent to each other.ⓘ Hydraulic Clearance [C_H]			+10% -10%

✖Pressure Gradient is the change in pressure with respect to radial distance of element.ⓘ Pressure Gradient given Velocity of Flow in Oil Tank [dp|dr]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Dash Pot Mechanism Formulas PDF PDF Image

Pressure Gradient given Velocity of Flow in Oil Tank Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure Gradient = (Dynamic Viscosity*2*(Fluid Velocity in Oil Tank-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)))/(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance)
dp|dr = (μ*2*(u_Oiltank-(v_piston*R/C_H)))/(R*R-C_H*R)
This formula uses 6 Variables

Variables Used

Pressure Gradient - (Measured in Newton per Cubic Meter) - Pressure Gradient is the change in pressure with respect to radial distance of element.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity refers to the internal resistance of a fluid to flow when a force is applied.
Fluid Velocity in Oil Tank - (Measured in Meter per Second) - Fluid Velocity in Oil Tank is the volume of fluid flowing in the given vessel per unit cross sectional area.
Velocity of Piston - (Measured in Meter per Second) - Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity.
Horizontal Distance - (Measured in Meter) - Horizontal Distance denotes the instantaneous horizontal distance cover by an object in a projectile motion.
Hydraulic Clearance - (Measured in Meter) - Hydraulic Clearance is the gap or space between two surfaces adjacent to each other.

STEP 1: Convert Input(s) to Base Unit

Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)
Fluid Velocity in Oil Tank: 12 Meter per Second --> 12 Meter per Second No Conversion Required
Velocity of Piston: 0.045 Meter per Second --> 0.045 Meter per Second No Conversion Required
Horizontal Distance: 0.7 Meter --> 0.7 Meter No Conversion Required
Hydraulic Clearance: 50 Millimeter --> 0.05 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

dp|dr = (μ*2*(u_Oiltank-(v_piston*R/C_H)))/(R*R-C_H*R) --> (1.02*2*(12-(0.045*0.7/0.05)))/(0.7*0.7-0.05*0.7)

Evaluating ... ...

dp|dr = 50.9775824175824

STEP 3: Convert Result to Output's Unit

50.9775824175824 Newton per Cubic Meter --> No Conversion Required

FINAL ANSWER

50.9775824175824 ≈ 50.97758 Newton per Cubic Meter <-- Pressure Gradient

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Laminar Flow » Dash Pot Mechanism » Pressure Gradient given Velocity of Flow in Oil Tank

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Dash Pot Mechanism Calculators

Pressure Gradient given Velocity of Flow in Oil Tank

LaTeX Go Pressure Gradient = (Dynamic Viscosity*2*(Fluid Velocity in Oil Tank-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)))/(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance)

Velocity of Flow in Oil Tank

LaTeX Go Fluid Velocity in Oil Tank = (Pressure Gradient*0.5*(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance)/Dynamic Viscosity)-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)

Pressure Gradient given Rate of Flow

LaTeX Go Pressure Gradient = (12*Dynamic Viscosity/(Radial Clearance^3))*((Discharge in Laminar Flow/pi*Diameter of Piston)+Velocity of Piston*0.5*Radial Clearance)

Pressure Drop over Piston

LaTeX Go Pressure Drop due to Friction = (6*Dynamic Viscosity*Velocity of Piston*Piston Length/(Radial Clearance^3))*(0.5*Diameter of Piston+Radial Clearance)

Pressure Gradient given Velocity of Flow in Oil Tank Formula

LaTeX Go

What is Pressure Gradient?

Pressure gradient is a physical quantity that describes in which direction and at what rate the pressure increases the most rapidly around a particular location. The pressure gradient is a dimensional quantity expressed in units of pascals per metre.

How to Calculate Pressure Gradient given Velocity of Flow in Oil Tank?

Pressure Gradient given Velocity of Flow in Oil Tank calculator uses Pressure Gradient = (Dynamic Viscosity*2*(Fluid Velocity in Oil Tank-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)))/(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance) to calculate the Pressure Gradient, The Pressure Gradient given Velocity of Flow in Oil Tank is defined as change in pressure with respect to distance in pipe. Pressure Gradient is denoted by dp|dr symbol.

How to calculate Pressure Gradient given Velocity of Flow in Oil Tank using this online calculator? To use this online calculator for Pressure Gradient given Velocity of Flow in Oil Tank, enter Dynamic Viscosity (μ), Fluid Velocity in Oil Tank (u_Oiltank), Velocity of Piston (v_piston), Horizontal Distance (R) & Hydraulic Clearance (C_H) and hit the calculate button. Here is how the Pressure Gradient given Velocity of Flow in Oil Tank calculation can be explained with given input values -> 1342.23 = (1.02*2*(12-(0.045*0.7/0.05)))/(0.7*0.7-0.05*0.7).

FAQ

What is Pressure Gradient given Velocity of Flow in Oil Tank?

The Pressure Gradient given Velocity of Flow in Oil Tank is defined as change in pressure with respect to distance in pipe and is represented as dp|dr = (μ*2*(u_Oiltank-(v_piston*R/C_H)))/(R*R-C_H*R) or Pressure Gradient = (Dynamic Viscosity*2*(Fluid Velocity in Oil Tank-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)))/(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance). The Dynamic Viscosity refers to the internal resistance of a fluid to flow when a force is applied, Fluid Velocity in Oil Tank is the volume of fluid flowing in the given vessel per unit cross sectional area, Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity, Horizontal Distance denotes the instantaneous horizontal distance cover by an object in a projectile motion & Hydraulic Clearance is the gap or space between two surfaces adjacent to each other.

How to calculate Pressure Gradient given Velocity of Flow in Oil Tank?

The Pressure Gradient given Velocity of Flow in Oil Tank is defined as change in pressure with respect to distance in pipe is calculated using Pressure Gradient = (Dynamic Viscosity*2*(Fluid Velocity in Oil Tank-(Velocity of Piston*Horizontal Distance/Hydraulic Clearance)))/(Horizontal Distance*Horizontal Distance-Hydraulic Clearance*Horizontal Distance). To calculate Pressure Gradient given Velocity of Flow in Oil Tank, you need Dynamic Viscosity (μ), Fluid Velocity in Oil Tank (u_Oiltank), Velocity of Piston (v_piston), Horizontal Distance (R) & Hydraulic Clearance (C_H). With our tool, you need to enter the respective value for Dynamic Viscosity, Fluid Velocity in Oil Tank, Velocity of Piston, Horizontal Distance & Hydraulic Clearance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Pressure Gradient?

In this formula, Pressure Gradient uses Dynamic Viscosity, Fluid Velocity in Oil Tank, Velocity of Piston, Horizontal Distance & Hydraulic Clearance. We can use 1 other way(s) to calculate the same, which is/are as follows -

Pressure Gradient = (12*Dynamic Viscosity/(Radial Clearance^3))*((Discharge in Laminar Flow/pi*Diameter of Piston)+Velocity of Piston*0.5*Radial Clearance)

Home

FREE PDFs

🔍 Search