Pivot Centre given Turning Radius of Inner Front Wheel Calculator

✖Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).ⓘ Track Width of Vehicle [a_tw]			+10% -10%
✖Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.ⓘ Wheelbase of Vehicle [b]			+10% -10%
✖Angle of Inside Wheel Lock is the angle through which inner wheel of vehicle steers while cornering.ⓘ Angle of Inside Wheel Lock [θ]			+10% -10%
✖Turning Radius of Inner Front Wheel is the radius of the circle traced by the inner front wheel while cornering.ⓘ Turning Radius of Inner Front Wheel [R_if]			+10% -10%

✖Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.ⓘ Pivot Centre given Turning Radius of Inner Front Wheel [c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Turning Dynamics Formulas PDF PDF Image

Pivot Centre given Turning Radius of Inner Front Wheel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel)
c = a_tw-2*(b/sin(θ)-R_if)
This formula uses 1 Functions, 5 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Distance between Front Wheel Pivot Center - (Measured in Meter) - Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.
Track Width of Vehicle - (Measured in Meter) - Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).
Wheelbase of Vehicle - (Measured in Meter) - Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.
Angle of Inside Wheel Lock - (Measured in Radian) - Angle of Inside Wheel Lock is the angle through which inner wheel of vehicle steers while cornering.
Turning Radius of Inner Front Wheel - (Measured in Meter) - Turning Radius of Inner Front Wheel is the radius of the circle traced by the inner front wheel while cornering.

STEP 1: Convert Input(s) to Base Unit

Track Width of Vehicle: 1999 Millimeter --> 1.999 Meter (Check conversion here)
Wheelbase of Vehicle: 2700 Millimeter --> 2.7 Meter (Check conversion here)
Angle of Inside Wheel Lock: 40 Degree --> 0.698131700797601 Radian (Check conversion here)
Turning Radius of Inner Front Wheel: 3851 Millimeter --> 3.851 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

c = a_tw-2*(b/sin(θ)-R_if) --> 1.999-2*(2.7/sin(0.698131700797601)-3.851)

Evaluating ... ...

c = 1.30009133495246

STEP 3: Convert Result to Output's Unit

1.30009133495246 Meter -->1300.09133495246 Millimeter (Check conversion here)

FINAL ANSWER

1300.09133495246 ≈ 1300.091 Millimeter <-- Distance between Front Wheel Pivot Center

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Automobile » Front Axle and Steering » Mechanical » Turning Dynamics » Pivot Centre given Turning Radius of Inner Front Wheel

Credits

Created by Vivek Gaikwad

AISSMS College of Engineering, Pune (AISSMSCOE, Pune), Pune

Vivek Gaikwad has created this Calculator and 25+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Turning Dynamics Calculators

Pivot Centre given Turning Radius of Outer Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/sin(Angle of Outside Wheel Lock)+Turning Radius of Outer Front Wheel)

Pivot Centre given Turning Radius of Outer Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock)+Turning Radius of Outer Rear Wheel)

Pivot Centre given Turning Radius of Inner Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel)

Pivot Centre given Turning Radius of Inner Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/tan(Angle of Inside Wheel Lock)-Turning Radius of Inner Rear Wheel)

Pivot Centre given Turning Radius of Inner Front Wheel Formula

LaTeX Go

Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel)
c = a_tw-2*(b/sin(θ)-R_if)

What is distance between Pivot center?

Distance between front wheel pivot center is the distance between those points about which both front wheels pivot while cornering.

How to Calculate Pivot Centre given Turning Radius of Inner Front Wheel?

Pivot Centre given Turning Radius of Inner Front Wheel calculator uses Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel) to calculate the Distance between Front Wheel Pivot Center, Pivot Centre given Turning radius of inner front wheel is the distance between those points about which both front wheels pivot while cornering. Distance between Front Wheel Pivot Center is denoted by c symbol.

How to calculate Pivot Centre given Turning Radius of Inner Front Wheel using this online calculator? To use this online calculator for Pivot Centre given Turning Radius of Inner Front Wheel, enter Track Width of Vehicle (a_tw), Wheelbase of Vehicle (b), Angle of Inside Wheel Lock (θ) & Turning Radius of Inner Front Wheel (R_if) and hit the calculate button. Here is how the Pivot Centre given Turning Radius of Inner Front Wheel calculation can be explained with given input values -> 1.5E+6 = 1.999-2*(2.7/sin(0.698131700797601)-3.851).

FAQ

What is Pivot Centre given Turning Radius of Inner Front Wheel?

Pivot Centre given Turning radius of inner front wheel is the distance between those points about which both front wheels pivot while cornering and is represented as c = a_tw-2*(b/sin(θ)-R_if) or Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel). Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle), Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle, Angle of Inside Wheel Lock is the angle through which inner wheel of vehicle steers while cornering & Turning Radius of Inner Front Wheel is the radius of the circle traced by the inner front wheel while cornering.

How to calculate Pivot Centre given Turning Radius of Inner Front Wheel?

Pivot Centre given Turning radius of inner front wheel is the distance between those points about which both front wheels pivot while cornering is calculated using Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel). To calculate Pivot Centre given Turning Radius of Inner Front Wheel, you need Track Width of Vehicle (a_tw), Wheelbase of Vehicle (b), Angle of Inside Wheel Lock (θ) & Turning Radius of Inner Front Wheel (R_if). With our tool, you need to enter the respective value for Track Width of Vehicle, Wheelbase of Vehicle, Angle of Inside Wheel Lock & Turning Radius of Inner Front Wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Distance between Front Wheel Pivot Center?

In this formula, Distance between Front Wheel Pivot Center uses Track Width of Vehicle, Wheelbase of Vehicle, Angle of Inside Wheel Lock & Turning Radius of Inner Front Wheel. We can use 3 other way(s) to calculate the same, which is/are as follows -

Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/tan(Angle of Inside Wheel Lock)-Turning Radius of Inner Rear Wheel)
Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/sin(Angle of Outside Wheel Lock)+Turning Radius of Outer Front Wheel)
Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock)+Turning Radius of Outer Rear Wheel)

Home

FREE PDFs

🔍 Search