Number of Scrapers Pusher can Load Calculator

✖Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around.ⓘ Scraper Cycle Time [T_s]			+10% -10%
✖Pusher Cycle Time consists of maneuver time and load time.ⓘ Pusher Cycle Time [T_p]			+10% -10%

✖Number of Scraper a Pusher can load calculates the scraper number when scraper and pusher cycle time is known.ⓘ Number of Scrapers Pusher can Load [N_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Number of Scrapers Pusher can Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time)
N_p = (T_s/T_p)
This formula uses 3 Variables

Variables Used

Number of Scraper a Pusher - Number of Scraper a Pusher can load calculates the scraper number when scraper and pusher cycle time is known.
Scraper Cycle Time - (Measured in Second) - Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around.
Pusher Cycle Time - (Measured in Second) - Pusher Cycle Time consists of maneuver time and load time.

STEP 1: Convert Input(s) to Base Unit

Scraper Cycle Time: 7.2 Minute --> 432 Second (Check conversion here)
Pusher Cycle Time: 3.01 Minute --> 180.6 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_p = (T_s/T_p) --> (432/180.6)

Evaluating ... ...

N_p = 2.39202657807309

STEP 3: Convert Result to Output's Unit

2.39202657807309 --> No Conversion Required

FINAL ANSWER

2.39202657807309 ≈ 2.392027 <-- Number of Scraper a Pusher

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Number of Scrapers Pusher can Load

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Number of Scrapers Pusher can Load Formula

LaTeX Go

Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time)
N_p = (T_s/T_p)

What is Scrapers?

Scraper, in engineering, machine for moving earth over short distances (up to about two miles) over relatively smooth areas. Either self-propelled or towed, it consists of a wagon with a gate having a bladed bottom. The blade scrapes up earth as the wagon pushes forward and forces the excavated material into the wagon.

How to Calculate Number of Scrapers Pusher can Load?

Number of Scrapers Pusher can Load calculator uses Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time) to calculate the Number of Scraper a Pusher, The Number of Scrapers Pusher can Load is defined as the scraper number when scraper and pusher cycle time is known. Number of Scraper a Pusher is denoted by N_p symbol.

How to calculate Number of Scrapers Pusher can Load using this online calculator? To use this online calculator for Number of Scrapers Pusher can Load, enter Scraper Cycle Time (T_s) & Pusher Cycle Time (T_p) and hit the calculate button. Here is how the Number of Scrapers Pusher can Load calculation can be explained with given input values -> 2.4 = (432/180.6).

FAQ

What is Number of Scrapers Pusher can Load?

The Number of Scrapers Pusher can Load is defined as the scraper number when scraper and pusher cycle time is known and is represented as N_p = (T_s/T_p) or Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time). Scraper Cycle Time is estimated by adding the fixed times to load, dumps, and turn around & Pusher Cycle Time consists of maneuver time and load time.

How to calculate Number of Scrapers Pusher can Load?

The Number of Scrapers Pusher can Load is defined as the scraper number when scraper and pusher cycle time is known is calculated using Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time). To calculate Number of Scrapers Pusher can Load, you need Scraper Cycle Time (T_s) & Pusher Cycle Time (T_p). With our tool, you need to enter the respective value for Scraper Cycle Time & Pusher Cycle Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search