Pressure intensity of water flowing through fixed ram in hydraulic intensifier Calculator

✖Pressure Intensity from supply to fixed cylinder is the force exerted per unit area by the hydraulic fluid flowing from the supply to the fixed cylinder.ⓘ Pressure Intensity from Supply to Fixed Cylinder [p]			+10% -10%
✖Area of sliding cylinder of intensifier is the surface area of the cylindrical component that facilitates fluid flow in hydraulic systems.ⓘ Area of Sliding Cylinder of Intensifier [A₁]			+10% -10%
✖Area of fixed ram of hydraulic intensifier is the surface area of the fixed ram in a hydraulic intensifier that transmits hydraulic pressure.ⓘ Area of Fixed Ram of Hydraulic Intensifier [A₂]			+10% -10%

✖Pressure Intensity in Sliding Cylinder is the force exerted per unit area on the sliding cylinder in a hydraulic system, affecting its performance and efficiency.ⓘ Pressure intensity of water flowing through fixed ram in hydraulic intensifier [p^sc]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Pressure intensity of water flowing through fixed ram in hydraulic intensifier Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier
p^sc = (p*A₁)/A₂
This formula uses 4 Variables

Variables Used

Pressure Intensity in Sliding Cylinder - (Measured in Pascal) - Pressure Intensity in Sliding Cylinder is the force exerted per unit area on the sliding cylinder in a hydraulic system, affecting its performance and efficiency.
Pressure Intensity from Supply to Fixed Cylinder - (Measured in Pascal) - Pressure Intensity from supply to fixed cylinder is the force exerted per unit area by the hydraulic fluid flowing from the supply to the fixed cylinder.
Area of Sliding Cylinder of Intensifier - (Measured in Square Meter) - Area of sliding cylinder of intensifier is the surface area of the cylindrical component that facilitates fluid flow in hydraulic systems.
Area of Fixed Ram of Hydraulic Intensifier - (Measured in Square Meter) - Area of fixed ram of hydraulic intensifier is the surface area of the fixed ram in a hydraulic intensifier that transmits hydraulic pressure.

STEP 1: Convert Input(s) to Base Unit

Pressure Intensity from Supply to Fixed Cylinder: 200000 Newton per Square Meter --> 200000 Pascal (Check conversion here)
Area of Sliding Cylinder of Intensifier: 0.47 Square Meter --> 0.47 Square Meter No Conversion Required
Area of Fixed Ram of Hydraulic Intensifier: 0.086 Square Meter --> 0.086 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p^sc = (p*A₁)/A₂ --> (200000*0.47)/0.086

Evaluating ... ...

p^sc = 1093023.25581395

STEP 3: Convert Result to Output's Unit

1093023.25581395 Pascal -->1093023.25581395 Newton per Square Meter (Check conversion here)

FINAL ANSWER

1093023.25581395 ≈ 1.1E+6 Newton per Square Meter <-- Pressure Intensity in Sliding Cylinder

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Fluid Mechanics » Fluid Machinery » Hydraulic Components » Mechanical » Hydraulic Intensifier » Pressure intensity of water flowing through fixed ram in hydraulic intensifier

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Hydraulic Intensifier Calculators

Diameter of fixed ram in hydraulic intensifier

LaTeX Go Diameter of Ram = sqrt((4*Pressure Intensity from Supply to Fixed Cylinder*Area of Fixed Cylinder of Intensifier)/(Pressure Intensity in Sliding Cylinder*pi))

Pressure intensity of water flowing through fixed ram in hydraulic intensifier

LaTeX Go Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier

Pressure intensity of water flowing through fixed ram in hydraulic intensifier Formula

LaTeX Go

Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier
p^sc = (p*A₁)/A₂

what is Hydraulic Intensifier ?

A hydraulic intensifier is a device used to increase the pressure of a hydraulic fluid in a system. It works by converting a low-pressure input into a high-pressure output, allowing for greater force or power in hydraulic applications. The intensifier typically consists of two pistons with different surface areas; the larger piston receives low-pressure fluid, which drives the smaller piston to produce a higher pressure output. Hydraulic intensifiers are commonly used in applications where high pressure is required but the available hydraulic system operates at lower pressure, such as in hydraulic presses, clamping devices, or cutting equipment.

How to Calculate Pressure intensity of water flowing through fixed ram in hydraulic intensifier?

Pressure intensity of water flowing through fixed ram in hydraulic intensifier calculator uses Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier to calculate the Pressure Intensity in Sliding Cylinder, Pressure intensity of water flowing through fixed ram in hydraulic intensifier formula is defined as the measure of force exerted by water flowing through a fixed ram in a hydraulic intensifier, which is a critical component in hydraulic systems, used to amplify pressure and generate high forces. Pressure Intensity in Sliding Cylinder is denoted by p^sc symbol.

How to calculate Pressure intensity of water flowing through fixed ram in hydraulic intensifier using this online calculator? To use this online calculator for Pressure intensity of water flowing through fixed ram in hydraulic intensifier, enter Pressure Intensity from Supply to Fixed Cylinder (p), Area of Sliding Cylinder of Intensifier (A₁) & Area of Fixed Ram of Hydraulic Intensifier (A₂) and hit the calculate button. Here is how the Pressure intensity of water flowing through fixed ram in hydraulic intensifier calculation can be explained with given input values -> 1.1E+6 = (200000*0.47)/0.086.

FAQ

What is Pressure intensity of water flowing through fixed ram in hydraulic intensifier?

Pressure intensity of water flowing through fixed ram in hydraulic intensifier formula is defined as the measure of force exerted by water flowing through a fixed ram in a hydraulic intensifier, which is a critical component in hydraulic systems, used to amplify pressure and generate high forces and is represented as p^sc = (p*A₁)/A₂ or Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier. Pressure Intensity from supply to fixed cylinder is the force exerted per unit area by the hydraulic fluid flowing from the supply to the fixed cylinder, Area of sliding cylinder of intensifier is the surface area of the cylindrical component that facilitates fluid flow in hydraulic systems & Area of fixed ram of hydraulic intensifier is the surface area of the fixed ram in a hydraulic intensifier that transmits hydraulic pressure.

How to calculate Pressure intensity of water flowing through fixed ram in hydraulic intensifier?

Pressure intensity of water flowing through fixed ram in hydraulic intensifier formula is defined as the measure of force exerted by water flowing through a fixed ram in a hydraulic intensifier, which is a critical component in hydraulic systems, used to amplify pressure and generate high forces is calculated using Pressure Intensity in Sliding Cylinder = (Pressure Intensity from Supply to Fixed Cylinder*Area of Sliding Cylinder of Intensifier)/Area of Fixed Ram of Hydraulic Intensifier. To calculate Pressure intensity of water flowing through fixed ram in hydraulic intensifier, you need Pressure Intensity from Supply to Fixed Cylinder (p), Area of Sliding Cylinder of Intensifier (A₁) & Area of Fixed Ram of Hydraulic Intensifier (A₂). With our tool, you need to enter the respective value for Pressure Intensity from Supply to Fixed Cylinder, Area of Sliding Cylinder of Intensifier & Area of Fixed Ram of Hydraulic Intensifier and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search