LCM of two numbers

Operation D.O Level when Correction Factor is 0.85 Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Treatment of Sewage Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Oxygen Requirement of the Aeration Tanks Constant Velocity Horizontal Flow Grit Channels Design of Conical Humus Tank Design of Continuous Flow Type of Sedimentation Tank More >>

⤿

Operation D.O Level Important Formulas of Oxygen Requirement of the Aeration Tank BOD to Ultimate BOD BOD5 More >>

✖D.O Saturation when Correction Factor is 0.85 is the maximum concentration of dissolved oxygen, when the actual D.O. saturation level in sewage is 85% of the theoretical D.O. saturation level.ⓘ D.O Saturation when Correction Factor is 0.85 [DO_0.85]			+10% -10%
✖Oxygen Transferred is the amount of oxygen that is moved from the air into the water.ⓘ Oxygen Transferred [N]			+10% -10%
✖Oxygen Transfer Capacity is the ability of a system, typically in a wastewater treatment context, to transfer oxygen from the air into the water.ⓘ Oxygen Transfer Capacity [N^s]			+10% -10%
✖Temperature is the degree or intensity of heat present in a substance or object.ⓘ Temperature [T]			+10% -10%

✖Operation Dissolved Oxygen is the amount of oxygen that is present in water. It is a crucial parameter in assessing water quality because it is essential for the survival of aquatic organisms.ⓘ Operation D.O Level when Correction Factor is 0.85 [D^L]

⎘ Copy

👎

Formula

✖

Operation D.O Level when Correction Factor is 0.85

Formula

D L = DO 0.85 - (\frac{N \cdot 9.17}{N s \cdot 0.85 \cdot {(1.024)}^{T - 20}})

Example

2.004543 mg/L = 3414.55 mg/L - (\frac{3 kg/h/kW \cdot 9.17}{2.03 kg/h/kW \cdot 0.85 \cdot {(1.024)}^{85 K - 20}})

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Operation D.O Level when Correction Factor is 0.85 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.85-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.85*(1.024)^(Temperature-20)))
D^L = DO_0.85-((N*9.17)/(N^s*0.85*(1.024)^(T-20)))
This formula uses 5 Variables

Variables Used

Operation Dissolved Oxygen - (Measured in Kilogram per Cubic Meter) - Operation Dissolved Oxygen is the amount of oxygen that is present in water. It is a crucial parameter in assessing water quality because it is essential for the survival of aquatic organisms.
D.O Saturation when Correction Factor is 0.85 - (Measured in Kilogram per Cubic Meter) - D.O Saturation when Correction Factor is 0.85 is the maximum concentration of dissolved oxygen, when the actual D.O. saturation level in sewage is 85% of the theoretical D.O. saturation level.
Oxygen Transferred - (Measured in Kilogram per Second per Watt) - Oxygen Transferred is the amount of oxygen that is moved from the air into the water.
Oxygen Transfer Capacity - (Measured in Kilogram per Second per Watt) - Oxygen Transfer Capacity is the ability of a system, typically in a wastewater treatment context, to transfer oxygen from the air into the water.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.

STEP 1: Convert Input(s) to Base Unit

D.O Saturation when Correction Factor is 0.85: 3414.55 Milligram per Liter --> 3.41455 Kilogram per Cubic Meter (Check conversion here)
Oxygen Transferred: 3 Kilogram per Hour per Kilowatt --> 8.33333333333333E-07 Kilogram per Second per Watt (Check conversion here)
Oxygen Transfer Capacity: 2.03 Kilogram per Hour per Kilowatt --> 5.63888888888889E-07 Kilogram per Second per Watt (Check conversion here)
Temperature: 85 Kelvin --> 85 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D^L = DO_0.85-((N*9.17)/(N^s*0.85*(1.024)^(T-20))) --> 3.41455-((8.33333333333333E-07*9.17)/(5.63888888888889E-07*0.85*(1.024)^(85-20)))

Evaluating ... ...

