Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint Calculator

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Welded Plates [P]			+10% -10%
✖Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.ⓘ Welded Base Plate Thickness [t_p]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.ⓘ Efficiency of Welded Joints [η]			+10% -10%

✖Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.ⓘ Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Butt Welds Formulas PDF PDF Image

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)
σ_t = P/(t_p*L*η)
This formula uses 5 Variables

Variables Used

Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Welded Base Plate Thickness - (Measured in Meter) - Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Efficiency of Welded Joints - The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

STEP 1: Convert Input(s) to Base Unit

Tensile Force on Welded Plates: 16.5 Kilonewton --> 16500 Newton (Check conversion here)
Welded Base Plate Thickness: 18 Millimeter --> 0.018 Meter (Check conversion here)
Length of Weld: 19.5 Millimeter --> 0.0195 Meter (Check conversion here)
Efficiency of Welded Joints: 0.833 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P/(t_p*L*η) --> 16500/(0.018*0.0195*0.833)

Evaluating ... ...

σ_t = 56432829.5420732

STEP 3: Convert Result to Output's Unit

56432829.5420732 Pascal -->56.4328295420733 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

56.4328295420733 ≈ 56.43283 Newton per Square Millimeter <-- Tensile Stress in Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Butt Welds » Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Butt Welds Calculators

Strength of Butt Welded Joint

LaTeX Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Beam Width for Nominal Shear*Length of Weld)

Throat of Butt Weld given Average Tensile Stress

LaTeX Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)

Average Tensile Stress in Butt Weld

LaTeX Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)

Tensile Force on Plates given Average Tensile Stress in Butt Weld

LaTeX Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint Formula

LaTeX Go

Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)
σ_t = P/(t_p*L*η)

Residual Stress in Welding

Welding residual stresses are caused by differential thermal expansion and contraction of the weld metal and parent material. Residual stress levels in and near to the weld can be very high, up to material yield strength magnitude in highly constrained situations, which is the case in most real structures.

How to Calculate Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint?

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint calculator uses Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints) to calculate the Tensile Stress in Weld, Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint is defined as the maximum strength that the Weld Beads should be exposed to when in tension. It's a safety limit, considering different aspects of non-uniformity in stress distribution. Tensile Stress in Weld is denoted by σ_t symbol.

How to calculate Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint using this online calculator? To use this online calculator for Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint, enter Tensile Force on Welded Plates (P), Welded Base Plate Thickness (t_p), Length of Weld (L) & Efficiency of Welded Joints (η) and hit the calculate button. Here is how the Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint calculation can be explained with given input values -> 5.6E-5 = 16500/(0.018*0.0195*0.833).

FAQ

What is Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint?

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint is defined as the maximum strength that the Weld Beads should be exposed to when in tension. It's a safety limit, considering different aspects of non-uniformity in stress distribution and is represented as σ_t = P/(t_p*L*η) or Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints). Tensile Force on Welded Plates is the stretching force acting on the plates that are welded, Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

How to calculate Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint?

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint is defined as the maximum strength that the Weld Beads should be exposed to when in tension. It's a safety limit, considering different aspects of non-uniformity in stress distribution is calculated using Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints). To calculate Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint, you need Tensile Force on Welded Plates (P), Welded Base Plate Thickness (t_p), Length of Weld (L) & Efficiency of Welded Joints (η). With our tool, you need to enter the respective value for Tensile Force on Welded Plates, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress in Weld?

In this formula, Tensile Stress in Weld uses Tensile Force on Welded Plates, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints. We can use 3 other way(s) to calculate the same, which is/are as follows -

Tensile Stress in Weld = Tensile Force on Welded Plates/(Beam Width for Nominal Shear*Length of Weld)
Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)
Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)

Home

FREE PDFs

🔍 Search