Phase Shift of Jth Channel Solution

STEP 0: Pre-Calculation Summary
Formula Used
Phase Shift Jth Channel = Non Linear Parameter*Effective Interaction Length*(Power of Jth signal+2*sum(x,1,Range of Other Channels Except J,Power of Mth signal))
ØjNL = γ*Leff*(Pj+2*sum(x,1,m,Pm))
This formula uses 1 Functions, 6 Variables
Functions Used
sum - Summation or sigma (∑) notation is a method used to write out a long sum in a concise way., sum(i, from, to, expr)
Variables Used
Phase Shift Jth Channel - (Measured in Radian) - Phase Shift Jth Channel refers to the change in the phase of the optical signal in the "jth channel" induced by the presence of another optical signal.
Non Linear Parameter - (Measured in Decibel per Meter) - Non Linear Parameter refers to the attenuation coefficient or attenuation rate of optical fibers.
Effective Interaction Length - (Measured in Meter) - Effective Interaction Length used to describe the distance over which light can interact with or propagate through the fiber before certain optical effects become significant.
Power of Jth signal - (Measured in Watt) - Power of Jth signal denotes the power of the "j-th" signal, which could be any optical signal in the system.
Range of Other Channels Except J - Range of Other Channels Except J is the specific range for m is determined by the number of optical channels being considered in the analysis of XPM.
Power of Mth signal - (Measured in Watt) - Power of Mth signal denotes the power of the "m-th" signal, which is another optical signal propagating concurrently with the Pj signal.
STEP 1: Convert Input(s) to Base Unit
Non Linear Parameter: 5 Decibel per Meter --> 5 Decibel per Meter No Conversion Required
Effective Interaction Length: 0.3485 Meter --> 0.3485 Meter No Conversion Required
Power of Jth signal: 40 Watt --> 40 Watt No Conversion Required
Range of Other Channels Except J: 5 --> No Conversion Required
Power of Mth signal: 27 Watt --> 27 Watt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ØjNL = γ*Leff*(Pj+2*sum(x,1,m,Pm)) --> 5*0.3485*(40+2*sum(x,1,5,27))
Evaluating ... ...
ØjNL = 540.175
STEP 3: Convert Result to Output's Unit
540.175 Radian --> No Conversion Required
FINAL ANSWER
540.175 Radian <-- Phase Shift Jth Channel
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Zaheer Sheik
Seshadri Rao Gudlavalleru Engineering College (SRGEC), Gudlavalleru
Zaheer Sheik has created this Calculator and 25+ more calculators!
Verifier Image
Verified by banuprakash
Dayananda Sagar College of Engineering (DSCE), Bangalore
banuprakash has verified this Calculator and 25+ more calculators!

Fiber Modelling Parameters Calculators

Diameter of Fiber
​ LaTeX ​ Go Diameter of Fiber = (Wavelength of Light*Number of Modes)/(pi*Numerical Aperture)
Power Loss in Fiber
​ LaTeX ​ Go Power Loss Fiber = Input Power*exp(Attenuation Coefficient*Length of Fiber)
Fiber Attenuation Coefficient
​ LaTeX ​ Go Attenuation Coefficient = Attenuation Loss/4.343
Number of Modes using Normalized Frequency
​ LaTeX ​ Go Number of Modes = Normalized Frequency^2/2

Phase Shift of Jth Channel Formula

​LaTeX ​Go
Phase Shift Jth Channel = Non Linear Parameter*Effective Interaction Length*(Power of Jth signal+2*sum(x,1,Range of Other Channels Except J,Power of Mth signal))
ØjNL = γ*Leff*(Pj+2*sum(x,1,m,Pm))

What is Cross-Phase Modulation?

Cross-phase modulation (XPM) is a nonlinear optical phenomenon occurring in fiber optic communication systems. It results from the interaction between different optical signals (channels) propagating through the same fiber, the intensity of one optical signal (the pump or modulating signal) induces changes in the refractive index of the fiber, which modulates the phase of another optical signal (the probe or modulated signal). This modulation can lead to various effects, including phase shifts, frequency shifts, signal distortion, and the generation of new optical frequencies through nonlinear mixing processes.

How to Calculate Phase Shift of Jth Channel?

Phase Shift of Jth Channel calculator uses Phase Shift Jth Channel = Non Linear Parameter*Effective Interaction Length*(Power of Jth signal+2*sum(x,1,Range of Other Channels Except J,Power of Mth signal)) to calculate the Phase Shift Jth Channel, The Phase Shift of Jth Channel occurs when two or more optical channels are transmitted simultaneously inside an optical fiber using the WDM technique. In such systems, the nonlinear phase shift for a specific channel depends not only on the power of that channel but also on the power of other channels. Phase Shift Jth Channel is denoted by ØjNL symbol.

How to calculate Phase Shift of Jth Channel using this online calculator? To use this online calculator for Phase Shift of Jth Channel, enter Non Linear Parameter (γ), Effective Interaction Length (Leff), Power of Jth signal (Pj), Range of Other Channels Except J (m) & Power of Mth signal (Pm) and hit the calculate button. Here is how the Phase Shift of Jth Channel calculation can be explained with given input values -> 540.175 = 5*0.3485*(40+2*sum(x,1,5,27)).

FAQ

What is Phase Shift of Jth Channel?
The Phase Shift of Jth Channel occurs when two or more optical channels are transmitted simultaneously inside an optical fiber using the WDM technique. In such systems, the nonlinear phase shift for a specific channel depends not only on the power of that channel but also on the power of other channels and is represented as ØjNL = γ*Leff*(Pj+2*sum(x,1,m,Pm)) or Phase Shift Jth Channel = Non Linear Parameter*Effective Interaction Length*(Power of Jth signal+2*sum(x,1,Range of Other Channels Except J,Power of Mth signal)). Non Linear Parameter refers to the attenuation coefficient or attenuation rate of optical fibers, Effective Interaction Length used to describe the distance over which light can interact with or propagate through the fiber before certain optical effects become significant, Power of Jth signal denotes the power of the "j-th" signal, which could be any optical signal in the system, Range of Other Channels Except J is the specific range for m is determined by the number of optical channels being considered in the analysis of XPM & Power of Mth signal denotes the power of the "m-th" signal, which is another optical signal propagating concurrently with the Pj signal.
How to calculate Phase Shift of Jth Channel?
The Phase Shift of Jth Channel occurs when two or more optical channels are transmitted simultaneously inside an optical fiber using the WDM technique. In such systems, the nonlinear phase shift for a specific channel depends not only on the power of that channel but also on the power of other channels is calculated using Phase Shift Jth Channel = Non Linear Parameter*Effective Interaction Length*(Power of Jth signal+2*sum(x,1,Range of Other Channels Except J,Power of Mth signal)). To calculate Phase Shift of Jth Channel, you need Non Linear Parameter (γ), Effective Interaction Length (Leff), Power of Jth signal (Pj), Range of Other Channels Except J (m) & Power of Mth signal (Pm). With our tool, you need to enter the respective value for Non Linear Parameter, Effective Interaction Length, Power of Jth signal, Range of Other Channels Except J & Power of Mth signal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!