D^L = 0.00200454265854555

STEP 3: Convert Result to Output's Unit

0.00200454265854555 Kilogram per Cubic Meter -->2.00454265854555 Milligram per Liter (Check conversion here)

FINAL ANSWER

2.00454265854555 ≈ 2.004543 Milligram per Liter <-- Operation Dissolved Oxygen

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Sewage » Oxygen Requirement of the Aeration Tanks » Operation D.O Level » Operation D.O Level when Correction Factor is 0.85

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Operation D.O Level Calculators

Operation Dissolved Oxygen Level

Go Operation Dissolved Oxygen = Dissolved Oxygen Saturation-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*Correction Factor*(1.024)^(Temperature-20)))

Operation D.O Level when Correction Factor is 0.85

Go Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.85-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.85*(1.024)^(Temperature-20)))

Operation D.O Level when Correction Factor is 0.8

Go Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.8-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.8*(1.024)^(Temperature-20)))

Correction Factor

Go Correction Factor = Oxygen Transferred/((Oxygen Transfer Capacity*Difference between Saturation DO and Operation DO*(1.024)^(Temperature-20))/(9.17))

Operation D.O Level when Correction Factor is 0.85 Formula

What is Dissolved Oxygen?

Dissolved Oxygen is the amount of gaseous oxygen (O2) dissolved in the water. Oxygen enters the water by direct absorption from the atmosphere, by rapid movement, or as a waste product of plant photosynthesis.

How to Calculate Operation D.O Level when Correction Factor is 0.85?

Operation D.O Level when Correction Factor is 0.85 calculator uses Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.85-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.85*(1.024)^(Temperature-20))) to calculate the Operation Dissolved Oxygen, The Operation D.O Level when Correction Factor is 0.85 formula is defined as the operational dissolved oxygen (D.O.) concentration in water treatment or environmental monitoring, adjusted using a correction factor of 0.85. Operation Dissolved Oxygen is denoted by D^L symbol.

How to calculate Operation D.O Level when Correction Factor is 0.85 using this online calculator? To use this online calculator for Operation D.O Level when Correction Factor is 0.85, enter D.O Saturation when Correction Factor is 0.85 (DO_0.85), Oxygen Transferred (N), Oxygen Transfer Capacity (N^s) & Temperature (T) and hit the calculate button. Here is how the Operation D.O Level when Correction Factor is 0.85 calculation can be explained with given input values -> 2004.543 = 3.41455-((8.33333333333333E-07*9.17)/(5.63888888888889E-07*0.85*(1.024)^(85-20))).

FAQ

What is Operation D.O Level when Correction Factor is 0.85?

The Operation D.O Level when Correction Factor is 0.85 formula is defined as the operational dissolved oxygen (D.O.) concentration in water treatment or environmental monitoring, adjusted using a correction factor of 0.85 and is represented as D^L = DO_0.85-((N*9.17)/(N^s*0.85*(1.024)^(T-20))) or Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.85-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.85*(1.024)^(Temperature-20))). D.O Saturation when Correction Factor is 0.85 is the maximum concentration of dissolved oxygen, when the actual D.O. saturation level in sewage is 85% of the theoretical D.O. saturation level, Oxygen Transferred is the amount of oxygen that is moved from the air into the water, Oxygen Transfer Capacity is the ability of a system, typically in a wastewater treatment context, to transfer oxygen from the air into the water & Temperature is the degree or intensity of heat present in a substance or object.

How to calculate Operation D.O Level when Correction Factor is 0.85?

The Operation D.O Level when Correction Factor is 0.85 formula is defined as the operational dissolved oxygen (D.O.) concentration in water treatment or environmental monitoring, adjusted using a correction factor of 0.85 is calculated using Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.85-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.85*(1.024)^(Temperature-20))). To calculate Operation D.O Level when Correction Factor is 0.85, you need D.O Saturation when Correction Factor is 0.85 (DO_0.85), Oxygen Transferred (N), Oxygen Transfer Capacity (N^s) & Temperature (T). With our tool, you need to enter the respective value for D.O Saturation when Correction Factor is 0.85, Oxygen Transferred, Oxygen Transfer Capacity & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Operation Dissolved Oxygen?

In this formula, Operation Dissolved Oxygen uses D.O Saturation when Correction Factor is 0.85, Oxygen Transferred, Oxygen Transfer Capacity & Temperature. We can use 2 other way(s) to calculate the same, which is/are as follows -

Operation Dissolved Oxygen = Dissolved Oxygen Saturation-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*Correction Factor*(1.024)^(Temperature-20)))
Operation Dissolved Oxygen = D.O Saturation when Correction Factor is 0.8-((Oxygen Transferred*9.17)/(Oxygen Transfer Capacity*0.8*(1.024)^(Temperature-20)))

Home

FREE PDFs

🔍 Search