Output Frequency in Cyclo Converter Calculator

✖Supply Frequency is the frequency of the source of AC power to the cycloconverter. It is a crucial parameter that determines the input voltage.ⓘ Supply Frequency [f_s]

+10%

-10%

✖Output Frequency of a cycloconverter is determined by the firing angle and the input frequency.ⓘ Output Frequency in Cyclo Converter [f_out]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Converters Formula PDF PDF Image

Output Frequency in Cyclo Converter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Output Frequency = 1/4*Supply Frequency
f_out = 1/4*f_s
This formula uses 2 Variables

Variables Used

Output Frequency - (Measured in Hertz) - Output Frequency of a cycloconverter is determined by the firing angle and the input frequency.
Supply Frequency - (Measured in Hertz) - Supply Frequency is the frequency of the source of AC power to the cycloconverter. It is a crucial parameter that determines the input voltage.

STEP 1: Convert Input(s) to Base Unit

Supply Frequency: 13.33 Hertz --> 13.33 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_out = 1/4*f_s --> 1/4*13.33

Evaluating ... ...

f_out = 3.3325

STEP 3: Convert Result to Output's Unit

3.3325 Hertz --> No Conversion Required

FINAL ANSWER

3.3325 Hertz <-- Output Frequency

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power Electronics » Converters » Cyclo Converters » Output Frequency in Cyclo Converter

Credits

Created by Mohamed Fazil V

Acharya institute of technology (AIT), Bengaluru

Mohamed Fazil V has created this Calculator and 50+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Cyclo Converters Calculators

RMS Value of Output Voltage of Cyclo Converter

LaTeX Go Output Voltage = Maximum Output/sqrt(2)*(1/pi*(pi-Firing Angle+sin(2*Firing Angle)/2))^(1/2)

Fundamental Output Phase Voltage of Cyclo Converter

LaTeX Go Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width)

Instantaneous Phase Voltage of Cyclo Converter

LaTeX Go Instantaneous Voltage = sqrt(2)*Phase Voltage*cos(Angular Frequency*Time period)

Output Frequency in Cyclo Converter

LaTeX Go Output Frequency = 1/4*Supply Frequency

Output Frequency in Cyclo Converter Formula

LaTeX Go

Output Frequency = 1/4*Supply Frequency
f_out = 1/4*f_s

What is Output Frequency in Cyclo Converter ?

The output frequency of a cycloconverter is determined by the firing angle and the input frequency. A cycloconverter is a type of power electronics device that converts AC power at one frequency to AC power at another frequency. The output voltage waveform of a cycloconverter is typically a series of controlled pulses, and the output frequency is related to the input frequency and the firing angle. cycloconverters can be single-phase or multi-phase, and they can be half-controlled or fully-controlled, which may affect the specific relationship between the input and output frequencies.

How to Calculate Output Frequency in Cyclo Converter?

Output Frequency in Cyclo Converter calculator uses Output Frequency = 1/4*Supply Frequency to calculate the Output Frequency, Output Frequency in Cyclo Converter is proportional to the input frequency and inversely proportional to the firing angle. This means that increasing the input frequency will also increase the output frequency, and decreasing the firing angle will also increase the output frequency. The output frequency of a cycloconverter can be either lower or higher than the input frequency. This makes cycloconverters useful for a variety of applications, such as variable-speed AC motor drives and static frequency changers. In a variable-speed AC motor drive, the output frequency of the cycloconverter is used to control the speed of the motor. By varying the output frequency, the speed of the motor can be increased or decreased. In a static frequency changer, the output frequency of the cycloconverter is used to convert AC power from one frequency to another. This can be useful for applications where AC power is available at one frequency but is needed at another frequency. Output Frequency is denoted by f_out symbol.

How to calculate Output Frequency in Cyclo Converter using this online calculator? To use this online calculator for Output Frequency in Cyclo Converter, enter Supply Frequency (f_s) and hit the calculate button. Here is how the Output Frequency in Cyclo Converter calculation can be explained with given input values -> 3.3325 = 1/4*13.33.

FAQ

What is Output Frequency in Cyclo Converter?

Output Frequency in Cyclo Converter is proportional to the input frequency and inversely proportional to the firing angle. This means that increasing the input frequency will also increase the output frequency, and decreasing the firing angle will also increase the output frequency. The output frequency of a cycloconverter can be either lower or higher than the input frequency. This makes cycloconverters useful for a variety of applications, such as variable-speed AC motor drives and static frequency changers. In a variable-speed AC motor drive, the output frequency of the cycloconverter is used to control the speed of the motor. By varying the output frequency, the speed of the motor can be increased or decreased. In a static frequency changer, the output frequency of the cycloconverter is used to convert AC power from one frequency to another. This can be useful for applications where AC power is available at one frequency but is needed at another frequency and is represented as f_out = 1/4*f_s or Output Frequency = 1/4*Supply Frequency. Supply Frequency is the frequency of the source of AC power to the cycloconverter. It is a crucial parameter that determines the input voltage.

How to calculate Output Frequency in Cyclo Converter?

Output Frequency in Cyclo Converter is proportional to the input frequency and inversely proportional to the firing angle. This means that increasing the input frequency will also increase the output frequency, and decreasing the firing angle will also increase the output frequency. The output frequency of a cycloconverter can be either lower or higher than the input frequency. This makes cycloconverters useful for a variety of applications, such as variable-speed AC motor drives and static frequency changers. In a variable-speed AC motor drive, the output frequency of the cycloconverter is used to control the speed of the motor. By varying the output frequency, the speed of the motor can be increased or decreased. In a static frequency changer, the output frequency of the cycloconverter is used to convert AC power from one frequency to another. This can be useful for applications where AC power is available at one frequency but is needed at another frequency is calculated using Output Frequency = 1/4*Supply Frequency. To calculate Output Frequency in Cyclo Converter, you need Supply Frequency (f_s). With our tool, you need to enter the respective value for Supply Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search