Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations Calculator

✖Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.ⓘ Discharge from Dam [Q_t]			+10% -10%
✖The Number of Beds is defined as the number of beds between each of the same potential drops.ⓘ Number of Beds [B]			+10% -10%
✖Head of Water is defined as the height of water columns.ⓘ Head of Water [H_Water]			+10% -10%
✖Equipotential Lines is defined as the number of lines with same potential drop.ⓘ Equipotential Lines [N]			+10% -10%

✖The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.ⓘ Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations [k]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Buttress Dams Formulas PDF PDF Image

Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Permeability of Soil = (Discharge from Dam*Number of Beds)/(Head of Water*Equipotential Lines)
k = (Q_t*B)/(H_Water*N)
This formula uses 5 Variables

Variables Used

Coefficient of Permeability of Soil - (Measured in Meter per Second) - The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.
Discharge from Dam - (Measured in Cubic Meter per Second) - Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Number of Beds - The Number of Beds is defined as the number of beds between each of the same potential drops.
Head of Water - (Measured in Meter) - Head of Water is defined as the height of water columns.
Equipotential Lines - Equipotential Lines is defined as the number of lines with same potential drop.

STEP 1: Convert Input(s) to Base Unit

Discharge from Dam: 0.46 Cubic Meter per Second --> 0.46 Cubic Meter per Second No Conversion Required
Number of Beds: 2 --> No Conversion Required
Head of Water: 2.3 Meter --> 2.3 Meter No Conversion Required
Equipotential Lines: 4 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

k = (Q_t*B)/(H_Water*N) --> (0.46*2)/(2.3*4)

Evaluating ... ...

k = 0.1

STEP 3: Convert Result to Output's Unit

0.1 Meter per Second -->10 Centimeter per Second (Check conversion here)

FINAL ANSWER

10 Centimeter per Second <-- Coefficient of Permeability of Soil

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Buttress Dams » Dams on Soft or Porous Foundations » Dams on Soft or Porous Foundations by Darcy’s law » Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Dams on Soft or Porous Foundations by Darcy’s law Calculators

Velocity given Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Maximum Velocity = Material Coefficient*Head under Flow/Length of Pipe

Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Length of Pipe = Material Coefficient*Head under Flow/Maximum Velocity

Minimum Safe Length of Travel path under Dams on Soft or Porous Foundations

LaTeX Go Minimum Safe Length of Travel path = New Material Coefficient C2*Head under Flow

New Material Coefficient C2 for Dams on Soft or Porous Foundations

LaTeX Go New Material Coefficient C2 = Material Coefficient/Maximum Velocity

Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations Formula

LaTeX Go

Coefficient of Permeability of Soil = (Discharge from Dam*Number of Beds)/(Head of Water*Equipotential Lines)
k = (Q_t*B)/(H_Water*N)

What is Hydraulic Gradient?

The hydraulic gradient is the slope of the water table or potentiometric surface, that is, the change in water level per unit of distance along the direction of maximum head decrease.

How to Calculate Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations?

Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations calculator uses Coefficient of Permeability of Soil = (Discharge from Dam*Number of Beds)/(Head of Water*Equipotential Lines) to calculate the Coefficient of Permeability of Soil, Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations formula is defined as property of material defines ability to conduct. Coefficient of Permeability of Soil is denoted by k symbol.

How to calculate Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations using this online calculator? To use this online calculator for Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations, enter Discharge from Dam (Q_t), Number of Beds (B), Head of Water (H_Water) & Equipotential Lines (N) and hit the calculate button. Here is how the Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations calculation can be explained with given input values -> 1437.5 = (0.46*2)/(2.3*4).

FAQ

What is Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations?

Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations formula is defined as property of material defines ability to conduct and is represented as k = (Q_t*B)/(H_Water*N) or Coefficient of Permeability of Soil = (Discharge from Dam*Number of Beds)/(Head of Water*Equipotential Lines). Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material, The Number of Beds is defined as the number of beds between each of the same potential drops, Head of Water is defined as the height of water columns & Equipotential Lines is defined as the number of lines with same potential drop.

How to calculate Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations?

Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations formula is defined as property of material defines ability to conduct is calculated using Coefficient of Permeability of Soil = (Discharge from Dam*Number of Beds)/(Head of Water*Equipotential Lines). To calculate Permeability given Hydraulic gradient per unit head for Dams on Soft Foundations, you need Discharge from Dam (Q_t), Number of Beds (B), Head of Water (H_Water) & Equipotential Lines (N). With our tool, you need to enter the respective value for Discharge from Dam, Number of Beds, Head of Water & Equipotential Lines and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search