Parts of the knuckle joint
A knuckle joint always has a fork end, an eye end, and a pin. Typically, these are all specially made parts although standard rod ends are sometimes used for the eye end. This has the advantage that a rod end allows some additional rotational movement perpendicular to the pin axis, providing further protection against bending stress.
Various types of pins can also be used. The most common is a special pin with a shoulder at one end and a cross hole at the other to accept a collar and split pint. For large structures, such as bridges, cold rivets were historically used. The pivot may also be bolted.
How to Calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye?
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye calculator uses Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint) to calculate the Outer Diameter of Eye of Knuckle Joint, The Outer diameter of eye of knuckle joint given tensile stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. Outer Diameter of Eye of Knuckle Joint is denoted by do symbol.
How to calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye using this online calculator? To use this online calculator for Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye, enter Diameter of Knuckle Pin (d), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Tensile Stress in Eye of Knuckle Joint (σte) and hit the calculate button. Here is how the Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye calculation can be explained with given input values -> 62081.51 = 0.037+45000/(0.0443*45000000).