Pressure during Testing or Standard Specimen Calculator

✖Permeability Number is the rate of flow of air passing through a standard specimen under a standard pressure.ⓘ Permeability Number [PN]			+10% -10%
✖Time is various stages and durations throughout the casting process.ⓘ Time [t_p]			+10% -10%

✖Pressure in Casting is the force applied to the molten metal during the casting process, which can affect the flow, filling, and solidification of the material.ⓘ Pressure during Testing or Standard Specimen [p_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Permeability Number Formulas PDF PDF Image

Pressure during Testing or Standard Specimen Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure in Casting = 501.28/(Permeability Number*Time)
p_c = 501.28/(PN*t_p)
This formula uses 3 Variables

Variables Used

Pressure in Casting - (Measured in Pascal) - Pressure in Casting is the force applied to the molten metal during the casting process, which can affect the flow, filling, and solidification of the material.
Permeability Number - (Measured in Henry per Meter) - Permeability Number is the rate of flow of air passing through a standard specimen under a standard pressure.
Time - (Measured in Second) - Time is various stages and durations throughout the casting process.

STEP 1: Convert Input(s) to Base Unit

Permeability Number: 4.36 Henry per Meter --> 4.36 Henry per Meter No Conversion Required
Time: 3 Second --> 3 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p_c = 501.28/(PN*t_p) --> 501.28/(4.36*3)

Evaluating ... ...

p_c = 38.3241590214067

STEP 3: Convert Result to Output's Unit

38.3241590214067 Pascal -->3.90797663028755 Kilogram-Force per Square Meter (Check conversion here)

FINAL ANSWER

3.90797663028755 ≈ 3.907977 Kilogram-Force per Square Meter <-- Pressure in Casting

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Casting (Foundry) » Permeability Number » Pressure during Testing or Standard Specimen

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< Permeability Number Calculators

Cross-Sectional Area of Specimen

LaTeX Go Cross-Sectional Area of Specimen = (Volume of Air Flow Through Specimen*Specimen Height)/(Permeability Number*Air Pressure on Wall*Time)

Air Pressure during Testing

LaTeX Go Air Pressure on Wall = (Volume of Air Flow Through Specimen*Specimen Height)/(Permeability Number*Cross-Sectional Area of Specimen*Time)

Time Taken during Testing

LaTeX Go Time = (Volume of Air Flow Through Specimen*Specimen Height)/(Permeability Number*Air Pressure on Wall*Cross-Sectional Area of Specimen)

Permeability Number or Standard Specimen

LaTeX Go Permeability Number = 501.28/(Pressure in Casting*Time)

Pressure during Testing or Standard Specimen Formula

LaTeX Go

Pressure in Casting = 501.28/(Permeability Number*Time)
p_c = 501.28/(PN*t_p)

What is permeability number?

The Permeability Number the rate of flow of air passing through a standard specimen under a standard pressure.
The standard permeability test is to measure time taken by a 2000 cub cm of air at a pressure typically of 980 Pa (10 g/cm2), to pass through a standard sand specimen confined in a specimen tube. The standard specimen size is 50.8 mm in diameter and a length of 50.8 mm.

How to Calculate Pressure during Testing or Standard Specimen?

Pressure during Testing or Standard Specimen calculator uses Pressure in Casting = 501.28/(Permeability Number*Time) to calculate the Pressure in Casting, Pressure during Testing or Standard Specimen is the pressure exerted on a standard casting specimen during testing, as per the provided formula, is calculated as 501.28 divided by the product of the permeability number of the casting material and the time permeability of the casting material. Pressure in Casting is denoted by p_c symbol.

How to calculate Pressure during Testing or Standard Specimen using this online calculator? To use this online calculator for Pressure during Testing or Standard Specimen, enter Permeability Number (PN) & Time (t_p) and hit the calculate button. Here is how the Pressure during Testing or Standard Specimen calculation can be explained with given input values -> 0.398503 = 501.28/(4.36*3).

FAQ

What is Pressure during Testing or Standard Specimen?

Pressure during Testing or Standard Specimen is the pressure exerted on a standard casting specimen during testing, as per the provided formula, is calculated as 501.28 divided by the product of the permeability number of the casting material and the time permeability of the casting material and is represented as p_c = 501.28/(PN*t_p) or Pressure in Casting = 501.28/(Permeability Number*Time). Permeability Number is the rate of flow of air passing through a standard specimen under a standard pressure & Time is various stages and durations throughout the casting process.

How to calculate Pressure during Testing or Standard Specimen?

Pressure during Testing or Standard Specimen is the pressure exerted on a standard casting specimen during testing, as per the provided formula, is calculated as 501.28 divided by the product of the permeability number of the casting material and the time permeability of the casting material is calculated using Pressure in Casting = 501.28/(Permeability Number*Time). To calculate Pressure during Testing or Standard Specimen, you need Permeability Number (PN) & Time (t_p). With our tool, you need to enter the respective value for Permeability Number & Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search