Number of tubes in transverse fin heat exchanger Calculator

✖Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units.ⓘ Mass Flow Rate [m]			+10% -10%
✖Mass flux(g) is defined as the amount of mass transported per unit time across a unit area that is perpendicular to the direction of mass transport.ⓘ Mass Flux(g) [G]			+10% -10%
✖Distance between two consequent tubes is the centre distance between the two tubes in a heat exchanger.ⓘ Distance between two Consequent Tubes [TP]			+10% -10%
✖Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Crack [h_c]			+10% -10%

✖Number of tubes is the total count of the tubes.ⓘ Number of tubes in transverse fin heat exchanger [N]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat and Mass Transfer Formula PDF PDF Image

Number of tubes in transverse fin heat exchanger Solution

STEP 0: Pre-Calculation Summary

Formula Used

Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack)
N = m/(G*TP*h_c)
This formula uses 5 Variables

Variables Used

Number of Tubes - Number of tubes is the total count of the tubes.
Mass Flow Rate - (Measured in Kilogram per Second) - Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units.
Mass Flux(g) - (Measured in Kilogram per Second per Square Meter) - Mass flux(g) is defined as the amount of mass transported per unit time across a unit area that is perpendicular to the direction of mass transport.
Distance between two Consequent Tubes - (Measured in Meter) - Distance between two consequent tubes is the centre distance between the two tubes in a heat exchanger.
Height of Crack - (Measured in Meter) - Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

STEP 1: Convert Input(s) to Base Unit

Mass Flow Rate: 4 Kilogram per Second --> 4 Kilogram per Second No Conversion Required
Mass Flux(g): 22.8 Kilogram per Second per Square Meter --> 22.8 Kilogram per Second per Square Meter No Conversion Required
Distance between two Consequent Tubes: 0.06 Meter --> 0.06 Meter No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N = m/(G*TP*h_c) --> 4/(22.8*0.06*12)

Evaluating ... ...

N = 0.243664717348928

STEP 3: Convert Result to Output's Unit

0.243664717348928 --> No Conversion Required

FINAL ANSWER

0.243664717348928 ≈ 0.243665 <-- Number of Tubes

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Heat Exchanger » Transverse Fin Heat Exchanger » Mechanical » Fin Parameters » Number of tubes in transverse fin heat exchanger

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Fin Parameters Calculators

Number of tubes in transverse fin heat exchanger

LaTeX Go Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack)

Distance between two consequent tubes in transverse fin heat exchanger

LaTeX Go Distance between two Consequent Tubes = Mass Flow Rate/(Mass Flux(g)*Number of Tubes*Length)

Length of tube bank

LaTeX Go Length = Mass Flow Rate/(Mass Flux(g)*Number of Tubes*Distance between two Consequent Tubes)

Equivalent diameter of tube for transverse fin heat exchanger

LaTeX Go Equivalent Diameter = (Reynolds Number(e)*Viscosity of Fluid)/(Mass Flux)

Number of tubes in transverse fin heat exchanger Formula

LaTeX Go

Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack)
N = m/(G*TP*h_c)

What is Heat exchanger?

A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.

How to Calculate Number of tubes in transverse fin heat exchanger?

Number of tubes in transverse fin heat exchanger calculator uses Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack) to calculate the Number of Tubes, The Number of tubes in transverse fin heat exchanger formula is defined as the count of how many tubes are required for the heat exchanger. Number of Tubes is denoted by N symbol.

How to calculate Number of tubes in transverse fin heat exchanger using this online calculator? To use this online calculator for Number of tubes in transverse fin heat exchanger, enter Mass Flow Rate (m), Mass Flux(g) (G), Distance between two Consequent Tubes (TP) & Height of Crack (h_c) and hit the calculate button. Here is how the Number of tubes in transverse fin heat exchanger calculation can be explained with given input values -> 0.243665 = 4/(22.8*0.06*12).

FAQ

What is Number of tubes in transverse fin heat exchanger?

The Number of tubes in transverse fin heat exchanger formula is defined as the count of how many tubes are required for the heat exchanger and is represented as N = m/(G*TP*h_c) or Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack). Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units, Mass flux(g) is defined as the amount of mass transported per unit time across a unit area that is perpendicular to the direction of mass transport, Distance between two consequent tubes is the centre distance between the two tubes in a heat exchanger & Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

How to calculate Number of tubes in transverse fin heat exchanger?

The Number of tubes in transverse fin heat exchanger formula is defined as the count of how many tubes are required for the heat exchanger is calculated using Number of Tubes = Mass Flow Rate/(Mass Flux(g)*Distance between two Consequent Tubes*Height of Crack). To calculate Number of tubes in transverse fin heat exchanger, you need Mass Flow Rate (m), Mass Flux(g) (G), Distance between two Consequent Tubes (TP) & Height of Crack (h_c). With our tool, you need to enter the respective value for Mass Flow Rate, Mass Flux(g), Distance between two Consequent Tubes & Height of Crack and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search