Permissible Tensile Strength for Double Transverse Fillet Joint Calculator

✖The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.ⓘ Load on Weld [P]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%

✖Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.ⓘ Permissible Tensile Strength for Double Transverse Fillet Joint [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transverse Fillet Weld Formulas PDF PDF Image

Permissible Tensile Strength for Double Transverse Fillet Joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)
σ_t = P/(1.414*L*L)
This formula uses 3 Variables

Variables Used

Tensile Stress in Transverse Fillet Weld - (Measured in Pascal) - Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.
Load on Weld - (Measured in Newton) - The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.

STEP 1: Convert Input(s) to Base Unit

Load on Weld: 268.7 Kilonewton --> 268700 Newton (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P/(1.414*L*L) --> 268700/(1.414*0.195*0.195)

Evaluating ... ...

σ_t = 4997456.63492807

STEP 3: Convert Result to Output's Unit

4997456.63492807 Pascal -->4.99745663492807 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

4.99745663492807 ≈ 4.997457 Newton per Square Millimeter <-- Tensile Stress in Transverse Fillet Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Transverse Fillet Weld » Permissible Tensile Strength for Double Transverse Fillet Joint

Credits

Created by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has created this Calculator and 50+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Transverse Fillet Weld Calculators

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

LaTeX Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)

Tensile Stress in Transverse Fillet Weld

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

LaTeX Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld

Permissible Tensile Strength for Double Transverse Fillet Joint

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)

< Welding Calculators

Dilution

LaTeX Go Dilution = Area of Penetration/(Area of Penetration+Area of Reinforcement)

Resistance Welding

LaTeX Go Resistance Welding = Current Magnitude^2*Resistance*Time

Relation in voltage and arc length

LaTeX Go Voltage = Constant of DC Machine*Arc Length

Void Percentage

LaTeX Go Percentage of Void = 100-Atomic Packing Factor Percentage

Permissible Tensile Strength for Double Transverse Fillet Joint Formula

LaTeX Go

Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)
σ_t = P/(1.414*L*L)

What is permissible tensile strength?

Permissible tensile stress refers to an amount of tensile stress that will not cause failure. It is the maximum stress which a material can hold.The allowable stresses are generally defined by building codes, and for steel, and aluminum is a fraction of their yield stress (strength).

How to Calculate Permissible Tensile Strength for Double Transverse Fillet Joint?

Permissible Tensile Strength for Double Transverse Fillet Joint calculator uses Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld) to calculate the Tensile Stress in Transverse Fillet Weld, The permissible tensile strength for double transverse fillet joint is the amount of tensile stress that will not cause failure. Tensile Stress in Transverse Fillet Weld is denoted by σ_t symbol.

How to calculate Permissible Tensile Strength for Double Transverse Fillet Joint using this online calculator? To use this online calculator for Permissible Tensile Strength for Double Transverse Fillet Joint, enter Load on Weld (P) & Length of Weld (L) and hit the calculate button. Here is how the Permissible Tensile Strength for Double Transverse Fillet Joint calculation can be explained with given input values -> 5E-6 = 268700/(1.414*0.195*0.195).

FAQ

What is Permissible Tensile Strength for Double Transverse Fillet Joint?

The permissible tensile strength for double transverse fillet joint is the amount of tensile stress that will not cause failure and is represented as σ_t = P/(1.414*L*L) or Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld). The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use & The Length of Weld is the linear distance of the welding segment joined by the welded joint.

How to calculate Permissible Tensile Strength for Double Transverse Fillet Joint?

The permissible tensile strength for double transverse fillet joint is the amount of tensile stress that will not cause failure is calculated using Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld). To calculate Permissible Tensile Strength for Double Transverse Fillet Joint, you need Load on Weld (P) & Length of Weld (L). With our tool, you need to enter the respective value for Load on Weld & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress in Transverse Fillet Weld?

In this formula, Tensile Stress in Transverse Fillet Weld uses Load on Weld & Length of Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)
Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Home

FREE PDFs

🔍 Search