Outflow at End of Time Interval given Average Inflow Calculator

✖Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time.ⓘ Average Outflow [Q_avg]			+10% -10%
✖Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.ⓘ Outflow at the Beginning of Time Interval [Q₁]			+10% -10%

✖Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.ⓘ Outflow at End of Time Interval given Average Inflow [Q₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Basic Equations of Flood Routing Formulas PDF PDF Image

Outflow at End of Time Interval given Average Inflow Solution

STEP 0: Pre-Calculation Summary

Formula Used

Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval
Q₂ = 2*Q_avg-Q₁
This formula uses 3 Variables

Variables Used

Outflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.
Average Outflow - (Measured in Cubic Meter per Second) - Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time.
Outflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.

STEP 1: Convert Input(s) to Base Unit

Average Outflow: 56 Cubic Meter per Second --> 56 Cubic Meter per Second No Conversion Required
Outflow at the Beginning of Time Interval: 48 Cubic Meter per Second --> 48 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q₂ = 2*Q_avg-Q₁ --> 2*56-48

Evaluating ... ...

Q₂ = 64

STEP 3: Convert Result to Output's Unit

64 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

64 Cubic Meter per Second <-- Outflow at the End of Time Interval

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Flood Routing » Basic Equations of Flood Routing » Outflow at End of Time Interval given Average Inflow

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Basic Equations of Flood Routing Calculators

Average Outflow in Time given Change in Storage

LaTeX Go Average Outflow = (Average Inflow*Time Interval-Change in Storage Volumes)/Time Interval

Average Inflow given Change in Storage

LaTeX Go Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval

Average Outflow Denoting Beginning and End of Time Interval

LaTeX Go Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2

Average Inflow Denoting at Beginning and End of Time Interval

LaTeX Go Average Inflow = (Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2

Outflow at End of Time Interval given Average Inflow Formula

LaTeX Go

Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval
Q₂ = 2*Q_avg-Q₁

What is Flood Routing?

Flood routing is a procedure to determine the time and magnitude of flow (i.e., the flow hydrograph) at a point on a watercourse from known or assumed hydrographs at one or more points upstream. The procedure is specifically known as flood routing if the flow is a flood.

How to Calculate Outflow at End of Time Interval given Average Inflow?

Outflow at End of Time Interval given Average Inflow calculator uses Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval to calculate the Outflow at the End of Time Interval, The Outflow at End of Time Interval given Average Inflow formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system. Outflow at the End of Time Interval is denoted by Q₂ symbol.

How to calculate Outflow at End of Time Interval given Average Inflow using this online calculator? To use this online calculator for Outflow at End of Time Interval given Average Inflow, enter Average Outflow (Q_avg) & Outflow at the Beginning of Time Interval (Q₁) and hit the calculate button. Here is how the Outflow at End of Time Interval given Average Inflow calculation can be explained with given input values -> 64 = 2*56-48.

FAQ

What is Outflow at End of Time Interval given Average Inflow?

The Outflow at End of Time Interval given Average Inflow formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system and is represented as Q₂ = 2*Q_avg-Q₁ or Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval. Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time & Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.

How to calculate Outflow at End of Time Interval given Average Inflow?

The Outflow at End of Time Interval given Average Inflow formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system is calculated using Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval. To calculate Outflow at End of Time Interval given Average Inflow, you need Average Outflow (Q_avg) & Outflow at the Beginning of Time Interval (Q₁). With our tool, you need to enter the respective value for Average Outflow & Outflow at the Beginning of Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search