Peak Rate of Runoff given Sediment Yield from Individual Storm Calculator

✖Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.ⓘ Sediment Yield from an Individual Storm [Y]			+10% -10%
✖Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.ⓘ Soil Erodibility Factor [K]			+10% -10%
✖Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.ⓘ Topographic factor [K_zt]			+10% -10%
✖Cover Management Factor reflects the effect of cropping and management practices on erosion rates.ⓘ Cover Management Factor [C]			+10% -10%
✖Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.ⓘ Support Practice Factor [P]			+10% -10%
✖Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.ⓘ Runoff Volume [Q_V]			+10% -10%

✖Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.ⓘ Peak Rate of Runoff given Sediment Yield from Individual Storm [q_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Soil Loss Equation Formulas PDF PDF Image

Peak Rate of Runoff given Sediment Yield from Individual Storm Solution

STEP 0: Pre-Calculation Summary

Formula Used

Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume
q_p = ((Y/(11.8*K*K_zt*C*P))^(1/0.56))/Q_V
This formula uses 7 Variables

Variables Used

Peak Rate of Runoff - (Measured in Cubic Meter per Second) - Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.
Sediment Yield from an Individual Storm - (Measured in Kilogram) - Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.
Soil Erodibility Factor - Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.
Topographic factor - Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.
Cover Management Factor - Cover Management Factor reflects the effect of cropping and management practices on erosion rates.
Support Practice Factor - Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.
Runoff Volume - (Measured in Cubic Meter) - Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.

STEP 1: Convert Input(s) to Base Unit

Sediment Yield from an Individual Storm: 135.7332 Kilogram --> 135.7332 Kilogram No Conversion Required
Soil Erodibility Factor: 0.17 --> No Conversion Required
Topographic factor: 25 --> No Conversion Required
Cover Management Factor: 0.61 --> No Conversion Required
Support Practice Factor: 0.74 --> No Conversion Required
Runoff Volume: 19.5 Cubic Meter --> 19.5 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_p = ((Y/(11.8*K*K_zt*C*P))^(1/0.56))/Q_V --> ((135.7332/(11.8*0.17*25*0.61*0.74))^(1/0.56))/19.5

Evaluating ... ...

q_p = 1.25600007988028

STEP 3: Convert Result to Output's Unit

1.25600007988028 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

1.25600007988028 ≈ 1.256 Cubic Meter per Second <-- Peak Rate of Runoff

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Soil Loss Equation » Modified Universal Soil Loss Equation » Peak Rate of Runoff given Sediment Yield from Individual Storm

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Modified Universal Soil Loss Equation Calculators

Storm Runoff Volume given Sediment Yield from Individual Storm

LaTeX Go Runoff Volume = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Peak Rate of Runoff

Peak Rate of Runoff given Sediment Yield from Individual Storm

LaTeX Go Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume

Support Cultivation Practice given Sediment Yield from Individual Storm

LaTeX Go Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)

Sediment Yield from Individual Storm

LaTeX Go Sediment Yield from an Individual Storm = 11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor

Peak Rate of Runoff given Sediment Yield from Individual Storm Formula

LaTeX Go

What is Topographic Factor?

The Topographic Factor is defined as the factors concerned with topography or physical features of an area are called topographic factors, including height, direction of slope and steepness of the slope.

What is Sediment Yield?

Sediment yield can be defined as the amount of sediment reaching or passing a point of interest in a given period of time, and sediment yield estimates are normally given as Tonnes per year or kilograms per year.

How to Calculate Peak Rate of Runoff given Sediment Yield from Individual Storm?

Peak Rate of Runoff given Sediment Yield from Individual Storm calculator uses Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume to calculate the Peak Rate of Runoff, The Peak Rate of Runoff given Sediment Yield from Individual Storm formula is defined as the maximum flow that runs off a land development project from a prescribed storm event. Peak Rate of Runoff is denoted by q_p symbol.

How to calculate Peak Rate of Runoff given Sediment Yield from Individual Storm using this online calculator? To use this online calculator for Peak Rate of Runoff given Sediment Yield from Individual Storm, enter Sediment Yield from an Individual Storm (Y), Soil Erodibility Factor (K), Topographic factor (K_zt), Cover Management Factor (C), Support Practice Factor (P) & Runoff Volume (Q_V) and hit the calculate button. Here is how the Peak Rate of Runoff given Sediment Yield from Individual Storm calculation can be explained with given input values -> 0.966154 = ((135.7332/(11.8*0.17*25*0.61*0.74))^(1/0.56))/19.5.

FAQ

What is Peak Rate of Runoff given Sediment Yield from Individual Storm?

The Peak Rate of Runoff given Sediment Yield from Individual Storm formula is defined as the maximum flow that runs off a land development project from a prescribed storm event and is represented as q_p = ((Y/(11.8*K*K_zt*C*P))^(1/0.56))/Q_V or Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume. Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment, Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact, Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors, Cover Management Factor reflects the effect of cropping and management practices on erosion rates, Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope & Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.

How to calculate Peak Rate of Runoff given Sediment Yield from Individual Storm?

The Peak Rate of Runoff given Sediment Yield from Individual Storm formula is defined as the maximum flow that runs off a land development project from a prescribed storm event is calculated using Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume. To calculate Peak Rate of Runoff given Sediment Yield from Individual Storm, you need Sediment Yield from an Individual Storm (Y), Soil Erodibility Factor (K), Topographic factor (K_zt), Cover Management Factor (C), Support Practice Factor (P) & Runoff Volume (Q_V). With our tool, you need to enter the respective value for Sediment Yield from an Individual Storm, Soil Erodibility Factor, Topographic factor, Cover Management Factor, Support Practice Factor & Runoff Volume and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search