Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C Solution

STEP 0: Pre-Calculation Summary
Formula Used
Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped)
P = 4*((TSA-LSA)/(2*Sc*sin(∠β))+Sb+Sc)
This formula uses 1 Functions, 6 Variables
Functions Used
sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
Variables Used
Perimeter of Parallelepiped - (Measured in Meter) - Perimeter of Parallelepiped is the total distance around the edge of the Parallelepiped.
Total Surface Area of Parallelepiped - (Measured in Square Meter) - Total Surface Area of Parallelepiped is the total quantity of plane enclosed by the entire surface of the Parallelepiped.
Lateral Surface Area of Parallelepiped - (Measured in Square Meter) - Lateral Surface Area of Parallelepiped is the quantity of plane enclosed by all the lateral surfaces (that is, top and bottom faces are excluded) of the Parallelepiped.
Side C of Parallelepiped - (Measured in Meter) - Side C of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped.
Angle Beta of Parallelepiped - (Measured in Radian) - Angle Beta of Parallelepiped is the angle formed by side A and side C at any of the two sharp tips of the Parallelepiped.
Side B of Parallelepiped - (Measured in Meter) - Side B of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped.
STEP 1: Convert Input(s) to Base Unit
Total Surface Area of Parallelepiped: 1960 Square Meter --> 1960 Square Meter No Conversion Required
Lateral Surface Area of Parallelepiped: 1440 Square Meter --> 1440 Square Meter No Conversion Required
Side C of Parallelepiped: 10 Meter --> 10 Meter No Conversion Required
Angle Beta of Parallelepiped: 60 Degree --> 1.0471975511964 Radian (Check conversion ​here)
Side B of Parallelepiped: 20 Meter --> 20 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = 4*((TSA-LSA)/(2*Sc*sin(∠β))+Sb+Sc) --> 4*((1960-1440)/(2*10*sin(1.0471975511964))+20+10)
Evaluating ... ...
P = 240.088855991456
STEP 3: Convert Result to Output's Unit
240.088855991456 Meter --> No Conversion Required
FINAL ANSWER
240.088855991456 240.0889 Meter <-- Perimeter of Parallelepiped
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Divanshi Jain
Netaji Subhash University of Technology, Delhi (NSUT Delhi), Dwarka
Divanshi Jain has created this Calculator and 300+ more calculators!
Verifier Image
Verified by Dhruv Walia
Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand
Dhruv Walia has verified this Calculator and 400+ more calculators!

Perimeter of Parallelepiped Calculators

Perimeter of Parallelepiped given Volume, Side A and Side B
​ LaTeX ​ Go Perimeter of Parallelepiped = 4*(Side A of Parallelepiped+Side B of Parallelepiped+Volume of Parallelepiped/(Side B of Parallelepiped*Side A of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))))
Perimeter of Parallelepiped given Volume, Side B and Side C
​ LaTeX ​ Go Perimeter of Parallelepiped = 4*(Volume of Parallelepiped/(Side B of Parallelepiped*Side C of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2)))+Side B of Parallelepiped+Side C of Parallelepiped)
Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C
​ LaTeX ​ Go Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped)
Perimeter of Parallelepiped
​ LaTeX ​ Go Perimeter of Parallelepiped = 4*(Side A of Parallelepiped+Side B of Parallelepiped+Side C of Parallelepiped)

Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C Formula

​LaTeX ​Go
Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped)
P = 4*((TSA-LSA)/(2*Sc*sin(∠β))+Sb+Sc)

What is a Parallelepiped?

A Parallelepiped is a three-dimensional figure formed by six parallelograms (the term rhomboid is also sometimes used with this meaning). By analogy, it relates to a parallelogram just as a cube relates to a square. In Euclidean geometry, the four concepts—parallelepiped and cube in three dimensions, parallelogram and square in two dimensions—are defined, but in the context of a more general affine geometry, in which angles are not differentiated, only parallelograms and parallelepipeds exist.

How to Calculate Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C?

Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C calculator uses Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped) to calculate the Perimeter of Parallelepiped, The Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C formula is defined as the total distance around the edge of the Parallelepiped, calculated using lateral surface area, total surface area, side B and side C of Parallelepiped. Perimeter of Parallelepiped is denoted by P symbol.

How to calculate Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C using this online calculator? To use this online calculator for Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C, enter Total Surface Area of Parallelepiped (TSA), Lateral Surface Area of Parallelepiped (LSA), Side C of Parallelepiped (Sc), Angle Beta of Parallelepiped (∠β) & Side B of Parallelepiped (Sb) and hit the calculate button. Here is how the Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C calculation can be explained with given input values -> 240.0889 = 4*((1960-1440)/(2*10*sin(1.0471975511964))+20+10).

FAQ

What is Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C?
The Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C formula is defined as the total distance around the edge of the Parallelepiped, calculated using lateral surface area, total surface area, side B and side C of Parallelepiped and is represented as P = 4*((TSA-LSA)/(2*Sc*sin(∠β))+Sb+Sc) or Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped). Total Surface Area of Parallelepiped is the total quantity of plane enclosed by the entire surface of the Parallelepiped, Lateral Surface Area of Parallelepiped is the quantity of plane enclosed by all the lateral surfaces (that is, top and bottom faces are excluded) of the Parallelepiped, Side C of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped, Angle Beta of Parallelepiped is the angle formed by side A and side C at any of the two sharp tips of the Parallelepiped & Side B of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped.
How to calculate Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C?
The Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C formula is defined as the total distance around the edge of the Parallelepiped, calculated using lateral surface area, total surface area, side B and side C of Parallelepiped is calculated using Perimeter of Parallelepiped = 4*((Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/(2*Side C of Parallelepiped*sin(Angle Beta of Parallelepiped))+Side B of Parallelepiped+Side C of Parallelepiped). To calculate Perimeter of Parallelepiped given Lateral Surafce Area, Total Surface Area, Side B and Side C, you need Total Surface Area of Parallelepiped (TSA), Lateral Surface Area of Parallelepiped (LSA), Side C of Parallelepiped (Sc), Angle Beta of Parallelepiped (∠β) & Side B of Parallelepiped (Sb). With our tool, you need to enter the respective value for Total Surface Area of Parallelepiped, Lateral Surface Area of Parallelepiped, Side C of Parallelepiped, Angle Beta of Parallelepiped & Side B of Parallelepiped and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Perimeter of Parallelepiped?
In this formula, Perimeter of Parallelepiped uses Total Surface Area of Parallelepiped, Lateral Surface Area of Parallelepiped, Side C of Parallelepiped, Angle Beta of Parallelepiped & Side B of Parallelepiped. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Perimeter of Parallelepiped = 4*(Side A of Parallelepiped+Side B of Parallelepiped+Side C of Parallelepiped)
  • Perimeter of Parallelepiped = 4*(Side A of Parallelepiped+Side B of Parallelepiped+Volume of Parallelepiped/(Side B of Parallelepiped*Side A of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))))
  • Perimeter of Parallelepiped = 4*(Volume of Parallelepiped/(Side B of Parallelepiped*Side C of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2)))+Side B of Parallelepiped+Side C of Parallelepiped)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!