Pressure Drop of Vapor in Condensers given Vapors on Shell Side Calculator

✖Friction Factor is a dimensionless quantity used to characterize the amount of resistance encountered by a fluid as it flows through a pipe or conduit.ⓘ Friction Factor [J_f]			+10% -10%
✖Length of tube is the length which will be used during heat transfer in a exchanger.ⓘ Length of Tube [L_Tube]			+10% -10%
✖Baffle spacing refers to the distance between adjacent baffles within the heat exchanger. Their purpose is to create turbulence on shell side fluid.ⓘ Baffle Spacing [L_Baffle]			+10% -10%
✖Shell Diameter of a heat exchanger refers to the internal diameter of the cylindrical shell that houses the tube bundle.ⓘ Shell Diameter [D_s]			+10% -10%
✖Equivalent diameter represents a single characteristic length that takes into account the cross-sectional shape and flow path of a non-circular or irregularly shaped channel or duct.ⓘ Equivalent Diameter [D_e]			+10% -10%
✖Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.ⓘ Fluid Density [ρ_fluid]			+10% -10%
✖Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe.ⓘ Fluid Velocity [V_f]			+10% -10%
✖Fluid viscosity at Bulk Temperature is a fundamental property of fluids that characterizes their resistance to flow. It is defined at the bulk temperature of the fluid.ⓘ Fluid Viscosity at Bulk Temperature [μ_fluid]			+10% -10%
✖Fluid Viscosity at Wall Temperature is defined at the temperature of the wall of pipe or surface at which the fluid is in contact with it.ⓘ Fluid Viscosity at Wall Temperature [μ_Wall]			+10% -10%

✖Shell Side Pressure Drop is defined as the reduction in pressure of the fluid that was allocated on the shell side of a Heat Exchanger.ⓘ Pressure Drop of Vapor in Condensers given Vapors on Shell Side [ΔP_Shell]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat Exchangers Formula PDF PDF Image

Pressure Drop of Vapor in Condensers given Vapors on Shell Side Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shell Side Pressure Drop = 0.5*8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter)*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14)
ΔP_Shell = 0.5*8*J_f*(L_Tube/L_Baffle)*(D_s/D_e)*(ρ_fluid/2)*(V_f^2)*((μ_fluid/μ_Wall)^-0.14)
This formula uses 10 Variables

Variables Used

Shell Side Pressure Drop - (Measured in Pascal) - Shell Side Pressure Drop is defined as the reduction in pressure of the fluid that was allocated on the shell side of a Heat Exchanger.
Friction Factor - Friction Factor is a dimensionless quantity used to characterize the amount of resistance encountered by a fluid as it flows through a pipe or conduit.
Length of Tube - (Measured in Meter) - Length of tube is the length which will be used during heat transfer in a exchanger.
Baffle Spacing - (Measured in Meter) - Baffle spacing refers to the distance between adjacent baffles within the heat exchanger. Their purpose is to create turbulence on shell side fluid.
Shell Diameter - (Measured in Meter) - Shell Diameter of a heat exchanger refers to the internal diameter of the cylindrical shell that houses the tube bundle.
Equivalent Diameter - (Measured in Meter) - Equivalent diameter represents a single characteristic length that takes into account the cross-sectional shape and flow path of a non-circular or irregularly shaped channel or duct.
Fluid Density - (Measured in Kilogram per Cubic Meter) - Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.
Fluid Velocity - (Measured in Meter per Second) - Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe.
Fluid Viscosity at Bulk Temperature - (Measured in Pascal Second) - Fluid viscosity at Bulk Temperature is a fundamental property of fluids that characterizes their resistance to flow. It is defined at the bulk temperature of the fluid.
Fluid Viscosity at Wall Temperature - (Measured in Pascal Second) - Fluid Viscosity at Wall Temperature is defined at the temperature of the wall of pipe or surface at which the fluid is in contact with it.

