Power Transmitted by Flat Belt for Design Purpose Calculator

✖Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.ⓘ Power Transmitted by Belt [P_t]			+10% -10%
✖Load Correction Factor increases the power factor of a load, improving efficiency for the distribution system to which it is attached.ⓘ Load Correction Factor [F_a]			+10% -10%

✖Design Power of Belt Drive is defined as the power transmitted on the basis of the design.ⓘ Power Transmitted by Flat Belt for Design Purpose [P_d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Power Transmitted by Flat Belt for Design Purpose Solution

STEP 0: Pre-Calculation Summary

Formula Used

Design Power of Belt Drive = Power Transmitted by Belt*Load Correction Factor
P_d = P_t*F_a
This formula uses 3 Variables

Variables Used

Design Power of Belt Drive - (Measured in Watt) - Design Power of Belt Drive is defined as the power transmitted on the basis of the design.
Power Transmitted by Belt - (Measured in Watt) - Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.
Load Correction Factor - Load Correction Factor increases the power factor of a load, improving efficiency for the distribution system to which it is attached.

STEP 1: Convert Input(s) to Base Unit

Power Transmitted by Belt: 6.45 Kilowatt --> 6450 Watt (Check conversion here)
Load Correction Factor: 1.15 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_d = P_t*F_a --> 6450*1.15

Evaluating ... ...

P_d = 7417.5

STEP 3: Convert Result to Output's Unit

7417.5 Watt -->7.4175 Kilowatt (Check conversion here)

FINAL ANSWER

7.4175 Kilowatt <-- Design Power of Belt Drive

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » Maximum Power Conditions » Power Transmitted by Flat Belt for Design Purpose

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Maximum Power Conditions Calculators

Optimum Velocity of Belt for Maximum Power Transmission

LaTeX Go Optimum Velocity of Belt = sqrt(Initial Tension in Belt/(3*Mass of Meter Length of Belt))

Initial Tension in Belt Drive

LaTeX Go Initial Tension in Belt = (Belt Tension on Tight Side+Belt Tension on Loose Side)/2

Belt Tension in Tight Side of Belt given Initial Tension in Belt

LaTeX Go Belt Tension on Tight Side = 2*Initial Tension in Belt-Belt Tension on Loose Side

Belt Tension in Loose Side of Belt given Initial Tension in Belt

LaTeX Go Belt Tension on Loose Side = 2*Initial Tension in Belt-Belt Tension on Tight Side

Power Transmitted by Flat Belt for Design Purpose Formula

LaTeX Go

Design Power of Belt Drive = Power Transmitted by Belt*Load Correction Factor
P_d = P_t*F_a

Define Flat Belts?

A flat belt is a belt with a flat surface, usually evenly textured on both sides, used in a pulley system. In conveyer belt construction, the flat belt can be used as a single broad belt on an assembly line or as part of an array of webbed belts.

How to Calculate Power Transmitted by Flat Belt for Design Purpose?

Power Transmitted by Flat Belt for Design Purpose calculator uses Design Power of Belt Drive = Power Transmitted by Belt*Load Correction Factor to calculate the Design Power of Belt Drive, Power Transmitted by Flat Belt for Design Purpose formula is defined as a means to evaluate the effective power transfer capability of a flat belt in mechanical systems, ensuring optimal performance and efficiency in belt drive designs. Design Power of Belt Drive is denoted by P_d symbol.

How to calculate Power Transmitted by Flat Belt for Design Purpose using this online calculator? To use this online calculator for Power Transmitted by Flat Belt for Design Purpose, enter Power Transmitted by Belt (P_t) & Load Correction Factor (F_a) and hit the calculate button. Here is how the Power Transmitted by Flat Belt for Design Purpose calculation can be explained with given input values -> 0.007417 = 6450*1.15.

FAQ

What is Power Transmitted by Flat Belt for Design Purpose?

Power Transmitted by Flat Belt for Design Purpose formula is defined as a means to evaluate the effective power transfer capability of a flat belt in mechanical systems, ensuring optimal performance and efficiency in belt drive designs and is represented as P_d = P_t*F_a or Design Power of Belt Drive = Power Transmitted by Belt*Load Correction Factor. Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley & Load Correction Factor increases the power factor of a load, improving efficiency for the distribution system to which it is attached.

How to calculate Power Transmitted by Flat Belt for Design Purpose?

Power Transmitted by Flat Belt for Design Purpose formula is defined as a means to evaluate the effective power transfer capability of a flat belt in mechanical systems, ensuring optimal performance and efficiency in belt drive designs is calculated using Design Power of Belt Drive = Power Transmitted by Belt*Load Correction Factor. To calculate Power Transmitted by Flat Belt for Design Purpose, you need Power Transmitted by Belt (P_t) & Load Correction Factor (F_a). With our tool, you need to enter the respective value for Power Transmitted by Belt & Load Correction Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search