Peak to Valley Height given Feed and Radius Calculator

✖Feed is the rate at which a cutter moves through material.ⓘ Feed [F_cutter]			+10% -10%
✖Radius is a radial line from the focus to any point of a curve.ⓘ Radius [r_{metal cutting}]			+10% -10%

✖Peak to Valley Height is proposed as a measure for the extent of separation of two chromatographic peaks.ⓘ Peak to Valley Height given Feed and Radius [PVH]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Peak to Valley Height given Feed and Radius Solution

STEP 0: Pre-Calculation Summary

Formula Used

Peak to Valley Height = (Feed^2)/8*Radius
PVH = (F_cutter^2)/8*r_{metal cutting}
This formula uses 3 Variables

Variables Used

Peak to Valley Height - (Measured in Meter) - Peak to Valley Height is proposed as a measure for the extent of separation of two chromatographic peaks.
Feed - (Measured in Meter) - Feed is the rate at which a cutter moves through material.
Radius - (Measured in Meter) - Radius is a radial line from the focus to any point of a curve.

STEP 1: Convert Input(s) to Base Unit

Feed: 12 Millimeter --> 0.012 Meter (Check conversion here)
Radius: 6232 Millimeter --> 6.232 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

PVH = (F_cutter^2)/8*r_{metal cutting} --> (0.012^2)/8*6.232

Evaluating ... ...

PVH = 0.000112176

STEP 3: Convert Result to Output's Unit

0.000112176 Meter -->0.112176 Millimeter (Check conversion here)

FINAL ANSWER

0.112176 Millimeter <-- Peak to Valley Height

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Manufacturing » Metal Cutting » Peak to Valley Height given Feed and Radius

Credits

Created by Anirudh Singh

National Institute of Technology (NIT), Jamshedpur

Anirudh Singh has created this Calculator and 300+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Metal Cutting Calculators

Shear Plane Angle

LaTeX Go Shear Angle Metal = arctan((Chip Ratio*cos(Rake Angle))/(1-Chip Ratio*sin(Rake Angle)))

Shear Angle

LaTeX Go Shear Angle Metal = atan(Width*cos(Theta)/(1-Width*sin(Theta)))

Shear Force

LaTeX Go Shear Force = Centripetal Force*cos(Theta)-Tangential Force*sin(Theta)

Shear Strain

LaTeX Go Shear Strain = tan(Shear Angle Metal)+cot(Shear Angle Metal-Rake Angle)

Peak to Valley Height given Feed and Radius Formula

LaTeX Go

Peak to Valley Height = (Feed^2)/8*Radius
PVH = (F_cutter^2)/8*r_{metal cutting}

What is peak height of a peakgroup?

If the value of PeakGroup is 1 or 2, the maximum y value of the 1 or 2 points at the point of zero-crossing is taken as the peak height value; if PeakGroup is n is 3 or greater, the average of the next n points is taken as the peak height value.

How to Calculate Peak to Valley Height given Feed and Radius?

Peak to Valley Height given Feed and Radius calculator uses Peak to Valley Height = (Feed^2)/8*Radius to calculate the Peak to Valley Height, Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks. Peak to Valley Height is denoted by PVH symbol.

How to calculate Peak to Valley Height given Feed and Radius using this online calculator? To use this online calculator for Peak to Valley Height given Feed and Radius, enter Feed (F_cutter) & Radius (r_{metal cutting}) and hit the calculate button. Here is how the Peak to Valley Height given Feed and Radius calculation can be explained with given input values -> 112.176 = (0.012^2)/8*6.232.

FAQ

What is Peak to Valley Height given Feed and Radius?

Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks and is represented as PVH = (F_cutter^2)/8*r_{metal cutting} or Peak to Valley Height = (Feed^2)/8*Radius. Feed is the rate at which a cutter moves through material & Radius is a radial line from the focus to any point of a curve.

How to calculate Peak to Valley Height given Feed and Radius?

Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks is calculated using Peak to Valley Height = (Feed^2)/8*Radius. To calculate Peak to Valley Height given Feed and Radius, you need Feed (F_cutter) & Radius (r_{metal cutting}). With our tool, you need to enter the respective value for Feed & Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search