Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 Solution

STEP 0: Pre-Calculation Summary
Formula Used
Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2)
Vout = Vin*R2/(R1+R2)
This formula uses 4 Variables
Variables Used
Output Voltage - (Measured in Volt) - Output Voltage is electrical voltage produced by the device after it has processed an input signal.
Input Voltage - (Measured in Volt) - Input Voltage is the value of the voltage applied to the op-amp.
Resistance 2 - (Measured in Ohm) - Resistance 2 is the value of resistor 2 of the oscillator.
Resistance 1 - (Measured in Ohm) - Resistance 1 is the value of resistor 1 of the oscillator.
STEP 1: Convert Input(s) to Base Unit
Input Voltage: 5.12 Volt --> 5.12 Volt No Conversion Required
Resistance 2: 0.5 Ohm --> 0.5 Ohm No Conversion Required
Resistance 1: 0.59 Ohm --> 0.59 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vout = Vin*R2/(R1+R2) --> 5.12*0.5/(0.59+0.5)
Evaluating ... ...
Vout = 2.34862385321101
STEP 3: Convert Result to Output's Unit
2.34862385321101 Volt --> No Conversion Required
FINAL ANSWER
2.34862385321101 2.348624 Volt <-- Output Voltage
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Nikita Suryawanshi
Vellore Institute of Technology (VIT), Vellore
Nikita Suryawanshi has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Signal Converter Calculators

Output Voltage of Triangle to Sine Converter with Diode 1
​ LaTeX ​ Go Output Voltage = Input Voltage*((Resistance 2*Resistance 3)/((Resistance 1*Resistance 2)+(Resistance 1*Resistance 3)+(Resistance 2*Resistance 3)))
Output Voltage of Triangle to Sine Converter with Diode 2
​ LaTeX ​ Go Output Voltage = Input Voltage*((Resistance 2*Resistance 4)/((Resistance 1*Resistance 2)+(Resistance 1*Resistance 4)+(Resistance 2*Resistance 4)))
Upper Trigger Point Voltage in Triangle to Square Converter
​ LaTeX ​ Go Upper Trigger Voltage = Output Voltage*(Resistance 3/(Resistance 2+Resistance 3))
Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2
​ LaTeX ​ Go Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2)

Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 Formula

​LaTeX ​Go
Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2)
Vout = Vin*R2/(R1+R2)

What is a sine wave generator used for?

The Sine Wave Generator is an excellent tool for generating waves with speakers or wave drivers. It allows the frequency (1-800 Hz) and amplitude of the sine wave to be varied. Students can observe the quantum nature of standing wave patterns as the Sine Wave Generator jumps from one resonant frequency to the next.

How to Calculate Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2?

Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 calculator uses Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2) to calculate the Output Voltage, Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 formula is used to calculate the output voltage when both diodes are not working. Output Voltage is denoted by Vout symbol.

How to calculate Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 using this online calculator? To use this online calculator for Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2, enter Input Voltage (Vin), Resistance 2 (R2) & Resistance 1 (R1) and hit the calculate button. Here is how the Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 calculation can be explained with given input values -> 1.630573 = 5.12*0.5/(0.59+0.5).

FAQ

What is Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2?
Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 formula is used to calculate the output voltage when both diodes are not working and is represented as Vout = Vin*R2/(R1+R2) or Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2). Input Voltage is the value of the voltage applied to the op-amp, Resistance 2 is the value of resistor 2 of the oscillator & Resistance 1 is the value of resistor 1 of the oscillator.
How to calculate Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2?
Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2 formula is used to calculate the output voltage when both diodes are not working is calculated using Output Voltage = Input Voltage*Resistance 2/(Resistance 1+Resistance 2). To calculate Output Voltage of Triangle to Sine Converter without Diode 1 and Diode 2, you need Input Voltage (Vin), Resistance 2 (R2) & Resistance 1 (R1). With our tool, you need to enter the respective value for Input Voltage, Resistance 2 & Resistance 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Output Voltage?
In this formula, Output Voltage uses Input Voltage, Resistance 2 & Resistance 1. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Output Voltage = Input Voltage*((Resistance 2*Resistance 3)/((Resistance 1*Resistance 2)+(Resistance 1*Resistance 3)+(Resistance 2*Resistance 3)))
  • Output Voltage = Input Voltage*((Resistance 2*Resistance 4)/((Resistance 1*Resistance 2)+(Resistance 1*Resistance 4)+(Resistance 2*Resistance 4)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!