Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) Calculator

✖Constant Underground AC is defined as the constant of line of a Overhead supply system.ⓘ Constant Underground AC [K]			+10% -10%
✖Volume Of Conductor the 3-dimensional space enclosed by a conductor material.ⓘ Volume Of Conductor [V]			+10% -10%

✖The power factor of an AC electrical power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit.ⓘ Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) [PF]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor)
PF = sqrt((2.194)*K/V)
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Power Factor - The power factor of an AC electrical power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit.
Constant Underground AC - Constant Underground AC is defined as the constant of line of a Overhead supply system.
Volume Of Conductor - (Measured in Cubic Meter) - Volume Of Conductor the 3-dimensional space enclosed by a conductor material.

STEP 1: Convert Input(s) to Base Unit

Constant Underground AC: 0.87 --> No Conversion Required
Volume Of Conductor: 60 Cubic Meter --> 60 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

PF = sqrt((2.194)*K/V) --> sqrt((2.194)*0.87/60)

Evaluating ... ...

PF = 0.178361991466792

STEP 3: Convert Result to Output's Unit

0.178361991466792 --> No Conversion Required

FINAL ANSWER

0.178361991466792 ≈ 0.178362 <-- Power Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground AC Supply » 2 Φ 3 Wire System » Power and Power Factor » Power Factor using Volume of Conductor Material (2 Phase 3 Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Power and Power Factor Calculators

Transmitted Power using Line Losses (2-Phase 3-Wire US)

LaTeX Go Power Transmitted = sqrt(Line Losses*Area of Underground AC Wire*(Maximum Voltage Underground AC*cos(Phase Difference))^2/((2+sqrt(2))*Resistivity*Length of Underground AC Wire))

Power Transmitted using Volume of Conductor Material (2 Phase 3 Wire US)

LaTeX Go Power Transmitted = sqrt(Line Losses*Volume Of Conductor*(Maximum Voltage Underground AC*cos(Phase Difference))^2/(Resistivity*(((2+sqrt(2))*Length of Underground AC Wire)^2)))

Power Factor using Line Losses (2-Phase 3-Wire US)

LaTeX Go Power Factor = (Power Transmitted/Maximum Voltage Underground AC)*sqrt((2+sqrt(2))*Resistivity*Length of Underground AC Wire/Line Losses*Area of Underground AC Wire)

Power Factor using Volume of Conductor Material (2 Phase 3 Wire US)

LaTeX Go Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor)

Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) Formula

LaTeX Go

Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor)
PF = sqrt((2.194)*K/V)

What is the value of maximum voltage and volume of conductor material in 2-phase 3-wire system?

The volume of conductor material required in this system is 2.914/cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is v_m/√2 so that r.m.s. value of voltage between them is v_m/2.

How to Calculate Power Factor using Volume of Conductor Material (2 Phase 3 Wire US)?

Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) calculator uses Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor) to calculate the Power Factor, The Power Factor using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the cosine of the angle between the voltage phasor and current phasor in an AC circuit. Power Factor is denoted by PF symbol.

How to calculate Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) using this online calculator? To use this online calculator for Power Factor using Volume of Conductor Material (2 Phase 3 Wire US), enter Constant Underground AC (K) & Volume Of Conductor (V) and hit the calculate button. Here is how the Power Factor using Volume of Conductor Material (2 Phase 3 Wire US) calculation can be explained with given input values -> 0.178362 = sqrt((2.194)*0.87/60).

FAQ

What is Power Factor using Volume of Conductor Material (2 Phase 3 Wire US)?

The Power Factor using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the cosine of the angle between the voltage phasor and current phasor in an AC circuit and is represented as PF = sqrt((2.194)*K/V) or Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor). Constant Underground AC is defined as the constant of line of a Overhead supply system & Volume Of Conductor the 3-dimensional space enclosed by a conductor material.

How to calculate Power Factor using Volume of Conductor Material (2 Phase 3 Wire US)?

The Power Factor using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the cosine of the angle between the voltage phasor and current phasor in an AC circuit is calculated using Power Factor = sqrt((2.194)*Constant Underground AC/Volume Of Conductor). To calculate Power Factor using Volume of Conductor Material (2 Phase 3 Wire US), you need Constant Underground AC (K) & Volume Of Conductor (V). With our tool, you need to enter the respective value for Constant Underground AC & Volume Of Conductor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Power Factor?

In this formula, Power Factor uses Constant Underground AC & Volume Of Conductor. We can use 3 other way(s) to calculate the same, which is/are as follows -

Power Factor = (Power Transmitted/Maximum Voltage Underground AC)*sqrt((2+sqrt(2))*Resistivity*Length of Underground AC Wire/Line Losses*Area of Underground AC Wire)
Power Factor = Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC)
Power Factor = sqrt(2)*Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC)

Home

FREE PDFs

🔍 Search