Overpressure due to Charge Exploded on Ground Surface Calculator

✖Maximum Weight of Explosives per Delay is a single blasting delay to ensure safe and controlled detonation during mining or construction operations.ⓘ Maximum Weight of Explosives per Delay [W]			+10% -10%
✖Distance from Explosion to Exposure is the space between a hazardous blast and vulnerable entities, measuring potential impact range.ⓘ Distance from Explosion to Exposure [D]			+10% -10%

✖Overpressure for a charge exploded on the ground surface.ⓘ Overpressure due to Charge Exploded on Ground Surface [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Vibration Control in Blasting Formulas PDF PDF Image

Overpressure due to Charge Exploded on Ground Surface Solution

STEP 0: Pre-Calculation Summary

Formula Used

Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407)
P = 226.62*((W)^(1/3)/D)^(1.407)
This formula uses 3 Variables

Variables Used

Overpressure - (Measured in Pascal) - Overpressure for a charge exploded on the ground surface.
Maximum Weight of Explosives per Delay - (Measured in Kilogram) - Maximum Weight of Explosives per Delay is a single blasting delay to ensure safe and controlled detonation during mining or construction operations.
Distance from Explosion to Exposure - (Measured in Meter) - Distance from Explosion to Exposure is the space between a hazardous blast and vulnerable entities, measuring potential impact range.

STEP 1: Convert Input(s) to Base Unit

Maximum Weight of Explosives per Delay: 62 Kilogram --> 62 Kilogram No Conversion Required
Distance from Explosion to Exposure: 5.01 Meter --> 5.01 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = 226.62*((W)^(1/3)/D)^(1.407) --> 226.62*((62)^(1/3)/5.01)^(1.407)

Evaluating ... ...

P = 162.651569104813

STEP 3: Convert Result to Output's Unit

162.651569104813 Pascal -->0.162651569104813 Kilopascal (Check conversion here)

FINAL ANSWER

0.162651569104813 ≈ 0.162652 Kilopascal <-- Overpressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Vibration Control in Blasting » Parameters of Vibration Control in Blasting » Overpressure due to Charge Exploded on Ground Surface

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Parameters of Vibration Control in Blasting Calculators

Frequency of Vibration given Acceleration of Particles

LaTeX Go Frequency of Vibration = sqrt(Acceleration of Particles/(4*(pi)^2*Amplitude of Vibration))

Amplitude of Vibrations using Velocity of Particle

LaTeX Go Amplitude of Vibration = (Velocity of Particle/(2*pi*Frequency of Vibration))

Frequency of Vibration given Velocity of Particle

LaTeX Go Frequency of Vibration = (Velocity of Particle/(2*pi*Amplitude of Vibration))

Frequency of Vibrations caused by Blasting

LaTeX Go Frequency of Vibration = (Velocity of Vibration/Wavelength of Vibration)

Overpressure due to Charge Exploded on Ground Surface Formula

LaTeX Go

Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407)
P = 226.62*((W)^(1/3)/D)^(1.407)

What is Overpressure?

Overpressure (or blast overpressure) is the pressure caused by a shock wave over and above normal atmospheric pressure. The shock wave may be caused by sonic boom or by explosion, and the resulting overpressure receives particular attention when measuring the effects of nuclear weapons or thermobaric bombs.

How to Calculate Overpressure due to Charge Exploded on Ground Surface?

Overpressure due to Charge Exploded on Ground Surface calculator uses Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407) to calculate the Overpressure, The Overpressure due to Charge Exploded on Ground Surface is defined as the overpressure on the ground surface due to charge exploded when weight and distance from explosion is known. Overpressure is denoted by P symbol.

How to calculate Overpressure due to Charge Exploded on Ground Surface using this online calculator? To use this online calculator for Overpressure due to Charge Exploded on Ground Surface, enter Maximum Weight of Explosives per Delay (W) & Distance from Explosion to Exposure (D) and hit the calculate button. Here is how the Overpressure due to Charge Exploded on Ground Surface calculation can be explained with given input values -> 0.000163 = 226.62*((62)^(1/3)/5.01)^(1.407).

FAQ

What is Overpressure due to Charge Exploded on Ground Surface?

The Overpressure due to Charge Exploded on Ground Surface is defined as the overpressure on the ground surface due to charge exploded when weight and distance from explosion is known and is represented as P = 226.62*((W)^(1/3)/D)^(1.407) or Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407). Maximum Weight of Explosives per Delay is a single blasting delay to ensure safe and controlled detonation during mining or construction operations & Distance from Explosion to Exposure is the space between a hazardous blast and vulnerable entities, measuring potential impact range.

How to calculate Overpressure due to Charge Exploded on Ground Surface?

The Overpressure due to Charge Exploded on Ground Surface is defined as the overpressure on the ground surface due to charge exploded when weight and distance from explosion is known is calculated using Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407). To calculate Overpressure due to Charge Exploded on Ground Surface, you need Maximum Weight of Explosives per Delay (W) & Distance from Explosion to Exposure (D). With our tool, you need to enter the respective value for Maximum Weight of Explosives per Delay & Distance from Explosion to Exposure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Overpressure?

In this formula, Overpressure uses Maximum Weight of Explosives per Delay & Distance from Explosion to Exposure. We can use 1 other way(s) to calculate the same, which is/are as follows -

Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28))

Home

FREE PDFs

🔍 Search