STEP 1: Convert Input(s) to Base Unit

Friction Factor: 0.004 --> No Conversion Required
Length of Tube: 4500 Millimeter --> 4.5 Meter (Check conversion here)
Baffle Spacing: 200 Millimeter --> 0.2 Meter (Check conversion here)
Shell Diameter: 510 Millimeter --> 0.51 Meter (Check conversion here)
Equivalent Diameter: 16.528 Millimeter --> 0.016528 Meter (Check conversion here)
Fluid Density: 995 Kilogram per Cubic Meter --> 995 Kilogram per Cubic Meter No Conversion Required
Fluid Velocity: 2.5 Meter per Second --> 2.5 Meter per Second No Conversion Required
Fluid Viscosity at Bulk Temperature: 1.005 Pascal Second --> 1.005 Pascal Second No Conversion Required
Fluid Viscosity at Wall Temperature: 1.006 Pascal Second --> 1.006 Pascal Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ΔP_Shell = 0.5*8*J_f*(L_Tube/L_Baffle)*(D_s/D_e)*(ρ_fluid/2)*(V_f^2)*((μ_fluid/μ_Wall)^-0.14) --> 0.5*8*0.004*(4.5/0.2)*(0.51/0.016528)*(995/2)*(2.5^2)*((1.005/1.006)^-0.14)

Evaluating ... ...

ΔP_Shell = 34545.0593986752

STEP 3: Convert Result to Output's Unit

34545.0593986752 Pascal --> No Conversion Required

FINAL ANSWER

34545.0593986752 ≈ 34545.06 Pascal <-- Shell Side Pressure Drop

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Heat Exchangers » Basic Formulas of Heat Exchanger Designs » Pressure Drop of Vapor in Condensers given Vapors on Shell Side

Credits

Created by Rishi Vadodaria

Malviya National Institute Of Technology (MNIT JAIPUR ), JAIPUR

Rishi Vadodaria has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Basic Formulas of Heat Exchanger Designs Calculators

Equivalent Diameter for Triangular Pitch in Heat Exchanger

LaTeX Go Equivalent Diameter = (1.10/Pipe Outer Diameter)*((Tube Pitch^2)-0.917*(Pipe Outer Diameter^2))

Equivalent Diameter for Square Pitch in Heat Exchanger

LaTeX Go Equivalent Diameter = (1.27/Pipe Outer Diameter)*((Tube Pitch^2)-0.785*(Pipe Outer Diameter^2))

Number of Tubes in Center Row Given Bundle Diameter and Tube Pitch

LaTeX Go Number of Tubes in Vertical Tube Row = Bundle Diameter/Tube Pitch

Number of Baffles in Shell and Tube Heat Exchanger

LaTeX Go Number of Baffles = (Length of Tube/Baffle Spacing)-1

Pressure Drop of Vapor in Condensers given Vapors on Shell Side Formula

LaTeX Go

What is Condenser?

Condenser is a special type of Heat Exchanger in which hot vapors transfer their latent heat to the colder fluid and thus results into condensation of vapors into liquid phase.

What is the Significance of Pressure Drop?

Pressure Drop plays a crucial role in designing a condenser.

Pressure drop can influence the temperature profiles within the condenser. An even distribution of temperatures across the condenser surface is essential for efficient heat transfer. High pressure drops may cause uneven temperature distribution, leading to hotspots and reduced heat transfer efficiency.

How to Calculate Pressure Drop of Vapor in Condensers given Vapors on Shell Side?

Pressure Drop of Vapor in Condensers given Vapors on Shell Side calculator uses Shell Side Pressure Drop = 0.5*8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter)*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14) to calculate the Shell Side Pressure Drop, The Pressure Drop of Vapor in Condensers given Vapors on Shell Side formula is defined as difference between the inlet pressure and the outlet pressure of the vapor that is to be condensed in Heat exchanger called as condenser. Shell Side Pressure Drop is denoted by ΔP_Shell symbol.

