Pouring Temperature from Fluidity Spiral Length Calculator

✖Spiral Length of Fluidity is measured for the fluidity which is represented by the length of the spiral solidified.ⓘ Spiral Length of Fluidity [F.S.L]			+10% -10%
✖Composition Factor of fluidity can be defined as the factor affecting fluidity and composition of metal.ⓘ Composition Factor of Fluidity [C.F]			+10% -10%

✖Pouring Temperature is the temperature at which the molten metal is poured into the casting mold, impacting the solidification rate.ⓘ Pouring Temperature from Fluidity Spiral Length [T_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Casting (Foundry) Formula PDF PDF Image

Pouring Temperature from Fluidity Spiral Length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228
T_p = (389.6+F.S.L-37.846*C.F)/0.228
This formula uses 3 Variables

Variables Used

Pouring Temperature - (Measured in Kelvin) - Pouring Temperature is the temperature at which the molten metal is poured into the casting mold, impacting the solidification rate.
Spiral Length of Fluidity - (Measured in Meter) - Spiral Length of Fluidity is measured for the fluidity which is represented by the length of the spiral solidified.
Composition Factor of Fluidity - Composition Factor of fluidity can be defined as the factor affecting fluidity and composition of metal.

STEP 1: Convert Input(s) to Base Unit

Spiral Length of Fluidity: 0.67 Meter --> 0.67 Meter No Conversion Required
Composition Factor of Fluidity: 7.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_p = (389.6+F.S.L-37.846*C.F)/0.228 --> (389.6+0.67-37.846*7.5)/0.228

Evaluating ... ...

T_p = 466.776315789474

STEP 3: Convert Result to Output's Unit

466.776315789474 Kelvin -->193.626315789474 Celsius (Check conversion here)

FINAL ANSWER

193.626315789474 ≈ 193.6263 Celsius <-- Pouring Temperature

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Casting (Foundry) » Fluidity Test » Pouring Temperature from Fluidity Spiral Length

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< Fluidity Test Calculators

Composition factor for gray cast iron

LaTeX Go Composition Factor = Carbon Percentage+(0.25*Silicon Percentage)+(0.5*Phosphorus Percentage)

Fluidity spiral length

LaTeX Go Fluidity Spiral Length (Solidified) = 37.846*Composition Factor+(0.228*Pouring Temperature (Degree Celsius))-389.6

Composition Factor from Fluidity Spiral Length

LaTeX Go Composition Factor From Fluid = (389.6+Fluidity Spiral Length-0.228*Pouring Temperature of Molten Metal)/37.846

Pouring Temperature from Fluidity Spiral Length

LaTeX Go Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228

Pouring Temperature from Fluidity Spiral Length Formula

LaTeX Go

Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228
T_p = (389.6+F.S.L-37.846*C.F)/0.228

What is Spiral Fluidity test?

Since fluidity depends on such a large number of diverse variables, it is not feasible theoretically to determine it and therefore, practical testing is resorted to. The most commonly used testing is the spiral fluidity test. The mould of the same composition that is to be used is prepared with the standard spiral pattern with gating. The casting prepared from the mould is measured for the fluidity which is represented by the length of the spiral solidified.
Gray cast iron is the most fluid of all the ferrous alloys. The fluidity of gray cast iron is affected by the composition factor (CF). Since the fluidity is affected by the pouring temperature and to affect the completion of the mould filling in a reasonable time, the pouring temperatures of the molds are accordingly controlled.

How to Calculate Pouring Temperature from Fluidity Spiral Length?

Pouring Temperature from Fluidity Spiral Length calculator uses Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228 to calculate the Pouring Temperature, The pouring temperature from fluidity spiral length is used to determine the optimal pouring temperature for molten metal, often used in the casting of metals like cast iron. Pouring Temperature is denoted by T_p symbol.

How to calculate Pouring Temperature from Fluidity Spiral Length using this online calculator? To use this online calculator for Pouring Temperature from Fluidity Spiral Length, enter Spiral Length of Fluidity (F.S.L) & Composition Factor of Fluidity (C.F) and hit the calculate button. Here is how the Pouring Temperature from Fluidity Spiral Length calculation can be explained with given input values -> -82.431579 = (389.6+0.67-37.846*7.5)/0.228.

FAQ

What is Pouring Temperature from Fluidity Spiral Length?

The pouring temperature from fluidity spiral length is used to determine the optimal pouring temperature for molten metal, often used in the casting of metals like cast iron and is represented as T_p = (389.6+F.S.L-37.846*C.F)/0.228 or Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228. Spiral Length of Fluidity is measured for the fluidity which is represented by the length of the spiral solidified & Composition Factor of fluidity can be defined as the factor affecting fluidity and composition of metal.

How to calculate Pouring Temperature from Fluidity Spiral Length?

The pouring temperature from fluidity spiral length is used to determine the optimal pouring temperature for molten metal, often used in the casting of metals like cast iron is calculated using Pouring Temperature = (389.6+Spiral Length of Fluidity-37.846*Composition Factor of Fluidity)/0.228. To calculate Pouring Temperature from Fluidity Spiral Length, you need Spiral Length of Fluidity (F.S.L) & Composition Factor of Fluidity (C.F). With our tool, you need to enter the respective value for Spiral Length of Fluidity & Composition Factor of Fluidity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search