Possible Recharge given other Recharge Factors Calculator

✖The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.ⓘ Recharge from Rainfall [R_rf]			+10% -10%
✖The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.ⓘ Recharge from Irrigation [R_gw]			+10% -10%
✖The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.ⓘ Recharge from Conservation Structures [R_wt]			+10% -10%
✖The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.ⓘ Recharge from Tanks and Ponds [R_t]			+10% -10%

✖The Possible Recharge refers to the gross recharge minus the natural recharge of the area.ⓘ Possible Recharge given other Recharge Factors [R]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Groundwater Level Fluctuation Formulas PDF PDF Image

Possible Recharge given other Recharge Factors Solution

STEP 0: Pre-Calculation Summary

Formula Used

Possible Recharge = Recharge from Rainfall+Recharge from Irrigation+Recharge from Conservation Structures+Recharge from Tanks and Ponds
R = R_rf+R_gw+R_wt+R_t
This formula uses 5 Variables

Variables Used

Possible Recharge - (Measured in Cubic Meter per Second) - The Possible Recharge refers to the gross recharge minus the natural recharge of the area.
Recharge from Rainfall - (Measured in Cubic Meter per Second) - The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.
Recharge from Irrigation - (Measured in Cubic Meter per Second) - The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.
Recharge from Conservation Structures - (Measured in Cubic Meter per Second) - The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.
Recharge from Tanks and Ponds - (Measured in Cubic Meter per Second) - The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.

STEP 1: Convert Input(s) to Base Unit

Recharge from Rainfall: 16 Cubic Meter per Second --> 16 Cubic Meter per Second No Conversion Required
Recharge from Irrigation: 19 Cubic Meter per Second --> 19 Cubic Meter per Second No Conversion Required
Recharge from Conservation Structures: 21 Cubic Meter per Second --> 21 Cubic Meter per Second No Conversion Required
Recharge from Tanks and Ponds: 14 Cubic Meter per Second --> 14 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R = R_rf+R_gw+R_wt+R_t --> 16+19+21+14

Evaluating ... ...

R = 70

STEP 3: Convert Result to Output's Unit

70 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

70 Cubic Meter per Second <-- Possible Recharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Groundwater Level Fluctuation » Possible Recharge given other Recharge Factors

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Groundwater Level Fluctuation Calculators

Equation for Specific Yield

LaTeX Go Specific Yield = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Water Level Fluctuation)

Equation for Gross Recharge due to Rainfall and other Sources

LaTeX Go Gross Recharge due to Rainfall = (Water Level Fluctuation*Specific Yield*Watershed Area)+Gross Water Draft+Base Flow into the Stream from the Area-Recharge of Ground Water Body-Net Ground Water Flowing Outside Catchment

Equation for Base Flow into Stream from Area

LaTeX Go Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Gross Water Draft

LaTeX Go Gross Water Draft = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Possible Recharge given other Recharge Factors Formula

LaTeX Go

Possible Recharge = Recharge from Rainfall+Recharge from Irrigation+Recharge from Conservation Structures+Recharge from Tanks and Ponds
R = R_rf+R_gw+R_wt+R_t

What is Groundwater Flow?

Groundwater Flow is defined as the part of streamflow that has infiltrated the ground, entered the phreatic zone, and has been discharged into a stream channel or springs, and seepage water. It is governed by the groundwater flow equation.

How to Calculate Possible Recharge given other Recharge Factors?

Possible Recharge given other Recharge Factors calculator uses Possible Recharge = Recharge from Rainfall+Recharge from Irrigation+Recharge from Conservation Structures+Recharge from Tanks and Ponds to calculate the Possible Recharge, The Possible Recharge given other Recharge Factors formula is defined as the hydrologic process, where water moves downward from every possible source like rainfall, irrigation, ponds, lakes, uncultivated strips, shelterbelts, terraces to groundwater. Possible Recharge is denoted by R symbol.

How to calculate Possible Recharge given other Recharge Factors using this online calculator? To use this online calculator for Possible Recharge given other Recharge Factors, enter Recharge from Rainfall (R_rf), Recharge from Irrigation (R_gw), Recharge from Conservation Structures (R_wt) & Recharge from Tanks and Ponds (R_t) and hit the calculate button. Here is how the Possible Recharge given other Recharge Factors calculation can be explained with given input values -> 70 = 16+19+21+14.

FAQ

What is Possible Recharge given other Recharge Factors?

The Possible Recharge given other Recharge Factors formula is defined as the hydrologic process, where water moves downward from every possible source like rainfall, irrigation, ponds, lakes, uncultivated strips, shelterbelts, terraces to groundwater and is represented as R = R_rf+R_gw+R_wt+R_t or Possible Recharge = Recharge from Rainfall+Recharge from Irrigation+Recharge from Conservation Structures+Recharge from Tanks and Ponds. The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply, The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices, The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means & The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.

How to calculate Possible Recharge given other Recharge Factors?

The Possible Recharge given other Recharge Factors formula is defined as the hydrologic process, where water moves downward from every possible source like rainfall, irrigation, ponds, lakes, uncultivated strips, shelterbelts, terraces to groundwater is calculated using Possible Recharge = Recharge from Rainfall+Recharge from Irrigation+Recharge from Conservation Structures+Recharge from Tanks and Ponds. To calculate Possible Recharge given other Recharge Factors, you need Recharge from Rainfall (R_rf), Recharge from Irrigation (R_gw), Recharge from Conservation Structures (R_wt) & Recharge from Tanks and Ponds (R_t). With our tool, you need to enter the respective value for Recharge from Rainfall, Recharge from Irrigation, Recharge from Conservation Structures & Recharge from Tanks and Ponds and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Possible Recharge?

In this formula, Possible Recharge uses Recharge from Rainfall, Recharge from Irrigation, Recharge from Conservation Structures & Recharge from Tanks and Ponds. We can use 2 other way(s) to calculate the same, which is/are as follows -

Possible Recharge = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body
Possible Recharge = (Water Level Fluctuation*Specific Yield*Watershed Area)-Gross Water Draft

Home

FREE PDFs

🔍 Search