How to calculate Pressure Drop of Vapor in Condensers given Vapors on Shell Side using this online calculator? To use this online calculator for Pressure Drop of Vapor in Condensers given Vapors on Shell Side, enter Friction Factor (J_f), Length of Tube (L_Tube), Baffle Spacing (L_Baffle), Shell Diameter (D_s), Equivalent Diameter (D_e), Fluid Density (ρ_fluid), Fluid Velocity (V_f), Fluid Viscosity at Bulk Temperature (μ_fluid) & Fluid Viscosity at Wall Temperature (μ_Wall) and hit the calculate button. Here is how the Pressure Drop of Vapor in Condensers given Vapors on Shell Side calculation can be explained with given input values -> 34545.06 = 0.5*8*0.004*(4.5/0.2)*(0.51/0.016528)*(995/2)*(2.5^2)*((1.005/1.006)^-0.14).

FAQ

What is Pressure Drop of Vapor in Condensers given Vapors on Shell Side?

The Pressure Drop of Vapor in Condensers given Vapors on Shell Side formula is defined as difference between the inlet pressure and the outlet pressure of the vapor that is to be condensed in Heat exchanger called as condenser and is represented as ΔP_Shell = 0.5*8*J_f*(L_Tube/L_Baffle)*(D_s/D_e)*(ρ_fluid/2)*(V_f^2)*((μ_fluid/μ_Wall)^-0.14) or Shell Side Pressure Drop = 0.5*8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter)*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14). Friction Factor is a dimensionless quantity used to characterize the amount of resistance encountered by a fluid as it flows through a pipe or conduit, Length of tube is the length which will be used during heat transfer in a exchanger, Baffle spacing refers to the distance between adjacent baffles within the heat exchanger. Their purpose is to create turbulence on shell side fluid, Shell Diameter of a heat exchanger refers to the internal diameter of the cylindrical shell that houses the tube bundle, Equivalent diameter represents a single characteristic length that takes into account the cross-sectional shape and flow path of a non-circular or irregularly shaped channel or duct, Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies, Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe, Fluid viscosity at Bulk Temperature is a fundamental property of fluids that characterizes their resistance to flow. It is defined at the bulk temperature of the fluid & Fluid Viscosity at Wall Temperature is defined at the temperature of the wall of pipe or surface at which the fluid is in contact with it.

How to calculate Pressure Drop of Vapor in Condensers given Vapors on Shell Side?

The Pressure Drop of Vapor in Condensers given Vapors on Shell Side formula is defined as difference between the inlet pressure and the outlet pressure of the vapor that is to be condensed in Heat exchanger called as condenser is calculated using Shell Side Pressure Drop = 0.5*8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter)*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14). To calculate Pressure Drop of Vapor in Condensers given Vapors on Shell Side, you need Friction Factor (J_f), Length of Tube (L_Tube), Baffle Spacing (L_Baffle), Shell Diameter (D_s), Equivalent Diameter (D_e), Fluid Density (ρ_fluid), Fluid Velocity (V_f), Fluid Viscosity at Bulk Temperature (μ_fluid) & Fluid Viscosity at Wall Temperature (μ_Wall). With our tool, you need to enter the respective value for Friction Factor, Length of Tube, Baffle Spacing, Shell Diameter, Equivalent Diameter, Fluid Density, Fluid Velocity, Fluid Viscosity at Bulk Temperature & Fluid Viscosity at Wall Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shell Side Pressure Drop?

In this formula, Shell Side Pressure Drop uses Friction Factor, Length of Tube, Baffle Spacing, Shell Diameter, Equivalent Diameter, Fluid Density, Fluid Velocity, Fluid Viscosity at Bulk Temperature & Fluid Viscosity at Wall Temperature. We can use 1 other way(s) to calculate the same, which is/are as follows -

Shell Side Pressure Drop = (8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter))*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14)

Home

FREE PDFs

🔍 Search