Percent Solids given Weight Flow Rate of Sludge Feed Calculator

✖Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.ⓘ Weight Flow Rate of Sludge Feed [W_s]			+10% -10%
✖Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.ⓘ Volume Flow Rate of Sludge Feed [V]			+10% -10%
✖Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.ⓘ Water Density [ρ_water]			+10% -10%
✖Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.ⓘ Specific Gravity of Sludge [G_s]			+10% -10%

✖Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.ⓘ Percent Solids given Weight Flow Rate of Sludge Feed [%S]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of a Solid Bowl Centrifuge for Sludge Dewatering Formulas PDF PDF Image

Percent Solids given Weight Flow Rate of Sludge Feed Solution

STEP 0: Pre-Calculation Summary

Formula Used

Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60)
%S = (7.48*W_s)/(V*ρ_water*G_s*60)
This formula uses 5 Variables

Variables Used

Percent Solids - Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.
Weight Flow Rate of Sludge Feed - (Measured in Pound per Hour) - Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.
Volume Flow Rate of Sludge Feed - (Measured in Gallon (US) per Min) - Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.
Water Density - (Measured in Pound per Cubic Foot) - Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.
Specific Gravity of Sludge - Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.

STEP 1: Convert Input(s) to Base Unit

Weight Flow Rate of Sludge Feed: 3153.36 Pound per Hour --> 3153.36 Pound per Hour No Conversion Required
Volume Flow Rate of Sludge Feed: 7 Gallon (US) per Min --> 7 Gallon (US) per Min No Conversion Required
Water Density: 62.4 Pound per Cubic Foot --> 62.4 Pound per Cubic Foot No Conversion Required
Specific Gravity of Sludge: 2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

%S = (7.48*W_s)/(V*ρ_water*G_s*60) --> (7.48*3153.36)/(7*62.4*2*60)

Evaluating ... ...

%S = 0.449998717948718

STEP 3: Convert Result to Output's Unit

0.449998717948718 --> No Conversion Required

FINAL ANSWER

0.449998717948718 ≈ 0.449999 <-- Percent Solids

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Solid Bowl Centrifuge for Sludge Dewatering » Weight Flow Rate of Sludge Feed » Percent Solids given Weight Flow Rate of Sludge Feed

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Weight Flow Rate of Sludge Feed Calculators

Volume Flow Rate of Sludge Feed using Weight Flow Rate

LaTeX Go Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60)

Percent Solids given Weight Flow Rate of Sludge Feed

LaTeX Go Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60)

Specific Gravity of Sludge using Weight Flow Rate

LaTeX Go Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60)

Weight Flow Rate of Sludge Feed

LaTeX Go Weight Flow Rate of Sludge Feed = (Volume Flow Rate of Sludge Feed*Specific Gravity of Sludge*Water Density*Percent Solids*60)/7.48

Percent Solids given Weight Flow Rate of Sludge Feed Formula

LaTeX Go

Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60)
%S = (7.48*W_s)/(V*ρ_water*G_s*60)

What is Percent Solids ?

Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. The quantification of percent solids is used when applying corrosion preventive coatings on metals. The higher the percent solids, the more viscous a coat is and vice versa.

How to Calculate Percent Solids given Weight Flow Rate of Sludge Feed?

Percent Solids given Weight Flow Rate of Sludge Feed calculator uses Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60) to calculate the Percent Solids, The Percent Solids given Weight Flow Rate of Sludge Feed is defined as the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. Percent Solids is denoted by %S symbol.

How to calculate Percent Solids given Weight Flow Rate of Sludge Feed using this online calculator? To use this online calculator for Percent Solids given Weight Flow Rate of Sludge Feed, enter Weight Flow Rate of Sludge Feed (W_s), Volume Flow Rate of Sludge Feed (V), Water Density (ρ_water) & Specific Gravity of Sludge (G_s) and hit the calculate button. Here is how the Percent Solids given Weight Flow Rate of Sludge Feed calculation can be explained with given input values -> 0.033738 = (7.48*0.397316676637457)/(0.000441631374796905*999.552114545232*2*60).

FAQ

What is Percent Solids given Weight Flow Rate of Sludge Feed?

The Percent Solids given Weight Flow Rate of Sludge Feed is defined as the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample and is represented as %S = (7.48*W_s)/(V*ρ_water*G_s*60) or Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60). Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time, Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time, Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet & Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.

How to calculate Percent Solids given Weight Flow Rate of Sludge Feed?

The Percent Solids given Weight Flow Rate of Sludge Feed is defined as the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample is calculated using Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60). To calculate Percent Solids given Weight Flow Rate of Sludge Feed, you need Weight Flow Rate of Sludge Feed (W_s), Volume Flow Rate of Sludge Feed (V), Water Density (ρ_water) & Specific Gravity of Sludge (G_s). With our tool, you need to enter the respective value for Weight Flow Rate of Sludge Feed, Volume Flow Rate of Sludge Feed, Water Density & Specific Gravity of Sludge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search