Peak Discharge of D-h Unit Hydrograph Calculator

✖Area of Catchment is the geographical area from which water flows into a particular point, such as a well, stream, or reservoir.ⓘ Area of Catchment [A]

+10%

-10%

✖Peak discharge of a D-h Unit hydrograph is the maximum volume flow rate displays in a unit hydrograph.ⓘ Peak Discharge of D-h Unit Hydrograph [Q_pd]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Synthetic Unit Hydrograph Formula PDF PDF Image

Peak Discharge of D-h Unit Hydrograph Solution

STEP 0: Pre-Calculation Summary

Formula Used

Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4)
Q_pd = 1.79*A^(3/4)
This formula uses 2 Variables

Variables Used

Peak discharge of a D-h Unit hydrograph - (Measured in Cubic Meter per Second) - Peak discharge of a D-h Unit hydrograph is the maximum volume flow rate displays in a unit hydrograph.
Area of Catchment - (Measured in Square Meter) - Area of Catchment is the geographical area from which water flows into a particular point, such as a well, stream, or reservoir.

STEP 1: Convert Input(s) to Base Unit

Area of Catchment: 3 Square Kilometer --> 3000000 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_pd = 1.79*A^(3/4) --> 1.79*3000000^(3/4)

Evaluating ... ...

Q_pd = 129030.972939036

STEP 3: Convert Result to Output's Unit

129030.972939036 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

129030.972939036 ≈ 129031 Cubic Meter per Second <-- Peak discharge of a D-h Unit hydrograph

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Hydrographs » Synthetic Unit Hydrograph » The Indian Practice » Peak Discharge of D-h Unit Hydrograph

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< The Indian Practice Calculators

Weighted Mean Slope given Peak Discharge of D-h Unit Hydrograph

LaTeX Go Weighted Mean Slope = (Peak discharge of a D-h Unit hydrograph/(37.4*Area of Catchment^(3/4)))^(3/2)

Peak Discharge of D-h Unit Hydrograph for Weighted Mean Slope Lesser than 0.0028

LaTeX Go Peak discharge of a D-h Unit hydrograph = 37.4*Area of Catchment^(3/4)*Weighted Mean Slope^(2/3)

Catchment Area given Peak Discharge of D-h Unit Hydrograph

LaTeX Go Area of Catchment = (Peak discharge of a D-h Unit hydrograph/1.79)^(4/3)

Peak Discharge of D-h Unit Hydrograph

LaTeX Go Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4)

Peak Discharge of D-h Unit Hydrograph Formula

LaTeX Go

Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4)
Q_pd = 1.79*A^(3/4)

What is Catchment Area?

Catchment Area is an area of land where all of the precipitation that falls, less the water lost to evaporation and deep aquifer recharge, eventually flows to a single outlet.

How to Calculate Peak Discharge of D-h Unit Hydrograph?

Peak Discharge of D-h Unit Hydrograph calculator uses Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4) to calculate the Peak discharge of a D-h Unit hydrograph, The Peak Discharge of D-h Unit Hydrograph formula is defined as the maximum volume flow rate passing a particular location during a storm event. Peak discharge of a D-h Unit hydrograph is denoted by Q_pd symbol.

How to calculate Peak Discharge of D-h Unit Hydrograph using this online calculator? To use this online calculator for Peak Discharge of D-h Unit Hydrograph, enter Area of Catchment (A) and hit the calculate button. Here is how the Peak Discharge of D-h Unit Hydrograph calculation can be explained with given input values -> 129031 = 1.79*3000000^(3/4).

FAQ

What is Peak Discharge of D-h Unit Hydrograph?

The Peak Discharge of D-h Unit Hydrograph formula is defined as the maximum volume flow rate passing a particular location during a storm event and is represented as Q_pd = 1.79*A^(3/4) or Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4). Area of Catchment is the geographical area from which water flows into a particular point, such as a well, stream, or reservoir.

How to calculate Peak Discharge of D-h Unit Hydrograph?

The Peak Discharge of D-h Unit Hydrograph formula is defined as the maximum volume flow rate passing a particular location during a storm event is calculated using Peak discharge of a D-h Unit hydrograph = 1.79*Area of Catchment^(3/4). To calculate Peak Discharge of D-h Unit Hydrograph, you need Area of Catchment (A). With our tool, you need to enter the respective value for Area of Catchment and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Peak discharge of a D-h Unit hydrograph?

In this formula, Peak discharge of a D-h Unit hydrograph uses Area of Catchment. We can use 2 other way(s) to calculate the same, which is/are as follows -

Peak discharge of a D-h Unit hydrograph = 37.4*Area of Catchment^(3/4)*Weighted Mean Slope^(2/3)
Peak discharge of a D-h Unit hydrograph = (Area of Catchment)*(1.56/Lag Time of a 1-h Unit Hydrograph)^(1/0.9)

Home

FREE PDFs

🔍 Search