Pitch of Rivets given Tensile Resistance of Plate between two Rivets Calculator

✖Tensile Resistance of Plate Per Rivet Pitch is defined as the maximum load that the riveted plate material can support without fracture when being stretched.ⓘ Tensile Resistance of Plate Per Rivet Pitch [P_t]			+10% -10%
✖Thickness of Plate 1 of Riveted Joint is defined as the thickness of the first plate that is joined by the rivet.ⓘ Thickness of Plate 1 of Riveted Joint [t₁]			+10% -10%
✖Tensile Stress in Riveted Plate is the stress developed into the plate joined by the riveted joint due to the tensile load acting onto it.ⓘ Tensile Stress in Riveted Plate [σ_t]			+10% -10%
✖Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.ⓘ Diameter of Rivet [d]			+10% -10%

✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of Rivets given Tensile Resistance of Plate between two Rivets [p]

⎘ Copy

👎

Formula

✖

Pitch of Rivets given Tensile Resistance of Plate between two Rivets

Formula

p = (\frac{P t}{t 1 \cdot σ t}) + d

Example

54.03774 mm = (\frac{28650 N}{10.6 mm \cdot 75 N/mm²}) + 18 mm

Calculator

LaTeX

Reset

👍

Download Rivet Dimensions Formulas PDF PDF Image

Pitch of Rivets given Tensile Resistance of Plate between two Rivets Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet
p = (P_t/(t₁*σ_t))+d
This formula uses 5 Variables

Variables Used

Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Tensile Resistance of Plate Per Rivet Pitch - (Measured in Newton) - Tensile Resistance of Plate Per Rivet Pitch is defined as the maximum load that the riveted plate material can support without fracture when being stretched.
Thickness of Plate 1 of Riveted Joint - (Measured in Meter) - Thickness of Plate 1 of Riveted Joint is defined as the thickness of the first plate that is joined by the rivet.
Tensile Stress in Riveted Plate - (Measured in Pascal) - Tensile Stress in Riveted Plate is the stress developed into the plate joined by the riveted joint due to the tensile load acting onto it.
Diameter of Rivet - (Measured in Meter) - Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

STEP 1: Convert Input(s) to Base Unit

Tensile Resistance of Plate Per Rivet Pitch: 28650 Newton --> 28650 Newton No Conversion Required
Thickness of Plate 1 of Riveted Joint: 10.6 Millimeter --> 0.0106 Meter (Check conversion here)
Tensile Stress in Riveted Plate: 75 Newton per Square Millimeter --> 75000000 Pascal (Check conversion here)
Diameter of Rivet: 18 Millimeter --> 0.018 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p = (P_t/(t₁*σ_t))+d --> (28650/(0.0106*75000000))+0.018

Evaluating ... ...

p = 0.0540377358490566

STEP 3: Convert Result to Output's Unit

0.0540377358490566 Meter -->54.0377358490566 Millimeter (Check conversion here)

FINAL ANSWER

54.0377358490566 ≈ 54.03774 Millimeter <-- Pitch of Rivet

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Riveted Joints » Mechanical » Rivet Dimensions » Pitch of Rivets given Tensile Resistance of Plate between two Rivets

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Rivet Dimensions Calculators

Pitch of Rivets given Tensile Resistance of Plate between two Rivets

Go Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet

Diameter of Rivet given Margin of Rivet

Go Diameter of Rivet = Margin of Rivet/1.5

Margin of Rivet

Go Margin of Rivet = 1.5*Diameter of Rivet

Pitch of Rivet

Go Pitch of Rivet = 3*Diameter of Rivet

Pitch of Rivets given Tensile Resistance of Plate between two Rivets Formula

Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet
p = (P_t/(t₁*σ_t))+d

Define Tensile Resistance?

Tensile strength, maximum load that a material can support without fracture when being stretched, divided by the original cross-sectional area of the material. Tensile strengths have dimensions of force per unit area and in the English system of measurement are commonly expressed in units of pounds per square inch, often abbreviated to psi.

How to Calculate Pitch of Rivets given Tensile Resistance of Plate between two Rivets?

Pitch of Rivets given Tensile Resistance of Plate between two Rivets calculator uses Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet to calculate the Pitch of Rivet, The Pitch of Rivets given Tensile Resistance of Plate between two Rivets formula is defined as is the distance between the center of one rivet to the center of the adjacent rivet in the same row. Pitch of Rivet is denoted by p symbol.

How to calculate Pitch of Rivets given Tensile Resistance of Plate between two Rivets using this online calculator? To use this online calculator for Pitch of Rivets given Tensile Resistance of Plate between two Rivets, enter Tensile Resistance of Plate Per Rivet Pitch (P_t), Thickness of Plate 1 of Riveted Joint (t₁), Tensile Stress in Riveted Plate (σ_t) & Diameter of Rivet (d) and hit the calculate button. Here is how the Pitch of Rivets given Tensile Resistance of Plate between two Rivets calculation can be explained with given input values -> 54037.74 = (28650/(0.0106*75000000))+0.018.

FAQ

What is Pitch of Rivets given Tensile Resistance of Plate between two Rivets?

The Pitch of Rivets given Tensile Resistance of Plate between two Rivets formula is defined as is the distance between the center of one rivet to the center of the adjacent rivet in the same row and is represented as p = (P_t/(t₁*σ_t))+d or Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet. Tensile Resistance of Plate Per Rivet Pitch is defined as the maximum load that the riveted plate material can support without fracture when being stretched, Thickness of Plate 1 of Riveted Joint is defined as the thickness of the first plate that is joined by the rivet, Tensile Stress in Riveted Plate is the stress developed into the plate joined by the riveted joint due to the tensile load acting onto it & Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

How to calculate Pitch of Rivets given Tensile Resistance of Plate between two Rivets?

The Pitch of Rivets given Tensile Resistance of Plate between two Rivets formula is defined as is the distance between the center of one rivet to the center of the adjacent rivet in the same row is calculated using Pitch of Rivet = (Tensile Resistance of Plate Per Rivet Pitch/(Thickness of Plate 1 of Riveted Joint*Tensile Stress in Riveted Plate))+Diameter of Rivet. To calculate Pitch of Rivets given Tensile Resistance of Plate between two Rivets, you need Tensile Resistance of Plate Per Rivet Pitch (P_t), Thickness of Plate 1 of Riveted Joint (t₁), Tensile Stress in Riveted Plate (σ_t) & Diameter of Rivet (d). With our tool, you need to enter the respective value for Tensile Resistance of Plate Per Rivet Pitch, Thickness of Plate 1 of Riveted Joint, Tensile Stress in Riveted Plate & Diameter of Rivet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Pitch of Rivet?

In this formula, Pitch of Rivet uses Tensile Resistance of Plate Per Rivet Pitch, Thickness of Plate 1 of Riveted Joint, Tensile Stress in Riveted Plate & Diameter of Rivet. We can use 1 other way(s) to calculate the same, which is/are as follows -

Pitch of Rivet = 3*Diameter of Rivet

Home

FREE PDFs

🔍 Search