Number of rivets covered per pitch length given strength of joint for single shear lap joint Calculator

✖Strength of joint is the strength of riveted joint per pitch length.ⓘ Strength of Joint [S]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖Safe shear stress is always less than the yield shear stress.ⓘ Safe Shear Stress [T_safe]			+10% -10%

✖Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.ⓘ Number of rivets covered per pitch length given strength of joint for single shear lap joint [n]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Number of rivets covered per pitch length given strength of joint for single shear lap joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Number of Rivets Per Pitch = Strength of Joint/((1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress))
n = S/((1*(pi/4)*(D_rivet^2)*T_safe))
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Number of Rivets Per Pitch - Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.
Strength of Joint - (Measured in Newton) - Strength of joint is the strength of riveted joint per pitch length.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.

STEP 1: Convert Input(s) to Base Unit

Strength of Joint: 8.6 Kilonewton --> 8600 Newton (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Safe Shear Stress: 0.24 Megapascal --> 240000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

n = S/((1*(pi/4)*(D_rivet^2)*T_safe)) --> 8600/((1*(pi/4)*(0.018^2)*240000))

Evaluating ... ...

n = 140.816101912582

STEP 3: Convert Result to Output's Unit

140.816101912582 --> No Conversion Required

FINAL ANSWER

140.816101912582 ≈ 140.8161 <-- Number of Rivets Per Pitch

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Shearing of Rivet » Number of rivets covered per pitch length given strength of joint for single shear lap joint

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))

Diameter of rivet given safe load per pitch length in double rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))

Safe Load per Pitch Length using Single Rivet Lap Joint

LaTeX Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Lap Joint

LaTeX Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Number of rivets covered per pitch length given strength of joint for single shear lap joint Formula

LaTeX Go

Number of Rivets Per Pitch = Strength of Joint/((1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress))
n = S/((1*(pi/4)*(D_rivet^2)*T_safe))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Number of rivets covered per pitch length given strength of joint for single shear lap joint?

Number of rivets covered per pitch length given strength of joint for single shear lap joint calculator uses Number of Rivets Per Pitch = Strength of Joint/((1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)) to calculate the Number of Rivets Per Pitch, The Number of rivets covered per pitch length given strength of joint for single shear lap joint formula is defined as the number of rivets required in a joint. Number of Rivets Per Pitch is denoted by n symbol.

How to calculate Number of rivets covered per pitch length given strength of joint for single shear lap joint using this online calculator? To use this online calculator for Number of rivets covered per pitch length given strength of joint for single shear lap joint, enter Strength of Joint (S), Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe) and hit the calculate button. Here is how the Number of rivets covered per pitch length given strength of joint for single shear lap joint calculation can be explained with given input values -> 79.20906 = 8600/((1*(pi/4)*(0.018^2)*240000)).

FAQ

What is Number of rivets covered per pitch length given strength of joint for single shear lap joint?

The Number of rivets covered per pitch length given strength of joint for single shear lap joint formula is defined as the number of rivets required in a joint and is represented as n = S/((1*(pi/4)*(D_rivet^2)*T_safe)) or Number of Rivets Per Pitch = Strength of Joint/((1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)). Strength of joint is the strength of riveted joint per pitch length, Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & Safe shear stress is always less than the yield shear stress.

How to calculate Number of rivets covered per pitch length given strength of joint for single shear lap joint?

The Number of rivets covered per pitch length given strength of joint for single shear lap joint formula is defined as the number of rivets required in a joint is calculated using Number of Rivets Per Pitch = Strength of Joint/((1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)). To calculate Number of rivets covered per pitch length given strength of joint for single shear lap joint, you need Strength of Joint (S), Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe). With our tool, you need to enter the respective value for Strength of Joint, Rivet Diameter & Safe Shear Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Number of Rivets Per Pitch?

In this formula, Number of Rivets Per Pitch uses Strength of Joint, Rivet Diameter & Safe Shear Stress. We can use 1 other way(s) to calculate the same, which is/are as follows -

Number of Rivets Per Pitch = Strength of Joint/((2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress))

Home

FREE PDFs

🔍 Search