Output Frequency in Up-Convertor Calculator

✖Power Gain for Up-Converter is ratio of output frequency and signal frequency for a parametric up converter.ⓘ Power Gain for Up-Converter [G_up]			+10% -10%
✖Gain degradation factor is a measure of the change in gain relative to the gain at the design frequency, and it is typically expressed in decibels (dB).ⓘ Gain Degradation Factor [GDF]			+10% -10%
✖Signal frequency is defined as the frequency of a signal that is containing information.ⓘ Signal Frequency [f_s]			+10% -10%

✖Output frequency is the total output frequency observed.ⓘ Output Frequency in Up-Convertor [f_o]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parametric Devices Formulas PDF PDF Image

Output Frequency in Up-Convertor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency
f_o = (G_up/GDF)*f_s
This formula uses 4 Variables

Variables Used

Output Frequency - (Measured in Hertz) - Output frequency is the total output frequency observed.
Power Gain for Up-Converter - (Measured in Decibel) - Power Gain for Up-Converter is ratio of output frequency and signal frequency for a parametric up converter.
Gain Degradation Factor - Gain degradation factor is a measure of the change in gain relative to the gain at the design frequency, and it is typically expressed in decibels (dB).
Signal Frequency - (Measured in Hertz) - Signal frequency is defined as the frequency of a signal that is containing information.

STEP 1: Convert Input(s) to Base Unit

Power Gain for Up-Converter: 8 Decibel --> 8 Decibel No Conversion Required
Gain Degradation Factor: 0.8 --> No Conversion Required
Signal Frequency: 95 Hertz --> 95 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_o = (G_up/GDF)*f_s --> (8/0.8)*95

Evaluating ... ...

f_o = 950

STEP 3: Convert Result to Output's Unit

950 Hertz --> No Conversion Required

FINAL ANSWER

950 Hertz <-- Output Frequency

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Semiconductor Devices » Parametric Devices » Output Frequency in Up-Convertor

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Parametric Devices Calculators

Power Gain for Parametric Up-Converter

LaTeX Go Power Gain for Up-Converter = (Output Frequency/Signal Frequency)*Gain Degradation Factor

Gain-Degradation Factor

LaTeX Go Gain Degradation Factor = (Signal Frequency/Output Frequency)*Power Gain for Up-Converter

Power Gain of Demodulator

LaTeX Go Power Gain of Demodulator = Signal Frequency/(Pumping Frequency+Signal Frequency)

Power Gain of Modulator

LaTeX Go Power Gain of Modulator = (Pumping Frequency+Signal Frequency)/Signal Frequency

Output Frequency in Up-Convertor Formula

LaTeX Go

Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency
f_o = (G_up/GDF)*f_s

What is the purpose of slow wave structures used in TWT amplifiers?

Slow-wave structures are special circuits that are used in microwave tubes to reduce wave velocity in a certain direction so that the electron beam and the signal wave can interact.

How to Calculate Output Frequency in Up-Convertor?

Output Frequency in Up-Convertor calculator uses Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency to calculate the Output Frequency, The Output Frequency in Up-Convertor formula is defined as the frequency of the up-converter as observed at the output of the terminal. Output Frequency is denoted by f_o symbol.

How to calculate Output Frequency in Up-Convertor using this online calculator? To use this online calculator for Output Frequency in Up-Convertor, enter Power Gain for Up-Converter (G_up), Gain Degradation Factor (GDF) & Signal Frequency (f_s) and hit the calculate button. Here is how the Output Frequency in Up-Convertor calculation can be explained with given input values -> 950 = (8/0.8)*95.

FAQ

What is Output Frequency in Up-Convertor?

The Output Frequency in Up-Convertor formula is defined as the frequency of the up-converter as observed at the output of the terminal and is represented as f_o = (G_up/GDF)*f_s or Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency. Power Gain for Up-Converter is ratio of output frequency and signal frequency for a parametric up converter, Gain degradation factor is a measure of the change in gain relative to the gain at the design frequency, and it is typically expressed in decibels (dB) & Signal frequency is defined as the frequency of a signal that is containing information.

How to calculate Output Frequency in Up-Convertor?

The Output Frequency in Up-Convertor formula is defined as the frequency of the up-converter as observed at the output of the terminal is calculated using Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency. To calculate Output Frequency in Up-Convertor, you need Power Gain for Up-Converter (G_up), Gain Degradation Factor (GDF) & Signal Frequency (f_s). With our tool, you need to enter the respective value for Power Gain for Up-Converter, Gain Degradation Factor & Signal Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search