Power in DC Circuit Solution

STEP 0: Pre-Calculation Summary
Formula Used
Power = Voltage*Current
P = V*I
This formula uses 3 Variables
Variables Used
Power - (Measured in Watt) - Power can be defined as the rate of energy consumed in a unit time. Electrical power is the rate of flow of electrical energy past a given point in a closed circuit.
Voltage - (Measured in Volt) - Voltage, electric potential difference is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points.
Current - (Measured in Ampere) - Current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space.
STEP 1: Convert Input(s) to Base Unit
Voltage: 22.5 Volt --> 22.5 Volt No Conversion Required
Current: 0.75 Ampere --> 0.75 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = V*I --> 22.5*0.75
Evaluating ... ...
P = 16.875
STEP 3: Convert Result to Output's Unit
16.875 Watt --> No Conversion Required
FINAL ANSWER
16.875 Watt <-- Power
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Aman Dhussawat
GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI
Aman Dhussawat has verified this Calculator and 100+ more calculators!

DC Circuits Calculators

Delta to Star Transformation
​ LaTeX ​ Go Star Impedance A = (Delta Impedance 1*Delta Impedance 3)/(Delta Impedance 1+Delta Impedance 2+Delta Impedance 3)
Star to Delta Transformation
​ LaTeX ​ Go Delta Impedance 1 = Star Impedance A+Star Impedance B+((Star Impedance A*Star Impedance B)/Star Impedance C)
Maximum Power Transfer
​ LaTeX ​ Go Maximum Power = (Thevenin Voltage^2*Load Resistance)/(Load Resistance+Thevenin Resistance)^2
Voltage in DC Circuit
​ LaTeX ​ Go Voltage = Current*Resistance

Power in DC Circuit Formula

​LaTeX ​Go
Power = Voltage*Current
P = V*I

Define DC?

DC is defined as the "unidirectional" flow of current; current only flows in one direction. Voltage and current can vary over time so long as the direction of flow does not change. To simplify things, we will assume that voltage is a constant. For example, we assume that a AA battery provides 1.5V.

How to Calculate Power in DC Circuit?

Power in DC Circuit calculator uses Power = Voltage*Current to calculate the Power, The Power in DC Circuit formula is defined as the rate of energy consumed in a unit time. Electrical power is the rate of flow of electrical energy past a given point in a closed circuit. Power is denoted by P symbol.

How to calculate Power in DC Circuit using this online calculator? To use this online calculator for Power in DC Circuit, enter Voltage (V) & Current (I) and hit the calculate button. Here is how the Power in DC Circuit calculation can be explained with given input values -> 16.875 = 22.5*0.75.

FAQ

What is Power in DC Circuit?
The Power in DC Circuit formula is defined as the rate of energy consumed in a unit time. Electrical power is the rate of flow of electrical energy past a given point in a closed circuit and is represented as P = V*I or Power = Voltage*Current. Voltage, electric potential difference is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points & Current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space.
How to calculate Power in DC Circuit?
The Power in DC Circuit formula is defined as the rate of energy consumed in a unit time. Electrical power is the rate of flow of electrical energy past a given point in a closed circuit is calculated using Power = Voltage*Current. To calculate Power in DC Circuit, you need Voltage (V) & Current (I). With our tool, you need to enter the respective value for Voltage & Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!