Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force Calculator

✖Axial Force for Clutch is the force exerted on the clutch plate to engage or disengage the engine from the transmission in a constant wear scenario.ⓘ Axial Force for Clutch [P_a]			+10% -10%
✖Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan.ⓘ Inner Diameter of Clutch [d_i]			+10% -10%
✖Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory.ⓘ Outer Diameter of Clutch [d_o]			+10% -10%

✖Permissible Intensity of Pressure in Clutch is the maximum allowed pressure in a clutch, ensuring efficient power transmission without wear and tear, according to constant wear theory.ⓘ Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force [p_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Wear Theory Formulas PDF PDF Image

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch))
p_a = 2*P_a/(pi*d_i*(d_o-d_i))
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Permissible Intensity of Pressure in Clutch - (Measured in Pascal) - Permissible Intensity of Pressure in Clutch is the maximum allowed pressure in a clutch, ensuring efficient power transmission without wear and tear, according to constant wear theory.
Axial Force for Clutch - (Measured in Newton) - Axial Force for Clutch is the force exerted on the clutch plate to engage or disengage the engine from the transmission in a constant wear scenario.
Inner Diameter of Clutch - (Measured in Meter) - Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan.
Outer Diameter of Clutch - (Measured in Meter) - Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory.

STEP 1: Convert Input(s) to Base Unit

Axial Force for Clutch: 15900 Newton --> 15900 Newton No Conversion Required
Inner Diameter of Clutch: 100 Millimeter --> 0.1 Meter (Check conversion here)
Outer Diameter of Clutch: 200 Millimeter --> 0.2 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p_a = 2*P_a/(pi*d_i*(d_o-d_i)) --> 2*15900/(pi*0.1*(0.2-0.1))

Evaluating ... ...

p_a = 1012225.43806445

STEP 3: Convert Result to Output's Unit

1012225.43806445 Pascal -->1.01222543806445 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

1.01222543806445 ≈ 1.012225 Newton per Square Millimeter <-- Permissible Intensity of Pressure in Clutch

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Friction Clutches » Mechanical » Constant Wear Theory » Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Sagar S Kulkarni

Dayananda Sagar College of Engineering (DSCE), Bengaluru

Sagar S Kulkarni has verified this Calculator and 200+ more calculators!

< Constant Wear Theory Calculators

Coefficient of Friction of Clutch from Constant Wear Theory

LaTeX Go Coefficient of Friction Clutch = 8*Friction Torque on Clutch/(pi*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2)))

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force

LaTeX Go Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch))

Axial Force on Clutch from Constant Wear Theory given Permissible Intensity of Pressure

LaTeX Go Axial Force for Clutch = pi*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch)/2

Axial Force on Clutch from Constant Wear Theory given Friction Torque

LaTeX Go Axial Force for Clutch = 4*Friction Torque on Clutch/(Coefficient of Friction Clutch*(Outer Diameter of Clutch+Inner Diameter of Clutch))

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force Formula

LaTeX Go

Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch))
p_a = 2*P_a/(pi*d_i*(d_o-d_i))

What is a Permissible Pressure Intensity on Clutch?

Permissible pressure intensity on a clutch refers to the maximum allowable pressure that can be applied to the clutch plates without causing damage or excessive wear. It is determined by factors such as the material properties of the clutch components, the design of the clutch system, and the operating conditions. Maintaining pressure below this limit is crucial for ensuring the clutch functions effectively and has a long service life. Exceeding permissible pressure intensity can lead to overheating, slippage, and premature failure of the clutch.

How to Calculate Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force?

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force calculator uses Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch)) to calculate the Permissible Intensity of Pressure in Clutch, Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force formula is defined as a measure of the maximum pressure that can be applied to a clutch without causing excessive wear, taking into account the axial force and clutch dimensions, to ensure efficient and safe transmission of power. Permissible Intensity of Pressure in Clutch is denoted by p_a symbol.

How to calculate Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force using this online calculator? To use this online calculator for Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force, enter Axial Force for Clutch (P_a), Inner Diameter of Clutch (d_i) & Outer Diameter of Clutch (d_o) and hit the calculate button. Here is how the Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force calculation can be explained with given input values -> 1E-6 = 2*15900/(pi*0.1*(0.2-0.1)).

FAQ

What is Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force?

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force formula is defined as a measure of the maximum pressure that can be applied to a clutch without causing excessive wear, taking into account the axial force and clutch dimensions, to ensure efficient and safe transmission of power and is represented as p_a = 2*P_a/(pi*d_i*(d_o-d_i)) or Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch)). Axial Force for Clutch is the force exerted on the clutch plate to engage or disengage the engine from the transmission in a constant wear scenario, Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan & Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory.

How to calculate Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force?

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force formula is defined as a measure of the maximum pressure that can be applied to a clutch without causing excessive wear, taking into account the axial force and clutch dimensions, to ensure efficient and safe transmission of power is calculated using Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch)). To calculate Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force, you need Axial Force for Clutch (P_a), Inner Diameter of Clutch (d_i) & Outer Diameter of Clutch (d_o). With our tool, you need to enter the respective value for Axial Force for Clutch, Inner Diameter of Clutch & Outer Diameter of Clutch and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Permissible Intensity of Pressure in Clutch?

In this formula, Permissible Intensity of Pressure in Clutch uses Axial Force for Clutch, Inner Diameter of Clutch & Outer Diameter of Clutch. We can use 1 other way(s) to calculate the same, which is/are as follows -

Permissible Intensity of Pressure in Clutch = 8*Friction Torque on Clutch/(pi*Coefficient of Friction Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2)))

Home

FREE PDFs

🔍 Search