Pitch of rivet given safe tensile load that plate can withstand Calculator

✖Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Load [P_load]			+10% -10%
✖Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%

✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of rivet given safe tensile load that plate can withstand [p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Pitch of rivet given safe tensile load that plate can withstand Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter
p = (P_load/(σ_t*t_plate))+D_rivet
This formula uses 5 Variables

Variables Used

Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Tensile Load - (Measured in Newton) - Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.
Tensile Stress - (Measured in Pascal) - Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

STEP 1: Convert Input(s) to Base Unit

Tensile Load: 0.012 Kilonewton --> 12 Newton (Check conversion here)
Tensile Stress: 0.173 Megapascal --> 173000 Pascal (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p = (P_load/(σ_t*t_plate))+D_rivet --> (12/(173000*0.012))+0.018

Evaluating ... ...

p = 0.0237803468208092

STEP 3: Convert Result to Output's Unit

0.0237803468208092 Meter -->23.7803468208092 Millimeter (Check conversion here)

FINAL ANSWER

23.7803468208092 ≈ 23.78035 Millimeter <-- Pitch of Rivet

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Tearing of the Plate Between Rivets of a Row » Pitch of rivet given safe tensile load that plate can withstand

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Tearing of the Plate Between Rivets of a Row Calculators

Safe tensile load that plate can withstand

LaTeX Go Tensile Load = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate

Area of plate for given safe tensile load that plate can withstand

LaTeX Go Area of Base Plate = Tensile Load/Tensile Stress

Safe tensile load that plate can withstand given area of plate

LaTeX Go Tensile Load = Tensile Stress*Area of Base Plate

Safe tensile stress given area of base plate and tensile load

LaTeX Go Tensile Stress = Tensile Load/Area of Base Plate

Pitch of rivet given safe tensile load that plate can withstand Formula

LaTeX Go

Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter
p = (P_load/(σ_t*t_plate))+D_rivet

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Pitch of rivet given safe tensile load that plate can withstand?

Pitch of rivet given safe tensile load that plate can withstand calculator uses Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter to calculate the Pitch of Rivet, The Pitch of rivet given safe tensile load that plate can withstand formula is defined as the distance between two consecutive rivets measured parallel to the direction of the force in the structural member, lying on the same rivet line. Pitch of Rivet is denoted by p symbol.

How to calculate Pitch of rivet given safe tensile load that plate can withstand using this online calculator? To use this online calculator for Pitch of rivet given safe tensile load that plate can withstand, enter Tensile Load (P_load), Tensile Stress (σ_t), Thickness of Plate (t_plate) & Rivet Diameter (D_rivet) and hit the calculate button. Here is how the Pitch of rivet given safe tensile load that plate can withstand calculation can be explained with given input values -> 4.6E+6 = (12/(173000*0.012))+0.018.

FAQ

What is Pitch of rivet given safe tensile load that plate can withstand?

The Pitch of rivet given safe tensile load that plate can withstand formula is defined as the distance between two consecutive rivets measured parallel to the direction of the force in the structural member, lying on the same rivet line and is represented as p = (P_load/(σ_t*t_plate))+D_rivet or Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter. Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen, Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force, The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness & Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

How to calculate Pitch of rivet given safe tensile load that plate can withstand?

The Pitch of rivet given safe tensile load that plate can withstand formula is defined as the distance between two consecutive rivets measured parallel to the direction of the force in the structural member, lying on the same rivet line is calculated using Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter. To calculate Pitch of rivet given safe tensile load that plate can withstand, you need Tensile Load (P_load), Tensile Stress (σ_t), Thickness of Plate (t_plate) & Rivet Diameter (D_rivet). With our tool, you need to enter the respective value for Tensile Load, Tensile Stress, Thickness of Plate & Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search