Pressure on Left of Manometer Solution

STEP 0: Pre-Calculation Summary
Formula Used
Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference
Pl = Pr-ΔP
This formula uses 3 Variables
Variables Used
Pressure in Left Side Tube - (Measured in Pascal) - Pressure in Left Side Tube is the pressure at left-hand-side of tube.
Pressure in Right Side Tube - (Measured in Pascal) - Pressure in Right Side Tube is the pressure exerted at the right side of the tube.
Pressure Difference - (Measured in Pascal) - Pressure Difference is the difference in pressure intensities at two different points in a liquid.
STEP 1: Convert Input(s) to Base Unit
Pressure in Right Side Tube: 23 Pascal --> 23 Pascal No Conversion Required
Pressure Difference: 20.5 Pascal --> 20.5 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Pl = Pr-ΔP --> 23-20.5
Evaluating ... ...
Pl = 2.5
STEP 3: Convert Result to Output's Unit
2.5 Pascal --> No Conversion Required
FINAL ANSWER
2.5 Pascal <-- Pressure in Left Side Tube
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Pressure Measurement Calculators

Shear Stress in Fluid
​ LaTeX ​ Go Stress = (Viscosity Coefficient Pressure*Liquid Velocity)/Closed Stirrup Distance
Pressure Difference in Manometer
​ LaTeX ​ Go Pressure Difference = Pressure in Right Side Tube-Pressure in Left Side Tube
Pressure on right of Manometer
​ LaTeX ​ Go Pressure in Right Side Tube = Pressure Difference+Pressure in Left Side Tube
Pressure on Left of Manometer
​ LaTeX ​ Go Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference

Pressure on Left of Manometer Formula

​LaTeX ​Go
Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference
Pl = Pr-ΔP

How are the pressure difference created in nature?

Re-radiation of heat from land heats the air above it. The hot air rises and creates an area of low pressure. A high-pressure area forms above seawater as compared to air over land. Therefore, cooler air over the sea flows towards the land, where a low-pressure area exists.

How to Calculate Pressure on Left of Manometer?

Pressure on Left of Manometer calculator uses Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference to calculate the Pressure in Left Side Tube, The Pressure on Left of Manometer formula is defined as pressure on left-hand side of monometer. Pressure in Left Side Tube is denoted by Pl symbol.

How to calculate Pressure on Left of Manometer using this online calculator? To use this online calculator for Pressure on Left of Manometer, enter Pressure in Right Side Tube (Pr) & Pressure Difference (ΔP) and hit the calculate button. Here is how the Pressure on Left of Manometer calculation can be explained with given input values -> 2.2 = 23-20.5.

FAQ

What is Pressure on Left of Manometer?
The Pressure on Left of Manometer formula is defined as pressure on left-hand side of monometer and is represented as Pl = Pr-ΔP or Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference. Pressure in Right Side Tube is the pressure exerted at the right side of the tube & Pressure Difference is the difference in pressure intensities at two different points in a liquid.
How to calculate Pressure on Left of Manometer?
The Pressure on Left of Manometer formula is defined as pressure on left-hand side of monometer is calculated using Pressure in Left Side Tube = Pressure in Right Side Tube-Pressure Difference. To calculate Pressure on Left of Manometer, you need Pressure in Right Side Tube (Pr) & Pressure Difference (ΔP). With our tool, you need to enter the respective value for Pressure in Right Side Tube & Pressure Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!